Page 2 - Introduction; About this Programming Manual; Section 2, PT Programming; References Found in the PT Programming Manual; PT Programming Manual References; Links to Other Pages and Manuals; WARNING
2 PT Programming Manual Introduction About this Programming Manual The PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display. The PT Programming Manual is divided into the following sections: Sec...
Page 3 - NOTES
PT Programming Manual 3 NOTES • The contents of this manual apply to PBXs with a cer tain software version, as indicated on the cover of this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) Software Version Reference . • Some optional service cards, PTs, and feat...
Page 4 - Table of Contents
4 PT Programming Manual Table of Contents 1 Overview.................................................................................................. 9 1.1 Introduction .................................................................................................................... 10 1.1.1 Intr...
Page 9 - Section
PT Programming Manual 9 Section 1 Overview This section provides an overview of programming the PBX.
Page 10 - Ways to Programme
1.1 Introduction 10 PT Programming Manual 1.1 Introduction 1.1.1 Introduction These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your...
Page 11 - Password Security
1.1 Introduction PT Programming Manual 11 1.1.2 Password Security To maintain system security, system passwords are required to access certain programming functions of the PBX. By giving different users access to different passwords, it is possible to control the amount of programming that each user...
Page 12 - Entering Characters
1.1 Introduction 12 PT Programming Manual 1.1.3 Entering Characters The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available by pushing each button a specific number of times. Table 1 (Standard mode) Ta...
Page 18 - PT Programming; Programming Instructions; Required Telephone/Extension; Buttons and Functions
2.1 PT Programming 18 PT Programming Manual 2.1 PT Programming 2.1.1 Programming Instructions Required Telephone/Extension PBX settings can be customised through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the...
Page 19 - Entering System Programming Mode; System Password for Administrator; —for PT Programming; System Password for User
2.1 PT Programming PT Programming Manual 19 Entering System Programming Mode Using a PT to perform system programming allows an authorised extension user to set a wide range of PBX features and parameters.There are two levels of system programming that can be performed with a PT: administrator-level...
Page 21 - Maximum Values; Extension Numbers (Including Feature Numbers); KX-TDA30 Slot and Port Values; Available Slot Entry Values
2.1 PT Programming PT Programming Manual 21 2.1.2 Maximum Values Throughout this manual, maximum entry values are shown for each programming item. When maximum entry values for one or more of the supported PBX models differ, these differences are listed within the programming item, as shown in the e...
Page 24 - Basic Programming; Name
2.1 PT Programming 24 PT Programming Manual 2.1.3 Basic Programming [000] Date & Time [In 12-hour Format] [In 24-hour Format] [001] System Speed Dialling Number [002] System Speed Dialling Name [003] Extension Number [000] 00–99 Year 01–31 Date 01–12 Hour 00–59 Minute END (HOLD) ENTER ENTER ENTE...
Page 25 - PIN
2.1 PT Programming PT Programming Manual 25 Notes • Extensions that will have a mailbox using a VM in DPT integration must have extension numbers of 2–4 digits. • Extension numbers of PSs can be a maximum of 4 digits. • If PC Phone, PC Console, or a CTI application is running on a PC connected to an...
Page 26 - Message; Charge Rate
2.1 PT Programming 26 PT Programming Manual • If one or more SDN buttons have been set at the DSS Console, they must be deleted before this setting can be changed (KX-TDA100/KX-TDA200/KX-TDA600 only). [008] Absent Message [010] Charge Margin [011] Charge Tax [012] Charge Rate per Unit [008] 1–8 Loca...
Page 27 - System Management Programming
2.1 PT Programming PT Programming Manual 27 2.1.4 System Management Programming [100] Flexible Numbering [101] Time Service Switching Mode [102] Time Service Starting Time [In 12-hour Format] [100] 01–68 Location No. Feature No. END (HOLD) ENTER ENTER CANCEL NEXT To the Next Location No. To the Desi...
Page 28 - [110] System Password for Administrator—for PT Programming
2.1 PT Programming 28 PT Programming Manual [In 24-hour Format] [103] Idle Line Access (Local Access) [110] System Password for Administrator—for PT Programming [111] System Password for User—for PT Programming [112] Manager Password [120] Verification Code [102] 00:00–23:59 Hour:Minute END ENTER EN...
