Page 2 - Introduction; About this Programming Manual; Section 2, PT Programming; References Found in the PT Programming Manual; PT Programming Manual References; Links to Other Pages and Manuals; WARNING
2 PT Programming Manual Introduction About this Programming Manual The PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display. The PT Programming Manual is divided into the following sections: Sec...
Page 3 - NOTES
PT Programming Manual 3 NOTES • The contents of this manual apply to PBXs with a cer tain software version, as indicated on the cover of this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) Software Version Reference . • Some optional service cards, PTs, and feat...
Page 4 - Table of Contents
4 PT Programming Manual Table of Contents 1 Overview.................................................................................................. 9 1.1 Introduction .................................................................................................................... 10 1.1.1 Intr...
Page 9 - Section
PT Programming Manual 9 Section 1 Overview This section provides an overview of programming the PBX.
Page 10 - Ways to Programme
1.1 Introduction 10 PT Programming Manual 1.1 Introduction 1.1.1 Introduction These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your...
Page 11 - Password Security
1.1 Introduction PT Programming Manual 11 1.1.2 Password Security To maintain system security, system passwords are required to access certain programming functions of the PBX. By giving different users access to different passwords, it is possible to control the amount of programming that each user...
Page 12 - Entering Characters
1.1 Introduction 12 PT Programming Manual 1.1.3 Entering Characters The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available by pushing each button a specific number of times. Table 1 (Standard mode) Ta...
Page 16 - PT Programming; Programming Instructions; Required Telephone/Extension; Buttons and Functions
2.1 PT Programming 16 PT Programming Manual 2.1 PT Programming 2.1.1 Programming Instructions Required Telephone/Extension PBX settings can be customised through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the...
Page 17 - Entering System Programming Mode; System Password for Administrator; —for PT Programming; System Password for User
2.1 PT Programming PT Programming Manual 17 Entering System Programming Mode Using a PT to perform system programming allows an authorised extension user to set a wide range of PBX features and parameters.There are two levels of system programming that can be performed with a PT: administrator-level...
Page 19 - Entry Values; Slot and Port Values; Available Slot Entry Values
2.1 PT Programming PT Programming Manual 19 2.1.2 Entry Values Throughout this manual, maximum entry values are shown for each programming item, as shown in the example below. Slot and Port Values Available Slot Entry Values Enter slot numbers as two-digit numbers (e.g. "04" for slot 4). Ava...
Page 20 - Basic Programming; Name
2.1 PT Programming 20 PT Programming Manual 2.1.3 Basic Programming [000] Date & Time [In 12-hour Format] [In 24-hour Format] [001] System Speed Dialling Number [002] System Speed Dialling Name [003] Extension Number [000] 00–99 Year 01–31 Date 01–12 Hour 00–59 Minute END (HOLD) ENTER ENTER ENTE...
Page 21 - PIN
2.1 PT Programming PT Programming Manual 21 Note • If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose extension number is to be programmed/modified, quit the application first. [004] Extension Name [005] Extension Personal Identification Number (PIN) WAR...
Page 22 - Message; Charge Rate
2.1 PT Programming 22 PT Programming Manual [008] Absent Message [010] Charge Margin [011] Charge Tax [012] Charge Rate per Unit [008] 1–8 Location No. END Message ENTER ENTER Max. 16 characters [010] 2+2 decimal places Margin XX.YY% END ENTER ENTER [011] 01–03 Location No. 2+2 decimal places Tax XX...
Page 23 - System Management Programming
2.1 PT Programming PT Programming Manual 23 2.1.4 System Management Programming [100] Flexible Numbering [101] Time Service Switching Mode [102] Time Service Starting Time [In 12-hour Format] [In 24-hour Format] [100] 01–68 Location No. Feature No. END (HOLD) ENTER ENTER CANCEL NEXT To the Next Loca...
Page 24 - [110] System Password for Administrator—for PT Programming
2.1 PT Programming 24 PT Programming Manual [103] Idle Line Access (Local Access) [110] System Password for Administrator—for PT Programming [111] System Password for User—for PT Programming [112] Manager Password [120] Verification Code [121] Verification Code Name [122] Verification Code Personal ...
