KitchenAid KEBDS90020 - User Manual
KitchenAid KEBDS90020 Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Important instructions for safety
- Page 6 – Installation; The; Safeguarding the environment
- Page 7 – Troubleshooting guide
- Page 8 – authorised After-sales Service; Cleaning; WARNING
- Page 9 – Maintenance; LIGHTING SYSTEM; Do not touch the neon with bare hands after prolonged
- Page 10 – Material supplied; installed
- Page 11 – Installation - preliminary assembly instructions; : Before connecting the air outlet flexible tube, make; IMPORTANT; The air recycled through the carbon filters is sent
- Page 12 – Installation dimensions
- Page 13 – Installation - assembly instructions; hood and fix the brackets.
- Page 14 – Description and use of hood; CONTROL PANEL
- Page 15 – Additional information on operation; for more than 3
- Page 16 – Printed in Italy
Instructions for use
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 YOUR SAFETY AND THAT OF OTHERS ISHIGHLY IMPORTANT. This manual and the appliance itself provideimportant safety warnings, to be read andobserved at all times. This is the attention symbol, pertaining tosafety, which alerts users to potential risks tothemselves and others. All safety warnings are p...
6 After unpacking the appliance, check for anydamage caused during transport. In case ofproblems, contact the dealer or the After-SalesService. To avoid any damage, it is advisable to onlyremove the appliance from the polystyrene basejust before installation. PREPARATION FOR INSTALLATION this applia...
7 The hood does not work Make sure:• There is not a power failure.• A speed has actually been selected.• The front panel is correctly hooked.• The 9-pin connection is properly inserted. (Figure 1)• The red reset button on the electrical system box is pressed. (Figure 2)• In the 9-pin connection, mak...
