Page 5 - Notice
Notice This guide is released by Mitel Networks Corporation as a guide for certified service personnel. It provides information necessary to properly configure, maintain, and operate the product. The contents of this document reflect current company standards and are subject to revision or change wi...
Page 6 - Product Disposal Instructions
Product Disposal Instructions This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of with other commercial or household waste at the end of its working life. For appropriate disposal and recycling instructions, contact your local recy...
Page 7 - Contents
Contents Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 1 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Requirements and Conditions . . ....
Page 9 - Introduction; Requirements and Conditions
Introduction Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 3 Introduction The Mitel 5610 Cordless Handset and IP DECT (Digital Enhanced Cordless Telecommunications) Stand provide basic Mitel 5000 Communications Platform (CP) phone features on a cordl...
Page 10 - About the Handset Connection Status Indicators
About the Handset Connection Status Indicators Page 4 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 To determine if a handset call is being supported by the repeater by using the verification tone: 1. Enable the verification tone feature on the stand. (Re...
Page 11 - 610 Cordless Handset Feature Set
5610 Cordless Handset Feature Set Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 5 5610 Cordless Handset Feature Set This section lists the features available for the 5610 Cordless Handset and IP DECT Stand product. • Call and telephony features o Up ...
Page 12 - Related Documentation
Related Documentation Page 6 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 • Quality of service o Type of Service (ToS) • CODECs o G.711 (64 kbps, A-law & u-law) o G.729 • Interoperability o DECT interface (3081) or DECT 6.0 (3080) o WiFi friendly o M...
Page 13 - Registration and Configuration; Configure Dynamic Extension Express (Optional)
Registration and Configuration Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 7 Registration and Configuration After you have physically connected the IP DECT Stand to a Mitel IP Phone, you must program the handsets in the 5000 CP database and registe...
Page 14 - Register the Handsets with the IP DECT Stand
Register the Handsets with the IP DECT Stand Page 8 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Register the Handsets with the IP DECT Stand To register a handset with the IP DECT Stand (gateway), place the handset in the charging cradle. The first hand...
Page 15 - Configure all Handsets Using the Configurator Web Interface
Configure all Handsets Using the Configurator Web Interface Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 9 Configure all Handsets Using the Configurator Web Interface You access the IP DECT Stand Configurator web interface by entering the IP address...
Page 19 - Configure Handset from the Handset Display Menu
Configure Handset from the Handset Display Menu Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 13 15. In the left frame of the Configurator web interface, click Time Settings , and then do the following: • Enter the hostname of a Time Server on the in...
Page 21 - Change the Handset Display Name and PIN Code
Change the Handset Display Name and PIN Code Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 15 Change the Handset Display Name and PIN Code After configuring the handsets, change the default user name and the default PIN code to prevent unauthorized a...
Page 22 - IP DECT Stand Configuration Notes; Setup\Management Settings
IP DECT Stand Configuration Notes Page 16 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 IP DECT Stand Configuration Notes This section contains configuration notes for the IP DECT Stand Configurator web interface pages and setting. Operation\Home This web...
Page 23 - Setup\Pincode Settings; Destination for Incoming call
Setup\Pincode Settings Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 17 Setup\Pincode Settings You can set the PINs for accessing the IP DECT Stand (via the handset) and the external TFTP account settings. Setup\Telephony Settings You can map handset...
Page 24 - 610 Handset Configuration Notes; Call Log
5610 Handset Configuration Notes Page 18 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 5610 Handset Configuration Notes This section contains configuration notes for the handset display menu settings. The 5610 handset menu provides an interface to the IP ...
Page 25 - Network Configuration Notes; IP Configuration
Network Configuration Notes Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 19 Network Configuration Notes This section provides network configuration details. IP Configuration You can configure the 5610 Cordless Handset to obtain its IP address via DH...
