KitchenAid KEBDS90020 - Manuals

Page 4 - Important instructions for safety

4 YOUR SAFETY AND THAT OF OTHERS ISHIGHLY IMPORTANT. This manual and the appliance itself provideimportant safety warnings, to be read andobserved at all times. This is the attention symbol, pertaining tosafety, which alerts users to potential risks tothemselves and others. All safety warnings are p...

Page 6 - Installation; The; Safeguarding the environment

6 After unpacking the appliance, check for anydamage caused during transport. In case ofproblems, contact the dealer or the After-SalesService. To avoid any damage, it is advisable to onlyremove the appliance from the polystyrene basejust before installation. PREPARATION FOR INSTALLATION this applia...

Page 7 - Troubleshooting guide

7 The hood does not work Make sure:• There is not a power failure.• A speed has actually been selected.• The front panel is correctly hooked.• The 9-pin connection is properly inserted. (Figure 1)• The red reset button on the electrical system box is pressed. (Figure 2)• In the 9-pin connection, mak...

Page 8 - authorised After-sales Service; Cleaning; WARNING

8 After-Sales Service Before calling the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the"Troubleshooting guide". 2. Switch the appliance off and back on again it to see if the fault persists. If after the above checks the fault ...

Page 9 - Maintenance; LIGHTING SYSTEM; Do not touch the neon with bare hands after prolonged

9 Maintenance • Use protective gloves.• Disconnect the appliance from the power supply. IMPORTANT: After carrying out hood or filter cleaning, refit the front panel and filters,checking correct installation and hooking, otherwise the hood will not switch on. GREASE FILTERIts purpose is to retain the...

Page 10 - Material supplied; installed

10 Material supplied Remove all the components from the packets. Check that all thecomponents are included. (Figure 8)• Hood assembled with extraction unit, neon and grease filters installed • 2 Carbon filters • Instructions for assembly and use• Metal box containing the electronic components.• 2 Br...

Page 11 - Installation - preliminary assembly instructions; : Before connecting the air outlet flexible tube, make; IMPORTANT; The air recycled through the carbon filters is sent

11 Installation - preliminary assembly instructions The hood is designed for installation and use in "Extractor Version" withextraction to the outside or in "Filter Version" with internalrecirculation. Install the hood away from very dirty areas, windows, doors and heatsources. IMPOR...

Page 12 - Installation dimensions

12 Installation dimensions The hood must be installed in a cabinet having the characteristics indicated in the figure. (Figure 12) IMPORTANT: The hood is designed and approved for use exclusively with KitchenAid gas, electric, vitroceramic, induction hobs.For gas hobs, the total max. power is 16.2 k...

Page 13 - Installation - assembly instructions; hood and fix the brackets.

13 Installation - assembly instructions The instructions given below in numerical order refer to the drawings in the "assembly instructions"manual, containing the respective numbering. 1. Make a 842x100 mm rectangular hole behind the hob, to enable insertion of the hood. IMPORTANT: Make sure...

Page 14 - Description and use of hood; CONTROL PANEL

14 Description and use of hood (Figure 13)1. Control panel2. Front panel3. Grease filters4. Carbon filters (Filter Version only)5. Lighting CONTROL PANEL (Figure 14) The hood has a "TOUCH" device for control of lights and speed.For correct use, carefully read the instructions below. • Button...

Page 15 - Additional information on operation; for more than 3

15 • Button T5: Opens (lifts) and closes (lowers) the extraction panel.With the hood off and panel closed, button T5 firstly opens the extraction panel and then sets the hood to extraction speed (power) 1.With the hood on (at any speed) and panel open, button T5 firstly switches the hood off (also s...

Page 16 - Printed in Italy