KitchenAid KVUB406GSS - Installation Manual
This compatibility guide helps users pair KitchenAid gas or electric freestanding ranges with ventilation hoods, ensuring proper airflow and safety. The document organizes recommendations by range type–such as control system and size–and categorizes compatible hood models into under-cabinet, wall/island mount, downdraft, and pro-style systems. Key considerations include motor class CFM ratings to match ventilation capacity and installation requirements for optimal performance.
Table of Contents:
- Page 1 – Gas Range and Hood Pairing Guide
- Page 2 – Electric Range and Hood Compatibility
- Page 3 – Commercial Range and Ventilation Compatibility
- Page 4 – Gas Cooktop Ventilation Compatibility
- Page 5 – Electric Cooktop and Hood Compatibility Chart
UNDER CABINET HOODS
30” -
KVUB400GSS
36” -
KVUB406GSS
30” -
KVUB600DSS
36” -
KVUB606DSS
30” -
KXU2830JSS
36” -
KXU2836JSS
KFGG500E
KSGB900E
KFGD500E
YKSDB900ESS
KFDD500ESS
KSGG700E
KSDG950ESS
GAS FREESTANDING RANGES AND VENTILATION
PAIRING GUIDE
WALL MOUNT AND
ISLAND MOUNT HOODS
30” -
KVWB400DSS
36” -
KVWB406DSS
30” -
KVWB600HBS
36” -
KVWB606HBS
36” -
KVIB606DSS
PRO STYLE VENTILATION
AND LINERS
30” -
KVUC600JSS
36” -
KVUC606JSS
36” -
KVWC906JSS
48” -
KVWC908JSS
36” -
KVWC956JSS
48” -
KVWC958JSS
30” -
UVL5430JSS
36” -
UVL6036JSS*
48” -
UVL6048JSS*
30” REAR CONTROL
30” FRONT CONTROL
GAS FREESTANDING RANGES
* Custom hood liners can be used with any of the following blower motors:
UXB1200DYS (1,170 CFM), UXI1200DYS (1,200 CFM), UXB0600DYS (585 CFM)
** Motor Class CFM rating
Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the installer’s responsibility to comply with
installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located inside the range hood on the rear wall
of the range hood. Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The canopy range hood is factory
set for venting through the roof or through the wall. All openings in ceiling and wall where canopy range hood will be installed must be sealed.
IMPORTANT:
Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information.
Refer to installation instructions packaged with product before selecting cabinetry, making cutouts or beginning installation.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- KitchenAid
- Model
- KVUB406GSS
- Document type
- Installation Manual
- Category
- Range Hood
- Language(s)
- English
- Pages
- 5
- File size
- 484.8 KB
- Format
Other Manuals for KitchenAid KVUB406GSS
Summary
Compatibility guide for gas freestanding ranges and ventilation hoods, including models categorized by control type and size, along with motor class CFM ratings and installation requirements.
Compatibility guide for electric freestanding ranges and ventilation hoods, detailing compatible range and hood models using checkmarks and Xs, and noting custom liner and motor CFM information.
Compatibility information for commercial-style ranges/range tops with various hood and ventilation models, including under-cabinet, wall/island mount, downdraft, and pro-style options for specific range sizes (30", 36", 48").