KitchenAid KEWPP90010 - Manuals

Page 4 - Important instructions for safety

4 YOUR SAFETY AND THAT OF OTHERS ISHIGHLY IMPORTANT. This manual and the appliance itself provideimportant safety warnings, to be read and observedat all times. This is the attention symbol, pertaining tosafety, which alerts users to potential risks tothemselves and others. All safety warnings are p...

Page 5 - Scrapping of household appliances; • This appliance is manufactured with recyclable or; KEEP THESE INSTRUCTIONS

5 Scrapping of household appliances • This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordancewith local waste disposal regulations. Beforedisposing of it, make it unusable by cutting off itspower supply cable. • For further information on the treatment, reco...

Page 6 - Safeguarding the environment

6 Disposal of packing The packing material is 100% recyclable and ismarked with the recycle symbol . The various parts of the packing must be disposed of responsiblyand in full compliance with local authorityregulations governing waste disposal. Disposal of the appliance - This appliance is marked i...

Page 7 - Troubleshooting guide; Service Centre; Cleaning

7 The appliance does not work: • Check the domestic power supply and ensure the appliance is connected to the mains properly. • Switch the hood off and then on again to see if the problem has been resolved. The hood is not extracting satisfactorily: • Check the extraction speed is set to the desired...

Page 8 - Maintenance; GREASE FILTERS; Fitting or changing the carbon filter

8 Maintenance - use safety gloves. - disconnect the appliance from the mains power supply. GREASE FILTERS The metal grease filter has an unlimited life and should be cleanedonce a month by hand or in a dishwasher at low temperature andwith a short cycle. Cleaning in a dishwasher may cause discolorin...

Page 9 - Extractor Version

9 Material supplied Remove all the components from the packets. Check that all the components are included. • Hood assembled with motor, lamps and grease filters installed. • Instructions for assembly and use • Telescopic flues • 1 Assembly template • 6 wall plugs Ø 8mm • 6 screws Ø 5x45 • 1 screw Ø...

Page 10 - Installation dimensions; Before starting the installation steps:; Installation - assembly instructions

10 Installation dimensions The instructions below, to be carried out in the order in which they are numbered, refer to the figures (withthe same step numbers) given on the last pages of this manual. Before starting the installation steps: - remove the perimeter extraction panel “ A ”; - push the lev...

Page 11 - IMPORTANT: Always make sure the panel is firmly fixed in place.

11 9. Fix the hood securely to the wall ( ABSOLUTELY NECESSARY!! ). 10. Connect a pipe (pipe and clamps are not provided, they must be purchased separately) for fumes exhaustto the connection ring located above the suction motor unit.The other end of the pipe must be connected to a device for expell...

Page 12 - Perimeter extraction panel.; Description and use of hood; - Disconnect the appliance from the power supply; Do not use products containing abrasives.

12 1. Control panel. 2. Grease filters (over the perimeter extraction panel). 3. Lamps. 4. Telescopic flue. 5. Perimeter extraction panel. Description and use of hood - Disconnect the appliance from the power supply Cleaning the perimeter extraction panel Removal: pull the handle (FRONT) firmly down...

Page 16 - Printed in Italy