Jura 15357 - User Manual

5 Control elements 1 Rotary Switch 2 On/Off button Q (under cover) 3 Touchscreen display 1 23 4 Back of the machine 1 Service cover  (open by pressing with your finger) 2 Locking device 3 Sliding catch 4 Service socket with JURA Smart Connect Accessories Container for milk system cleaning 6 1 2 3

6 Important information Important information The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibil-ity for the ...

7 Important information U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JUR...

8 Important information U Do not put the GIGA or any individual parts in the dishwasher. U On models with glass cup grille: Do not sub-ject the glass cup grille to shock or impact. U Before cleaning, switch the GIGA off with the On/Off button Q . Always wipe the GIGA with a damp cloth rather than a ...

9 Important information U Keep children under the age of 8 away from the machine, or supervise them constantly. U Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil-dren must be able to recognise and under-stand the po...

10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your GIGA and on every as...

11 1 Preparing and using for the first time U Other symbols on the dashboard: U $ : Filter mode U h : ‘Smart mode’ is activated (see Chapter 4 ‘Permanent set- tings in programming mode – Smart mode’). U g : Your GIGA is connected to the Cool Control milk cooler (available as an optional accessory). ...

12 1 Preparing and using for the first time T   You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric...

14 1 Preparing and using for the first time T   Place a receptacle under the dual spout. ‘Machine is heating’‘Machine is rinsing’ , ‘Milk system is being rinsed’ . The rinse stops automatically. The start screen is displayed. Your GIGA is ready for use. Your GIGA creates fine, creamy, feather-light ...

15 1 Preparing and using for the first time T   Move your finger across the display until ‘Connect acces- sory’ is displayed in the centre. T   Touch ‘Connect accessory’ . ‘Connect accessory’ T   Now follow the instructions on the display to connect the accessory to the GIGA.

16 2 Preparation 2 Preparation Basic information about preparing drinks: U During the grinding operation you can change the coffee strength of single products. To do this, move your finger across the display or turn the Rotary Switch. U During preparation you can change the preset amounts (e.g. amou...

17 2 Preparation Preparation using the product selector view: Only some of the products you can prepare are shown on the start screen. As soon as you turn the Rotary Switch, more products are displayed in a prod- uct selector view. Turn the Rotary Switch or move your finger across the display to bri...

18 2 Preparation Your GIGA prepares latte macchiato, cappuccino, flat white and other speciality coffees with milk at the touch of a button. There is no need to move the glass or cup. Example:  Proceed as follows to prepare one latte macchiato. Precondition:  The start screen is displayed. Milk is c...

19 2 Preparation You can choose to use another coffee variety, for example decaffein-ated coffee, with the filter funnel for ground coffee. Basic information about ground coffee: U Never add more than two level measuring spoons of ground coffee. U Use ground coffee which is not ground too finely. Ve...

20 2 Preparation The GIGA allows you to prepare different variants of hot water: U ‘Hot water’ U ‘Hot water for green tea’ There is a danger of scalding from hot water splashes. T   Avoid direct contact with the skin. Example:  Proceed as follows to prepare hot water for green tea. Precondition:  Th...

21 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or ...

22 3 Daily operation To ensure that you get many years of reliable service out of your GIGA and to guarantee the optimum coffee quality, the machine requires daily maintenance. T   Pull out the drip tray. T   Empty the coffee grounds container and the drip tray. Rinse them both with warm water. E Al...

23 3 Daily operation U Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instruc-tions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’). U Traces of milk and coffee may stick to the top and bottom of the cup grille. I...

24 4 Permanent settings in programming mode 4 Permanent settings in programming mode Press the Rotary Switch to open the dashboard. In the ‘Machine set-ting’ f section, you will find a wide range of settings for your GIGA. Move your finger across the display or turn the Rotary Switch to navigate thr...

25 4 Permanent settings in programming mode Touch a product on the start screen for about 2 seconds to view the list of settings: U ‘Product settings’ : Specify individual settings such as coffee strength, amount of water, etc. U ‘Initials’ (or ‘Product name’ ): Change the initials (or the name) of ...

26 4 Permanent settings in programming mode Product Amount More settings ‘Latte macchiato’ Water: 25 ml – 240 mlMilk foam: 0 sec. – 120 sec.Milk: 0 sec. – 120 sec.Interval: 0 sec. – 60 sec. Coffee strength (10 levels), milk and milk foam temperature, temperature (low, normal, high), left and/or righ...

27 4 Permanent settings in programming mode T   Touch ‘Save’ . T   Touch ‘Back’ to return to the start screen. In the programme item ‘Set consistency of grind’ you can adjust both grinders separately to the degree of roast of your coffee. The consistency of grind is correct if the coffee flows regul...

28 4 Permanent settings in programming mode T   Touch ‘Switch off after’ . T   Now move your finger to the left or right to change the switch-off time. T   Touch ‘Save’ . ‘Switch off after’ T   Touch ‘Back’ the number of times needed to display the start screen again. You already set the time and da...

