Paslode 515500 - User Manual
Paslode 515500 Nailer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INTRODUCTION; The PASLODE; fully understand the operation of this tool.; TOOL WARRANTY AND LIMITATIONS; This warranty is limited to tools sold and service requested
- Page 3 – disconnected from the air supply.; OPERATING AIR PRESSURE:; for best tool performance.; NAIL LENGTH; TOOL AND FASTENER SPECIFICATIONS
- Page 4 – WARNING; SAFETY INSTRUCTIONS; SAFETY FIRST
- Page 5 – Fasteners; The Paslode T250S-F16P Finish Nailer drives; Loading Fasteners; Disconnect the air supply.; Clearing a Jam; TOOL OPERATION; Lockout Feature
- Page 6 – Reversible Belt Hook:; Sequential; Operation; Driving
- Page 7 – MAINTENANCE; Cold Weather Care
- Page 8 – Prevent accumulation of
- Page 9 – OPERATOR TROUBLESHOOTING; PROBLEM
- Page 10 – PARTS LEGEND
- Page 12 – Safety Glasses; ACCESSORIES
MODEL T250S-F16P
16 Gauge Straight
Finish Nailer
IMPORTANT!
DO NOT DESTROY
It is the customerʼs responsibility to have all
operators and service personnel read and
understand this manual.
OPERATING MANUAL AND
TOOL SCHEMATIC
P
Part No. 515500
219495-1
08/17
PRINTED IN TAIWAN
© 2017, Illinois Tool Works Inc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INTRODUCTION The PASLODE ® T250S-F16P finish nailer is a quality-built tool designed for use in residential trim applications. This tool will deliver efficient, dependable performance when used according to the manufactures guidelines. Please study this manual including the safety instructions to ...
TOOL SPECIFICATIONS MODEL NO. T250S-F16P (Part# 515500) HEIGHT 11.6" WIDTH 2.9" LENGTH 12.3" WEIGHT 3.9lbs. OPERATING PRESSURE 80 to 120 p.s.i. (5.5 to 8.3 bars) FASTENER SPECIFICATIONS TOOL AIR FITTINGS : This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .28” (7mm) o...
4 WARNING Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property. Contact your local Paslode Representative for pr esentation of Paslodeʼs Safety Awareness Program SAFETY INSTRUCTIONS SAFETY FIRST These ...