Page 25 - [130] Decimal Point Position for Currency; Currency
2.1 PT Programming PT Programming Manual 25 WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX....
Page 26 - Timer Programming
2.1 PT Programming 26 PT Programming Manual 2.1.5 Timer Programming [200] Hold Recall Time [201] Transfer Recall Time [203] Intercept Time [204] Hot Line Waiting Time [205] Automatic Redial Repeat Times [206] Automatic Redial Interval [207] Door Unlock Time [200] 0–240 s Time END (HOLD) ENTER ENTER ...
Page 27 - [208] Call Duration Count Starting Time for LCOT; Time
2.1 PT Programming PT Programming Manual 27 [208] Call Duration Count Starting Time for LCOT [209] DISA Delayed Answer Time [210] DISA Trunk-to-Trunk Call Prolong Time [211] DISA Intercept Time [208] 0–60 s Time END ENTER ENTER [209] 0–30 s Time END ENTER ENTER [210] 0–7 min Time END ENTER ENTER [21...
Page 28 - Denied Code; Exception Code
2.1 PT Programming 28 PT Programming Manual 2.1.6 TRS/Barring/ARS Programming [300] TRS/Barring Override by System Speed Dialling [301] TRS/Barring Denied Code [302] TRS/Barring Exception Code [303] Special Carrier Access Code [304] Emergency Number [320] ARS Mode [300] Disable/Enable END (HOLD) SEL...
Page 29 - Priority
2.1 PT Programming PT Programming Manual 29 [321] ARS Leading Number [322] ARS Routing Plan Table Number [325] ARS Exception Number [330] ARS Routing Plan Time Table [In 12-hour Format] [In 24-hour Format] [331–346] ARS Routing Plan Table (1–16) [321] 0001–1000 Location No. Max. 16 digits Leading No...
Page 30 - [352] ARS Removed Number of Digits for Carrier Access; Digits to Remove
2.1 PT Programming 30 PT Programming Manual [350] ARS Carrier Name [351] ARS Trunk Group for Carrier Access [352] ARS Removed Number of Digits for Carrier Access [353] ARS Carrier Access Code [350] 01–10 Carrier Table No. Max. 20 characters Name END ENTER ENTER SELECT [351] Carrier Table No. Trunk G...
Page 31 - Trunk Programming
2.1 PT Programming PT Programming Manual 31 2.1.7 Trunk Programming [400] LCOT/BRI Trunk Connection [401] LCOT/BRI Trunk Name [402] LCOT/BRI Trunk Group Number [409] LCOT/BRI Trunk Number Reference [410] LCOT Dialling Mode [411] LCOT Pulse Rate ENTER ENTER [400] No Connect/ Connect END (HOLD) SELECT...
Page 32 - [413] LCOT CPC Signal Detection Time—Outgoing
2.1 PT Programming 32 PT Programming Manual [412] LCOT DTMF Minimum Duration [413] LCOT CPC Signal Detection Time—Outgoing [414] LCOT CPC Signal Detection Time—Incoming [415] LCOT Reverse Circuit [416] LCOT Pause Time [417] LCOT Flash/Recall Time [418] LCOT Disconnect Time [412] 80/160 ms END SELECT...
Page 33 - Network Type
2.1 PT Programming PT Programming Manual 33 [420] BRI Network Type [421] BRI DIL/DDI/MSN Selection [422] BRI Subscriber Number [424] BRI Layer 1 Active Mode Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [425] BRI Layer 2 Active Mode Note After changing th...
Page 34 - TEI
2.1 PT Programming 34 PT Programming Manual [427] BRI TEI Mode Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [450] DIL 1:1 Destination [451] DID Number [452] DID Name [453] DID Destination [471] Host PBX Access Code ENTER ENTER [427] Slot No. Port No. 00–...
