Makita HS7101 - Manual
This repair manual covers Makita’s HS7100 and HS7101 circular saws, focusing on their mechanical and electrical maintenance. The guide details disassembly procedures for key components–such as the blade case, angular guide, depth adjustment mechanism, and handle cover–to perform lubrication, alignment adjustments (e.g., base-to-blade parallelism), and part replacements. It also includes wiring diagrams for both standard and electric-brake-equipped models, emphasizing proper component routing and regional wire-color compliance to ensure safe assembly and operation.
Table of Contents:
- Page 1 – Technical Specifications and Features of Circular Saws
- Page 2 – Maintenance Procedures and Lubrication Points
- Page 3 – Disassembly and Reassembly of Saw Base
- Page 4 – Adjusting Lock Lever and Guide Rule
- Page 5 – Disassembly of Depth Guide
- Page 6 – Assembly of Depth Guide
- Page 7 – Disassembly and Reassembly of Angular Guide
- Page 8 – Disassembly of Blade Case and Safety Covers
- Page 9 – Assembly of Blade Cover and Safety Components
- Page 10 – Disassembly of Internal Bearings
- Page 11 – Blade Angle Adjustment and Handle Cover Removal
- Page 12 – Base Alignment Procedure
- Page 13 – Circuit Diagram for HS6100 and HS7100 Models (No Brake/LED)
- Page 14 – Wiring Diagram for HS6100 and HS7100 Models (No Brake/LED)
- Page 15 – Circuit Diagram for HS6101 & HS7101 Models (With Brake/LED)
- Page 16 – Wiring Diagram for HS6101 & HS7101 Models (With Brake/LED)
Model No.
Description
PRODUCT
P 1/1
6
HS7100, HS7101
Circular Saw 190mm (7-1/2")
Models HS7100, HS7101 have been developed as the successor models of
the current model 5705R, featuring compact & lightweight design without
riving knife.
Other features are:
• New aesthetic design with black blade case and rear cover
• Electronic brake for quick blade stop (for HS7101 only)
• Twin LED job light for easy tracing of cutting line in the dark place
(for HS7101 only)
These models are also available with plastic carrying case as “K” models;
HS7100K, HS7101K.
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Max. Output (W)
220 - 240
6.4
50/60
1,400
1,400
640
2,200
110
13
50/60
680
1,750
Current (A)
Size of blade: mm (")
Diameter
Hole diameter
4.0 (8.8)
4.0 (8.9)
European countries: 4.0 (13.1), Australia, Brazil: 2.0 (6.6)
Other countries: 2.5 (8.2)
No load speed: rpm= min.
ˉ
¹
Max cutting capacity: mm (")
Weight according to
EPTA-Procedure 2003/01
*
1
: kg (lbs)
Power supply cord: m (ft)
0 degree
45 degrees
Double insulation
Protection against electric shock
50 degrees
TCT saw blade 190 ............. 1
Hex wrench ........................ 1
Guide rule (Rip fence) ....... 1
Dust nozzle
......................... 1
Guide rail adapter ............... 1 (for some countries only)
Saw blades
Guide rail 1400 set
Guide rail 1900 set
Guide rail 3000 set
Position seat sets
Rubber seat set
Seat set
Guide rail adapter
Bevel guide set
Guide rule (Rip fence)
Clamp set
Stopper
Specifications
Model No.
HS7100
HS7101
Electric brake
No
Yes
No
Yes (twin LED)
Job light
*1
: with TCT saw blade, Dust nozzle
190 (7-1/2)
30 (1-3/16)
5,500
67.0 (2-5/8)
48.5 (1-15/16)
43.5 (1-11/16)
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
246 (9-11/16)
310 (12-1/4)
258 (10-1/8)
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
S
tandard equipment
Note:
The standard equipment for the tools shown above may vary by country.
O
ptional accessories
T
ECHNICAL INFORMATION
H
L
W
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Makita
- Model
- HS7101
- Document type
- Manual
- Category
- Circular Saw
- Language(s)
- English
- Pages
- 16
- File size
- 12.3 MB
- Format
Other Manuals for Makita HS7101
Summary
Details on design improvements over the 5705R model, including compact build, electronic brake features, twin LED job lights, dimensional data, electrical ratings, cutting capacities, and accessories.
Instructions for disassembly and maintenance, specifying necessary tools, lubrication points, required grease types for components like the blade case, bearing box, and angular guide, with diagrams showing application locations.
Step-by-step instructions for removing and reassembling the saw base, including separating rear and front angular guide sections, shoulder pins, and other components, accompanied by labeled diagrams.