Page 29 - [130] Decimal Point Position for Currency; Currency
2.1 PT Programming PT Programming Manual 29 [121] Verification Code Name [122] Verification Code Personal Identification Number (PIN) WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or exten...
Page 30 - MPR Version
2.1 PT Programming 30 PT Programming Manual [190] Main Processing (MPR) Software Version Reference [190] Reference only MPR Version END ENTER
Page 31 - Timer Programming
2.1 PT Programming PT Programming Manual 31 2.1.5 Timer Programming [200] Hold Recall Time [201] Transfer Recall Time [203] Intercept Time [204] Hot Line Waiting Time [205] Automatic Redial Repeat Times [206] Automatic Redial Interval [207] Door Unlock Time [200] 0–240 s Time END (HOLD) ENTER ENTER ...
Page 32 - [208] Call Duration Count Starting Time for LCOT; Time
2.1 PT Programming 32 PT Programming Manual [208] Call Duration Count Starting Time for LCOT [209] DISA Delayed Answer Time [210] DISA Trunk-to-Trunk Call Prolong Time [211] DISA Intercept Time [208] 0–60 s Time END ENTER ENTER [209] 0–30 s Time END ENTER ENTER [210] 0–7 min Time END ENTER ENTER [21...
Page 33 - Denied Code; Exception Code
2.1 PT Programming PT Programming Manual 33 2.1.6 TRS/Barring/ARS Programming [300] TRS/Barring Override by System Speed Dialling [301] TRS/Barring Denied Code [302] TRS/Barring Exception Code [303] Special Carrier Access Code [304] Emergency Number [320] ARS Mode [300] Disable/Enable END (HOLD) SEL...
Page 35 - [352] ARS Removed Number of Digits for Carrier Access; Priority; Digits to Remove
2.1 PT Programming PT Programming Manual 35 [331–346] ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX-TDA200 only) [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) [350] ARS Carrier Name [351] ARS Trunk Group for Carrier Access [352] ARS Removed Number of Digits for Carrier Access [331–346]...
Page 36 - Carrier Access Code
2.1 PT Programming 36 PT Programming Manual [353] ARS Carrier Access Code [353] Carrier Table No. Max. 32 digits Carrier Access Code END ENTER ENTER KX-TDA30: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
Page 37 - Trunk Programming
2.1 PT Programming PT Programming Manual 37 2.1.7 Trunk Programming [400] LCOT/BRI Trunk Connection [401] LCOT/BRI Trunk Name [402] LCOT/BRI Trunk Group Number [409] LCOT/BRI Trunk Number Reference [410] LCOT Dialling Mode [411] LCOT Pulse Rate ENTER ENTER [400] No Connect/ Connect END (HOLD) SELECT...
Page 38 - [413] LCOT CPC Signal Detection Time—Outgoing
2.1 PT Programming 38 PT Programming Manual [412] LCOT DTMF Minimum Duration [413] LCOT CPC Signal Detection Time—Outgoing [414] LCOT CPC Signal Detection Time—Incoming [415] LCOT Reverse Circuit [416] LCOT Pause Time [417] LCOT Flash/Recall Time [418] LCOT Disconnect Time [412] 80/160 ms END SELECT...
Page 39 - Network Type
2.1 PT Programming PT Programming Manual 39 [420] BRI Network Type [421] BRI DIL/DDI/MSN Selection [422] BRI Subscriber Number [424] BRI Layer 1 Active Mode Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [425] BRI Layer 2 Active Mode Note After changing th...
Page 40 - TEI
2.1 PT Programming 40 PT Programming Manual [427] BRI TEI Mode Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [450] DIL 1:1 Destination [451] DID Number [452] DID Name [453] DID Destination ENTER ENTER [427] Slot No. Port No. 00–63 (for Fix)/ TEI END ENTER...
Page 41 - Host PBX Access Code
2.1 PT Programming PT Programming Manual 41 [471] Host PBX Access Code [472] Extension-to-Trunk Call Duration [473] Trunk-to-Trunk Call Duration [475] DISA Silence Detection [476] DISA Continuous Signal Detection [477] DISA Cyclic Signal Detection [471] Trunk Group No. 01–10 Location No. Max.10 digi...
