Page 2 - Introduction; About this Programming Manual; Section 2, PT Programming; References Found in the PT Programming Manual; PT Programming Manual References; Links to Other Pages and Manuals; WARNING
2 PT Programming Manual Introduction About this Programming Manual The PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display. The PT Programming Manual is divided into the following sections: Sec...
Page 3 - NOTES
PT Programming Manual 3 NOTES • The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) Software Version Reference . • Some optional service cards, PTs, and featu...
Page 4 - Table of Contents
4 PT Programming Manual Table of Contents 1 Overview.................................................................................................. 7 1.1 Introduction ...................................................................................................................... 8 1.1.1 Int...
Page 7 - Section
PT Programming Manual 7 Section 1 Overview This section provides an overview of programming the PBX.
Page 8 - Ways to Program; Password Security; Password
1.1 Introduction 8 PT Programming Manual 1.1 Introduction 1.1.1 Introduction These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customize the PBX to your ...
Page 9 - Entering Characters
1.1 Introduction PT Programming Manual 9 5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum protection against unauthorized access. For a list of numbers and characters that can be used in system passwords, refer to Section 1.1.3 Entering Characters. 6. If a...
Page 10 - Notes
1.1 Introduction 10 PT Programming Manual Table 2 (Option mode) [Example of Entering Characters] To enter "Ann": Notes • To erase the character on the cursor, press CLEAR. • To move the cursor to the left, press . • To move the cursor to the right, press . When entering two or more character...
Page 12 - PT Programming; Programming Instructions; Required Telephone/Extension; Buttons and Functions; Fixed Buttons
2.1 PT Programming 12 PT Programming Manual 2.1 PT Programming 2.1.1 Programming Instructions Required Telephone/Extension PBX settings can be customized through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the...
Page 13 - Entering System Programming Mode; System Password for Administrator; —for PT Programming; System Password for User
2.1 PT Programming PT Programming Manual 13 Entering System Programming Mode Using a PT to perform system programming allows an authorized extension user to set a wide range of PBX features and parameters.There are two levels of system programming that can be performed with a PT: administrator-level...
Page 14 - Maximum Values; Extension Numbers (Including Feature Numbers); Available Slot Entry Values
2.1 PT Programming 14 PT Programming Manual 2.1.2 Maximum Values Throughout this manual, maximum entry values are shown for each programming item. When maximum entry values for one or more of the supported PBX models differ, these differences are listed within the programming item, as shown in the e...
Page 15 - Available Port Entry Values
2.1 PT Programming PT Programming Manual 15 Enter slot numbers as two-digit numbers (e.g. "04" for slot 4). Available Port Entry Values Enter values as two-digit numbers (e.g. "04" for port 4). KX-TDA100/KX-TDA200/KX-TDA600 Slot and Port Values Available Slot Entry Values KX-TDA100/K...
Page 16 - Basic Programming; Card Type; Year; Name
2.1 PT Programming 16 PT Programming Manual Available Port Entry Values Enter values as two-digit numbers (e.g. "04" for port 4). 2.1.3 Basic Programming [000] Date & Time [001] System Speed Dialing Number [002] System Speed Dialing Name Card Type Port Number Related Programming DHLC8 01...
Page 17 - Selecting complex, random PINs that cannot be easily guessed.; PIN
2.1 PT Programming PT Programming Manual 17 [003] Extension Number Notes • Extensions that will have a mailbox using a VM in DPT integration must have extension numbers of 2–4 digits. • Extension numbers of PSs can be a maximum of 4 digits. • If PC Phone, PC Console, or a CTI application is running ...
Page 18 - Note; System Management Programming; Message
2.1 PT Programming 18 PT Programming Manual [007] DSS Console Paired Telephone Note This program is only available after the port connected to the DSS Console is assigned as "DSS Console" in [601] Terminal Device Assignment.Note that with MPR Software File Version 3.1000 or later, if one or ...
Page 19 - [110] System Password for Administrator—for PT Programming
2.1 PT Programming PT Programming Manual 19 [102] Time Service Starting Time [103] Idle Line Access (Local Access) [110] System Password for Administrator—for PT Programming [111] System Password for User—for PT Programming [112] Manager Password [102] 01:00–12:59 Hour:Minute END ENTER ENTER Day No....
Page 20 - Verification Code
2.1 PT Programming 20 PT Programming Manual [120] Verification Code [121] Verification Code Name [122] Verification Code Personal Identification Number (PIN) WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verifi...
Page 21 - Timer Programming; [208] Call Duration Count Starting Time for LCOT
2.1 PT Programming PT Programming Manual 21 2.1.5 Timer Programming [200] Hold Recall Time [201] Transfer Recall Time [203] Intercept Time [204] Hot Line Waiting Time [205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only) [207] Door Unlock Time [208] Call Duration Count Starting Ti...