Page 36 - COS Programming; Level
2.1 PT Programming 36 PT Programming Manual 2.1.8 COS Programming [500] Trunk Group Number [501] TRS/Barring Level [502] Trunk Call Duration Limitation [503] Call Transfer to Trunk [504] Call Forwarding to Trunk [500] 1 Day/2 Lunch/3 Break/4 Night 01–64 COS No. Time No. Trunk Group No. Disable/Enabl...
Page 38 - [515] Wireless XDP Parallel Mode for Paired Telephone
2.1 PT Programming 38 PT Programming Manual [512] Permission for Door Open Access [514] Time Service Manual Switching [515] Wireless XDP Parallel Mode for Paired Telephone [516] Programming Mode Limitation Disable/ Enable SELECT [512] 01–64 COS No. END ENTER ENTER [514] 01–64 COS No. END Disable/ En...
Page 39 - Extension Programming
2.1 PT Programming PT Programming Manual 39 2.1.9 Extension Programming [600] EXtra Device Port (XDP) Mode [601] Terminal Device Assignment [602] Class of Service [603] Extension User Group [604] Extension Intercept Destination [605] Call Forwarding—No Answer Time [600] Slot No. Port No. Off/On END ...
Page 40 - [620] Incoming Call Distribution Group Member
2.1 PT Programming 40 PT Programming Manual [606] CLIP/COLP Number [620] Incoming Call Distribution Group Member [621] Incoming Call Distribution Group Delayed Ringing [622] Incoming Call Distribution Group Floating Extension Number [623] Incoming Call Distribution Group Name [606] Max. 16 digits 1–...
Page 41 - [624] Incoming Call Distribution Group Distribution Method; Overflow Time
2.1 PT Programming PT Programming Manual 41 [624] Incoming Call Distribution Group Distribution Method [625] Destination for Overflow Time Expiration [626] Overflow Time [627] Destination When All Busy [628] Queuing Call Capacity [624] END Ring/UCD/ Priority Hunt SELECT ENTER ENTER Incoming Call Dis...
Page 42 - [640] Extension User Groups of a Paging Group; Number of Agents
2.1 PT Programming 42 PT Programming Manual [629] Queuing Hurry-up Level [630] Queuing Time Table [631] Sequences in Queuing Time Table [632] Maximum Number of Agents [640] Extension User Groups of a Paging Group [629] None/1–30 Hurry-up Level END ENTER ENTER Incoming Call Distribution Group No. 001...
Page 43 - [650] Extension User Groups of a Pickup Group
2.1 PT Programming PT Programming Manual 43 [641] External Pagers of a Paging Group [650] Extension User Groups of a Pickup Group [660] VM Group Floating Extension Number [680] Idle Extension Hunting Type [681] Idle Extension Hunting Group Member [641] External Pager No. Paging Group No. END SELECT ...
Page 44 - PIN for PS Registration
2.1 PT Programming 44 PT Programming Manual [690] PS Registration Note • Please refer to Section 2.7.7 Connecting a Cell Station to the Hybrid IP-PBX in the Installation Manual for details about PS registration. [691] PS Termination [692] Personal Identification Number (PIN) for PS Registration [699...
Page 45 - [700] External Pager Floating Extension Number
2.1 PT Programming PT Programming Manual 45 2.1.10 Resource/Interface Programming [700] External Pager Floating Extension Number [710] Music Source Selection for BGM [711] Music on Hold [712] Music for Transfer [720] Doorphone Call Destination [729] Doorphone Number Reference [700] 1 Pager No. END (...
Page 48 - [812] ISDN Remote Floating Extension Number; Skip Perforation
2.1 PT Programming 48 PT Programming Manual [803] SMDR Skip Perforation [804] SMDR Outgoing Call Printing [805] SMDR Incoming Call Printing [810] Remote Programming [812] ISDN Remote Floating Extension Number [803] END 0–95 lines Skip Perforation ENTER ENTER [804] END No print/Print SELECT ENTER ENT...