29 4 Permanent settings in programming mode Precondition:  The start screen is displayed. T   Press the Rotary Switch. T   Touch the ‘Machine setting’ f . ‘Switch off after’ T   Turn the Rotary Switch until ‘Water hardness’ is displayed. T   Touch ‘Water hardness’ . ‘Water hardness’ T   Now move you...

31 4 Permanent settings in programming mode T   Turn the Rotary Switch until ‘Save energy’ is displayed. T   Touch ‘Save energy’ . ‘Save energy’ T   Now move your finger across the controller and set it to ‘0’ . T   Touch ‘Save’ . ‘Save energy’ T   Touch ‘Back’ the number of times needed to display ...

32 4 Permanent settings in programming mode T   Now move your finger to the left or right to change the set- ting. T   Touch ‘Save’ . ‘Display’ T   Touch ‘Back’ the number of times needed to display the start screen again. In the programme item ‘Factory setting’ the machine can be reset to its facto...

33 4 Permanent settings in programming mode T   Now move your finger across the controller and set it to ‘0’ . T   Touch ‘Save’ . ‘Smart mode’ T   Touch ‘Back’ the number of times needed to display the start screen again. Define whether the product names or just the product images should be shown on...

34 4 Permanent settings in programming mode T   Touch ‘Product counter’ . ‘Product counter’ T   Touch ‘1/3’ or turn the Rotary Switch to view the number of other products. T   Touch ‘Back’ the number of times needed to display the start screen again.

35 5 Maintenance 5 Maintenance Basic information about maintenance: U Press the Rotary Switch to open the cockpit. This area consists of a ‘Maintenance status’ c section and a ‘Machine setting’ f section. You can manage the maintenance of your GIGA in the ‘Maintenance status’ c section. U If a maint...

36 5 Maintenance 15 minutes after milk preparation, the milk system is automatically rinsed. Therefore always place a receptacle under the dual spout after preparing milk. To ensure that the milk system in the dual spout always works prop-erly, you must clean it daily when you have been preparing mi...

37 5 Maintenance T   Place the container under the dual spout and connect the milk pipe with the container. T   Touch ‘Next’ . ‘Milk system is being cleaned’ The operation stops automatically. Your GIGA is once more ready for use. The dual spout must be dismantled and rinsed daily if milk has been p...

39 5 Maintenance T   Attach the bottom part of the milk system to the part already inserted from below. T   Fit the cover of the dual spout. It will click into place audibly. T   Connect the milk pipe to the dual spout. Your GIGA no longer has to be descaled if you are using the CLARIS Smart filter ...

40 5 Maintenance T   Fit the filter cartridge extension on top of a new CLARIS Smart filter cartridge. T   Insert the filter cartridge with its extension into the water tank. T   Close the filter holder. It will click into place audibly. T   Fill the water tank with fresh, cold water and reinsert th...

41 5 Maintenance T   Place a receptacle under the dual spout. T   Press the Rotary Switch. ‘Machine is being cleaned’ , water flows out of the dual spout. The operation is interrupted, ‘Add cleaning tablet’ . T   Open the cover of the filler funnel for ground coffee. T   Insert a JURA cleaning table...

42 5 Maintenance If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T   Clean up any splashes immediately. E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialised dealers. Precondition...

43 5 Maintenance T   Empty the receptacles and place them back under the dual spout and the hot-water spout. T   Remove the water tank and rinse it thoroughly. T   Fill the water tank with fresh, cold water and reinsert the tank. ‘Press the Rotary Switch’ T   Press the Rotary Switch. ‘Machine is bei...

44 5 Maintenance T   Turn the blue locking device inwards. T   Pull the red sliding catch completely forwards. T   Refit the service cover and fix it by pressing above the JURA logo. It will click into place audibly. T   Fill the bean container with coffee beans and close the aroma preservation cove...

45 6 Display messages 6 Display messages Messages on the start screen Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’). ‘Empty coffee grounds container’  / ‘Empty d...

46 6 Display messages Messages on the dashboard Message Cause/Result Action ‘Clean the milk system’ The GIGA prompts you to clean the milk system. T Perform milk system cleaning (see Chapter 5 ‘Maintenance – Cleaning the milk system’). ‘Change the filter’ The filter cartridge no longer works. The GI...

47 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout. The dual spout is dirty. T Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and r...

49 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your GIGA. It should be used to protect the machine during transport. In order to protect the GIGA from frost during transport, the system must be emptied. Precondition:  The...

50 9 Technical data 9 Technical data Voltage 220 – 240 V ~, 50 Hz Power 2300 W Conformity mark A Energy consumption ‘Save energy’  / ‘1’ approx. 8 Wh Energy consumption ‘Save energy’  / ‘0’ approx. 26 Wh Pump pressure static, max. 15 bar Holding capacity of water tank 2.6 l Holding capacity of bean ...

56 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenTel. +41 (0)62 38 98 233 E You will find additional contact details for your country at www.jura.com . E If you need assistance with using your...