Page 22 - [300] TRS Override by System Speed Dialing; Time; Exception Code
2.1 PT Programming 22 PT Programming Manual [209] DISA Delayed Answer Time [210] DISA CO-to-CO Line Call Prolong Time [211] DISA Intercept Time 2.1.6 TRS/ARS Programming [300] TRS Override by System Speed Dialing [301] TRS Denied Code [302] TRS Exception Code [209] 0–30 s 5 s Time END ENTER ENTER [2...
Page 23 - Carrier Access Code
2.1 PT Programming PT Programming Manual 23 [303] Special Carrier Access Code [304] Emergency Number [320] ARS Mode [321] ARS Leading Number [322] ARS Routing Plan Table Number [325] ARS Exception Number [303] Max. 16 digits Carrier Access Code KX-TDA50: 01–20KX-TDA100: 01–20KX-TDA200: 01–20KX-TDA60...
Page 24 - Priority
2.1 PT Programming 24 PT Programming Manual [330] ARS Routing Plan Time Table [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only) [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) [350] ARS Carrier Name [351] ARS Trunk Group for Carrier Access KX-TDA50: 01–16KX-TDA100: 01–...
Page 25 - [352] ARS Removed Number of Digits for Carrier Access; CO Line Programming; Digits to Remove
2.1 PT Programming PT Programming Manual 25 [352] ARS Removed Number of Digits for Carrier Access [353] ARS Carrier Access Code 2.1.7 CO Line Programming [400] LCOT CO Line Connection [401] LCOT CO Line Name [402] LCOT Trunk Group Number [352] Carrier Table No. 0–15 Digits to Remove END ENTER ENTER ...
Page 26 - [413] LCOT CPC Signal Detection Time—Outgoing
2.1 PT Programming 26 PT Programming Manual [409] LCOT CO Line Number Reference [410] LCOT Dialing Mode [411] LCOT Pulse Rate [412] LCOT DTMF Minimum Duration [413] LCOT CPC Signal Detection Time—Outgoing [414] LCOT CPC Signal Detection Time—Incoming [416] LCOT Pause Time [409] Reference only Slot N...
Page 28 - Host PBX Access Code
2.1 PT Programming 28 PT Programming Manual [470] Trunk Group Intercept Destination (not applicable for MPR Software File Version 3.1000 or later) [471] Host PBX Access Code [472] Extension-to-CO Line Call Duration [473] CO-to-CO Line Call Duration [475] DISA Silence Detection [470] Trunk Group No. ...
Page 29 - COS Programming; Level
2.1 PT Programming PT Programming Manual 29 [476] DISA Continuous Signal Detection [477] DISA Cyclic Signal Detection [490] Caller ID Signal Type 2.1.8 COS Programming [500] Trunk Group Number [501] TRS Level [476] Trunk Group No. No Detect/ Detect END SELECT ENTER ENTER KX-TDA50: 01–64KX-TDA100: 01...
Page 31 - [515] Wireless XDP Parallel Mode for Paired Telephone; TRS Level
2.1 PT Programming PT Programming Manual 31 [509] TRS Level for System Speed Dialing [510] TRS Level for Extension Dial Lock [511] Manager Assignment [512] Permission for Door Open Access [514] Time Service Manual Switching [515] Wireless XDP Parallel Mode for Paired Telephone [516] Programming Mode...
Page 32 - Extension Programming
2.1 PT Programming 32 PT Programming Manual 2.1.9 Extension Programming [600] EXtra Device Port (XDP) Mode [601] Terminal Device Assignment Note With MPR Software File Version 3.1000 or later, when changing the type of a port for which one or more SDN buttons are set (except when changing between PC...
Page 33 - [620] Incoming Call Distribution Group Member
2.1 PT Programming PT Programming Manual 33 [604] Extension Intercept Destination [605] Call Forwarding—No Answer Time [606] CLIP Number [620] Incoming Call Distribution Group Member [621] Incoming Call Distribution Group Delayed Ringing [622] Incoming Call Distribution Group Floating Extension Numb...
Page 34 - [623] Incoming Call Distribution Group Name
2.1 PT Programming 34 PT Programming Manual [623] Incoming Call Distribution Group Name [624] Incoming Call Distribution Group Distribution Method [625] Destination for Overflow Time Expiration [626] Overflow Time [627] Destination When All Busy [623] Max. 20 characters Name END ENTER ENTER Incoming...
Page 35 - Number in Queuing
2.1 PT Programming PT Programming Manual 35 [628] Queuing Call Capacity [629] Queuing Hurry-up Level [630] Queuing Time Table [631] Sequences in Queuing Time Table [632] Maximum Number of Agents [628] 0–30 Number in Queuing END ENTER ENTER Incoming Call Distribution Group No. 001–128 30 [629] None/1...
Page 36 - [640] Extension User Groups of a Paging Group
2.1 PT Programming 36 PT Programming Manual [640] Extension User Groups of a Paging Group [641] External Pagers of a Paging Group [650] Extension User Groups of a Pickup Group [660] VM Group Floating Extension Number [640] Extn. User Group No. Paging Group No. END No/Yes SELECT ENTER ENTER KX-TDA50:...