Page 43 - COS Programming; Level
2.1 PT Programming PT Programming Manual 43 2.1.8 COS Programming [500] Trunk Group Number [501] TRS/Barring Level [502] Trunk Call Duration Limitation [503] Call Transfer to Trunk [504] Call Forwarding to Trunk [500] 1 Day/2 Lunch/3 Break/4 Night 01–64 COS No. Time No. Trunk Group No. Disable/Enabl...
Page 45 - [515] Wireless XDP Parallel Mode for Paired Telephone
2.1 PT Programming PT Programming Manual 45 [512] Permission for Door Open Access [514] Time Service Manual Switching [515] Wireless XDP Parallel Mode for Paired Telephone [516] Programming Mode Limitation Disable/ Enable SELECT [512] 01–64 COS No. END ENTER ENTER [514] 01–64 COS No. END Disable/ En...
Page 46 - Extension Programming
2.1 PT Programming 46 PT Programming Manual 2.1.9 Extension Programming [600] EXtra Device Port (XDP) Mode [601] Terminal Device Assignment Note When changing the type of a port for which one or more SDN buttons are set (except when changing between PC Console and Telephone), all SDN buttons customi...
Page 47 - [620] Incoming Call Distribution Group Member
2.1 PT Programming PT Programming Manual 47 [604] Extension Intercept Destination [605] Call Forwarding—No Answer Time [606] CLIP/COLP Number [620] Incoming Call Distribution Group Member [621] Incoming Call Distribution Group Delayed Ringing [622] Incoming Call Distribution Group Floating Extension...
Page 48 - [623] Incoming Call Distribution Group Name
2.1 PT Programming 48 PT Programming Manual [623] Incoming Call Distribution Group Name [624] Incoming Call Distribution Group Distribution Method [625] Destination for Overflow Time Expiration [626] Overflow Time [627] Destination When All Busy [623] Max. 20 characters Name END ENTER ENTER Incoming...
Page 49 - Number in Queuing
2.1 PT Programming PT Programming Manual 49 [628] Queuing Call Capacity [629] Queuing Hurry-up Level [630] Queuing Time Table [631] Sequences in Queuing Time Table [632] Maximum Number of Agents [628] 0–30 Number in Queuing END ENTER ENTER Incoming Call Distribution Group No. 001–128 [629] None/1–30...
Page 50 - [640] Extension User Groups of a Paging Group
2.1 PT Programming 50 PT Programming Manual [640] Extension User Groups of a Paging Group [641] External Pagers of a Paging Group [650] Extension User Groups of a Pickup Group [660] VM Group Floating Extension Number [680] Idle Extension Hunting Type [640] Extn. User Group No. Paging Group No. END N...
Page 51 - [681] Idle Extension Hunting Group Member
2.1 PT Programming PT Programming Manual 51 [681] Idle Extension Hunting Group Member [690] PS Registration Notes • Extension numbers of PSs can be a maximum of 4 digits. • Please refer to the Installation Manual for details about PS registration. KX-TDA30:Registering DECT PS → 2.7.7 Connecting a Ce...
Page 52 - PIN for PS Registration
2.1 PT Programming 52 PT Programming Manual [692] Personal Identification Number (PIN) for PS Registration [699] CS Status Reference [692] 4 digits PIN for PS Registration END ENTER ENTER 1234 [699] END Slot No. Reference only CS Status ENTER Port No.
Page 53 - [700] External Pager Floating Extension Number
2.1 PT Programming PT Programming Manual 53 2.1.10 Resource/Interface Programming [700] External Pager Floating Extension Number [KX-TDA100/KX-TDA200/KX-TDA600] [KX-TDA30] [710] Music Source Selection for BGM (with the KX-TDA30)/BGM2 (with the KX-TDA100/KX-TDA200/KX-TDA600) [711] Music on Hold [712]...
Page 57 - [812] ISDN Remote Floating Extension Number; Skip Perforation
2.1 PT Programming PT Programming Manual 57 [803] SMDR Skip Perforation [804] SMDR Outgoing Call Printing [805] SMDR Incoming Call Printing [810] Remote Programming [811] Modem Floating Extension Number [812] ISDN Remote Floating Extension Number [803] END 0–95 lines Skip Perforation ENTER ENTER [80...