Page 26 - DHCP
DHCP Page 20 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 DHCP The handsets can be provisioned with an IP address automatically by using DHCP. When configured, the DHCP option 66 returns an IP address or a DNS string of a TFTP server. The handsets use th...
Page 27 - SIP Configuration; SIP Server and SIP Accounts
SIP Configuration Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 21 SIP Configuration SIP Server and SIP Accounts The SIP server domain and proxy address can be configured from the handset menu: Settings – VoIP settings – Accounts. Up to eight differe...
Page 31 - PIN Protection of Handset Menus
PIN Protection of Handset Menus Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 25 Configuration file example: %SIP_STUN_ENABLE%:0 %SIP_RPORT_ENABLE%:1 %NETWORK_STUN_SERVER%:"stun01.sipphone.com" %SIP_STUN_BINDTIME_GUARD%:80 %SIP_STUN_BINDTIME_...
Page 32 - Registrations Administration
Registrations Administration Page 26 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Registrations Administration DECT registrations can be administered by assigning a specific handset to a specific handset ID. This feature is useful when configuration of e...
Page 33 - WEB Server Customization
WEB Server Customization Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 27 Figure 3. LOCAL_HTTP_SERVER_TEMPLATE_TITLE Parameter Controls the Headlines in the Configurator Web Interface LOCAL_HTTP_SERVER_TEMPLATE_TITLE
Page 34 - Automatic Daylight Saving Time (DST) Adjustment
Automatic Daylight Saving Time (DST) Adjustment Page 28 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Automatic Daylight Saving Time (DST) Adjustment DST handling can be handled manually or automatically. If manual configuration is chosen the user can cha...
Page 35 - Logs
Logs Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 29 Logs The gateway continuously logs information to an internal log buffer. This log can be viewed using the internal web server or the gateway can be configured to automatically upload the log file...
Page 36 - Server Based Configuration
Server Based Configuration Page 30 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Server Based Configuration A configuration file can be retrieved by the handset from a configuration server that is available on the Local Area Network (LAN), as shown in the...
Page 41 - Feature Support; 610 Handset and IP DECT Stand Features; IP DECT Stand LED Indicators
Feature Support Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 35 Feature Support This section provides additional information on feature support. 5610 Handset and IP DECT Stand Features The stand provides the following functionality: • Registers up t...
Page 42 - Handset Registration
Handset Registration Page 36 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Handset Registration The IP DECT Stand supports the configuration and registration of up to eight handsets. If the handset is configured on the stand, it will repeatedly try and re...
Page 43 - Do Not Disturb
Conference Split (End Conference) Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 37 Conference Split (End Conference) While in a conference, the End Conf softkey is presented. When selected, the user terminates the conference and it is split back into...
Page 44 - Maintenance; Firmware Updates; Download the Firmware
Maintenance Page 38 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Maintenance This section contains information on various types of maintenance that can be performed on the stand and handsets. Firmware Updates Firmware updates are provided via the Mitel O...
Page 45 - Schedule Automatic Firmware Updates
Schedule Automatic Firmware Updates Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 39 Schedule Automatic Firmware Updates 1. Log into the Mitel IP DECT Stand - Configurator web interface. 2. Click Management Settings . 3. Under Management Settings , s...
Page 46 - Firmware Update Error Codes
Firmware Update Error Codes Page 40 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Firmware Update Error Codes A number of errors can occur when initiating a firmware update or while a firmware update is in progress. The following list describes all error ...
Page 47 - Deregistering a Handset
Deregistering a Handset Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 41 Deregistering a Handset Use the following procedure to deregister a handset. To deregister a handset from an IP DECT Stand: 1. From Idle mode, press the OK key, select Settings ...
Page 48 - Troubleshooting
Troubleshooting Page 42 Mitel ® 5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Troubleshooting DECT registration fails on 2 nd handset : Ensure that gateway is opened for registration by pressing the RESET button. Power-cycling will not enable DECT registration du...