Page 49 - Card Name; Reset
2.1 PT Programming PT Programming Manual 49 2.1.12 Card Programming [900] Slot Card Type Reference [901] Slot Card Deletion [902] Slot Card Reset [900] Reference only 01–11 Slot No. Card Name END (HOLD) ENTER [901] END ENTER Slot No. Delete ENTER To the Next Slot No. To the Desired Slot No. NEXT Con...
Page 52 - Revision History; KX-TDA15 PSMPR Software File Version 4.0xxx; Changed Contents
3.1 Revision History 52 PT Programming Manual 3.1 Revision History 3.1.1 KX-TDA15 PSMPR Software File Version 4.0xxx Changed Contents • [003] Extension Number • [004] Extension Name • [005] Extension Personal Identification Number (PIN) • [006] Operator Assignment • [007] DSS Console Paired Telephon...
Page 53 - Feature Programming References; Absent Message; Call Charge Services
3.2 Feature Programming References PT Programming Manual 53 3.2 Feature Programming References A Absent Message • [008] Absent Message Feature Guide Reference 1.17.2 Absent Message Account Code Entry • [508] Account Code Mode Feature Guide Reference 1.5.4.3 Account Code Entry Automatic Route Selecti...
Page 55 - Dial Type Selection
3.2 Feature Programming References PT Programming Manual 55 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG • [003] Extension Number • [004] Extension Name Feature Guide Reference 1.26.4.2 Calling/Connected Lin...
Page 57 - Extension Personal Identification Number (PIN); Group Call Distribution
3.2 Feature Programming References PT Programming Manual 57 1.8.3 Extension Dial Lock Extension Personal Identification Number (PIN) • [005] Extension Personal Identification Number (PIN) Feature Guide Reference 1.24.1 Extension Personal Identification Number (PIN) Extension Port Configuration • [00...
Page 58 - Hot Line; Idle Extension Hunting; Incoming Call Distribution Group Features; Integrated Services Digital Network (ISDN)
3.2 Feature Programming References 58 PT Programming Manual • [632] Maximum Number of Agents Feature Guide Reference 1.2.2.2 Group Call Distribution H Host PBX Access Code (Access Code to the Telephone Company from a Host PBX) • [471] Host PBX Access Code Feature Guide Reference 1.5.4.7 Host PBX Acc...
Page 60 - Manager Features
3.2 Feature Programming References 60 PT Programming Manual M Manager Features • [112] Manager Password • [511] Manager Assignment Feature Guide Reference 2.2.6 Manager Features Multiple Subscriber Number (MSN) Ringing Service • [421] BRI DIL/DDI/MSN Selection • [426] BRI Configuration Feature Guide...
Page 61 - Overflow Feature; Paging; Parallelled Telephone
3.2 Feature Programming References PT Programming Manual 61 • [629] Queuing Hurry-up Level Feature Guide Reference 1.2.2.3 Outside Destinations in Incoming Call Distribution Group Overflow Feature • [625] Destination for Overflow Time Expiration • [626] Overflow Time • [627] Destination When All Bus...
Page 63 - Special Carrier Access Code
3.2 Feature Programming References PT Programming Manual 63 Feature Guide Reference 2.3.8 Software Upgrading Special Carrier Access Code • [303] Special Carrier Access Code Feature Guide Reference 1.5.4.8 Special Carrier Access Code Speed Dialling—Personal/System • [001] System Speed Dialling Number...
Page 64 - Time Service; Trunk Call Limitation
3.2 Feature Programming References 64 PT Programming Manual Time Service • [101] Time Service Switching Mode • [102] Time Service Starting Time • [514] Time Service Manual Switching Feature Guide Reference 2.2.4 Time Service Toll Restriction (TRS)/Call Barring (Barring) • [300] TRS/Barring Override ...
Page 65 - Virtual PS
3.2 Feature Programming References PT Programming Manual 65 1.8.6 Verification Code Entry Virtual PS • [690] PS Registration Feature Guide Reference 1.21.6 Virtual PS Voice Mail (VM) Group • [601] Terminal Device Assignment • [660] VM Group Floating Extension Number Feature Guide Reference 1.20.1 Vo...