Page 58 - Card Name; Reset
2.1 PT Programming 58 PT Programming Manual 2.1.12 Card Programming [900] Slot Card Type Reference [901] Slot Card Deletion [902] Slot Card Reset [910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only) [911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only) [900] Refe...
Page 60 - Revision History; KX-TDA600 PLMPR Software File Version 3.1xxx; Changed Contents
3.1 Revision History 60 PT Programming Manual 3.1 Revision History 3.1.1 KX-TDA600 PLMPR Software File Version 3.1xxx Changed Contents • [007] DSS Console Paired Telephone • [601] Terminal Device Assignment
Page 62 - KX-TDA30 PSMPR Software File Version 4.0xxx
3.1 Revision History 62 PT Programming Manual 3.1.3 KX-TDA30 PSMPR Software File Version 4.0xxx Changed Contents • 2.1.1 Programming Instructions • 2.1.2 Maximum Values Extension Numbers (Including Feature Numbers)
Page 63 - Feature Programming References; Absent Message; Call Charge Services
3.2 Feature Programming References PT Programming Manual 63 3.2 Feature Programming References A Absent Message • [008] Absent Message Feature Guide Reference 1.19.2 Absent Message Account Code Entry • [508] Account Code Mode Feature Guide Reference 1.5.4.3 Account Code Entry Automatic Route Selecti...
Page 65 - Dial Type Selection
3.2 Feature Programming References PT Programming Manual 65 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP) Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG • [003] Extension Number • [00...
Page 67 - Extension Personal Identification Number (PIN)
3.2 Feature Programming References PT Programming Manual 67 Feature Guide Reference 1.9.3 Extension Dial Lock Extension Personal Identification Number (PIN) • [005] Extension Personal Identification Number (PIN) Feature Guide Reference 1.28.1 Extension Personal Identification Number (PIN) Extension ...
Page 68 - Group Call Distribution; Hot Line; Idle Extension Hunting; Incoming Call Distribution Group Features
3.2 Feature Programming References 68 PT Programming Manual G Group Call Distribution • [621] Incoming Call Distribution Group Delayed Ringing • [624] Incoming Call Distribution Group Distribution Method • [632] Maximum Number of Agents Feature Guide Reference 1.2.2.2 Group Call Distribution H Host ...
Page 70 - Manager Features
3.2 Feature Programming References 70 PT Programming Manual M Manager Features • [112] Manager Password • [511] Manager Assignment Feature Guide Reference 2.2.6 Manager Features Multiple Subscriber Number (MSN) Ringing Service • [421] BRI DIL/DDI/MSN Selection • [426] BRI Configuration Feature Guide...
Page 71 - Overflow Feature; Paging; Parallelled Telephone
3.2 Feature Programming References PT Programming Manual 71 • [624] Incoming Call Distribution Group Distribution Method • [629] Queuing Hurry-up Level Feature Guide Reference 1.2.2.3 Outside Destinations in Incoming Call Distribution Group Overflow Feature • [625] Destination for Overflow Time Expi...
Page 73 - Software Upgrading; Special Carrier Access Code; Speed Dialling—Personal/System; Tenant Service; TIE Line Service
3.2 Feature Programming References PT Programming Manual 73 S Software Upgrading • [190] Main Processing (MPR) Software Version Reference Feature Guide Reference 2.3.8 Software Upgrading Special Carrier Access Code • [303] Special Carrier Access Code Feature Guide Reference 1.5.4.9 Special Carrier A...
Page 74 - Time Service; Trunk Busy Out
3.2 Feature Programming References 74 PT Programming Manual Feature Guide Reference 1.30.1 TIE Line Service Time Service • [101] Time Service Switching Mode • [102] Time Service Starting Time • [514] Time Service Manual Switching Feature Guide Reference 2.2.4 Time Service Toll Restriction (TRS)/Call...
Page 75 - Verification Code Entry
3.2 Feature Programming References PT Programming Manual 75 V Verification Code Entry • [120] Verification Code • [121] Verification Code Name • [122] Verification Code Personal Identification Number (PIN) • [123] Verification Code COS Number Feature Guide Reference 1.9.6 Verification Code Entry Vir...