Page 37 - [681] Idle Extension Hunting Group Member
2.1 PT Programming PT Programming Manual 37 [680] Idle Extension Hunting Type [681] Idle Extension Hunting Group Member [690] PS Registration Notes • Extension numbers of PSs can be a maximum of 4 digits. • Please refer to the Installation Manual for details about PS registration. KX-TDA50: → 2.7.7 ...
Page 38 - [700] External Pager Floating Extension Number; PIN for PS Registration
2.1 PT Programming 38 PT Programming Manual [691] PS Termination [692] Personal Identification Number (PIN) for PS Registration [699] CS Status Reference 2.1.10 Resource/Interface Programming [700] External Pager Floating Extension Number [KX-TDA100/KX-TDA200/KX-TDA600] [KX-TDA50] [691] PS No. END E...
Page 41 - Location
2.1 PT Programming PT Programming Manual 41 [800] RS-232C Parameter—Word Length [800] RS-232C Parameter—Parity Bit [800] RS-232C Parameter—Stop Bit Length [801] External Modem Control [802] SMDR Page Length [803] SMDR Skip Perforation [804] SMDR Outgoing Call Printing [800] END 7/ 8 bits SELECT 3 Lo...
Page 42 - Card Name
2.1 PT Programming 42 PT Programming Manual [805] SMDR Incoming Call Printing [810] Remote Programming [811] Modem Floating Extension Number [812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.1.12 Card Programming [900] Slot Card Type Reference [901] Slot Card Deletio...
Page 43 - Reset
2.1 PT Programming PT Programming Manual 43 [902] Slot Card Reset [910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only) [911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only) [902] END Slot No. Reset ENTER ENTER Confirming the resetting operation. [910] END Slot No...
Page 46 - Feature Programming References; Absent Message; Feature Manual Reference; Feature Manual Reference; Feature Manual Reference; Call Hold; Feature Manual Reference; Call Pickup; Feature Manual Reference; Call Transfer
3.1 Feature Programming References 46 PT Programming Manual 3.1 Feature Programming References A Absent Message • [008] Absent Message Feature Manual Reference 1.1.1 Absent Message Account Code Entry • [508] Account Code Mode Feature Manual Reference 1.1.2 Account Code Entry ARS (Automatic Route Sel...
Page 48 - Dial Mode Selection
3.1 Feature Programming References 48 PT Programming Manual Feature Manual Reference 1.3.15 CO Line Call Limitation D Dial Mode Selection • [410] LCOT Dialing Mode • [411] LCOT Pulse Rate • [412] LCOT DTMF Minimum Duration Feature Manual Reference 1.4.2 Dial Mode Selection DID (Direct Inward Dialing...
Page 50 - Flexible Numbering/Fixed Numbering; Hot Line
3.1 Feature Programming References 50 PT Programming Manual F Flash/Recall/Terminate • [418] LCOT Disconnect Time Feature Manual Reference 1.6.2 Flash/Recall/Terminate Flexible Numbering/Fixed Numbering • [100] Flexible Numbering Feature Manual Reference 1.6.4 Flexible Numbering/Fixed Numbering Floa...
Page 51 - ICD Group Features; ICD Group Features—Group Call Distribution; ICD Group Features—Outside Destinations; ICD Group Features—Overflow
3.1 Feature Programming References PT Programming Manual 51 I ICD Group Features • [620] Incoming Call Distribution Group Member • [621] Incoming Call Distribution Group Delayed Ringing • [622] Incoming Call Distribution Group Floating Extension Number • [623] Incoming Call Distribution Group Name •...
Page 54 - Private Network Features; PS Connection
3.1 Feature Programming References 54 PT Programming Manual PC Console/PC Phone • [601] Terminal Device Assignment Feature Manual Reference 1.13.5 PC Console/PC Phone Private Network Features • [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only) • [500] Trunk Group Number Feature Manual Refer...
Page 55 - PS Ring Group
3.1 Feature Programming References PT Programming Manual 55 PS Ring Group • [620] Incoming Call Distribution Group Member Feature Manual Reference 1.13.27 PS Ring Group PT Programming • 2.1 PT Programming • [516] Programming Mode Limitation Feature Manual Reference 1.13.28 PT Programming R Redial, L...
Page 56 - Tenant Service; Time Service; Upgrading the Software; Verification Code Entry
3.1 Feature Programming References 56 PT Programming Manual T TAFAS (Trunk Answer From Any Station) • [700] External Pager Floating Extension Number Feature Manual Reference 1.17.2 TAFAS (Trunk Answer From Any Station) Tenant Service • [001] System Speed Dialing Number • [006] Operator Assignment • ...
Page 57 - Virtual PS
3.1 Feature Programming References PT Programming Manual 57 • [123] Verification Code COS Number Feature Manual Reference 1.19.1 Verification Code Entry Virtual PS • [690] PS Registration Feature Manual Reference 1.19.2 Virtual PS Voice Mail (VM) Group • [601] Terminal Device Assignment • [660] VM G...
Page 58 - One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,Carolina, Puerto Rico 00985 http://www.panasonic.com/csd Copyright: This mat...
