National Instruments NI USB-9239 - Manual
National Instruments NI USB-9239 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hot Surface; Safety Guidelines for Hazardous Voltages; or
- Page 3 – Caution; Related Documentation; DAQ Getting Started Guide; Start»All
- Page 4 – LabVIEW
- Page 5 – Measurement Studio; DAQ; ANSI C without NI Application Software; NI-DAQmx C Reference Help; .NET Languages without NI Application Software
- Page 6 – Device Documentation and Specifications; Note; Training Courses; Installing the Software
- Page 7 – Installing Other Software; for USB Devices Getting Started Guide; Start»All Programs»National Instruments»
- Page 8 – for more information.
- Page 9 – LED Indicator; LED State; Specifications; Accessory
- Page 10 – Wiring for High-Vibration Applications; Module
- Page 13 – Passband; Stopband
- Page 14 – Input Characteristics; Operating voltage ranges
- Page 15 – Input noise; Stability
- Page 16 – Input delay; Power Requirements
- Page 17 – Physical Characteristics; not; Safety Standards
- Page 18 – link in the Certification column.; Hazardous Locations; noncondensing; Electromagnetic Compatibility; EN 61326 EMC requirements Industrial Immunity
- Page 19 – CE Compliance; Environmental Management; NI and the; Waste Electrical and Electronic Equipment (WEEE); EU Customers; Calibration; ⬉ᄤֵᙃѻક∵ᵻࠊᄣ⧚ࡲ⊩ ˄Ё; RoHS
- Page 20 – Where to Go for Support; you have access to everything from
USER GUIDE AND SPECIFICATIONS
NI USB-9229/9239
4-Channel, 24-Bit Analog Voltage Input Module
This user guide describes how to use the National Instruments
USB-9229/9239 and lists the device specifications. In this document,
the NI USB-9229 and NI USB-9239 are referred to inclusively as the
NI USB-9229/9239.
Introduction
The NI USB-9229/9239 provides a USB interface for four channels of
24-bit simultaneous analog input with integrated signal conditioning. The
NI USB-9229/9239 consists of two components: an NI 9229/9239 module
and an NI USB-9162 carrier, as shown in Figure 1.
Figure 1.
NI USB-9229/9239 Components
NI 9229/9239
NI USB-9162
NI USB-9229/9239
Hi-SP
eed USB Carrie
r
NI U
SB-9162
Hi-Speed USB Carrie
r
NI U
SB-9162
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI USB-9229/9239 User Guide and Specifications 2 ni.com Dimensions Figure 2 shows the NI USB-9229/9239 device dimensions. Figure 2. NI USB-9229/9239 Device in Millimeters (Inches) Safety Guidelines Operate the NI USB-9229/9239 only as described in these operating instructions. Hot Surface This icon ...
© National Instruments Corporation 3 NI USB-9229/9239 User Guide and Specifications Caution Make sure that devices and circuits connected to the module are properly insulated from human contact. Caution When module terminals are hazardous voltage LIVE (>42.4V pk /60 VDC), you must ensure that dev...
NI USB-9229/9239 User Guide and Specifications 4 ni.com The NI-DAQmx Help contains general information about measurement concepts, key NI-DAQmx concepts, and common applications that are applicable to all programming environments. Select Start»All Programs»National Instruments»NI-DAQ»NI-DAQmx Help ....
