Husqvarna 525iHE3 - User Manual

make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical h...

• Under no circumstances may the design of the product be modified without the permission of the manufacturer. Always use original accessories. Non- authorized modifications and/or accessories can result in serious personal injury or the death of the operator and others. • The vibration emission dur...

2. Remove the battery.3. Check that the hand guard is attached correctly.4. Examine the hand guard for damages. To do a check of the blades1. Stop the product.2. Remove the battery.3. Put on protective gloves.4. Make sure that the blades are not damaged or bent. Replace the blades if they are damage...

• Do not clean the battery or the battery charger with water. Strong detergent can cause damage to the plastic. • If you do not do maintenance, it decreases the life cycle of the product and increases the risk of accidents. • Special training is necessary for all servicing and repair work, especiall...

2. Put the battery in the battery charger. 3. Make sure that the green charging light on the battery charger comes on. That means that the battery is connected correctly to the battery charger. 4. When all LEDs on the battery come on, the battery is fully charged. 5. To disconnect the battery charge...

4. Fold the cutting unit to make it parallel to the shaft. Husqvarna Fleet Services ™ Husqvarna Fleet Services ™ is a cloud solution that gives the commercial fleet manager an overview of all products. Husqvarna Fleet Services ™ can be added to 525iHE3 and 525iHE4. For more information about Husqvar...

2. Put the T27 Torx key in the gearbox and turn clockwise and counterclockwise. Make sure that the blades move freely. 3. Examine the edges of the blades for damages and deformation. 4. Use a file to remove burrs on the blades.5. Install in the opposite sequence. Troubleshooting Blade Problem Possib...

Problem Possible faults Possible action Error LED is lit with red light The product needs servicing. Contact your servicing agent. Battery Problem Possible faults Possible solution Green LED flashes. Low battery voltage. Charge the battery. Red error LED flashes. The battery is empty. Charge the bat...

Technical data Technical data 525iHE3 525iHE4 Motor Motor type Husqvarna E-torq BLDC Husqvarna E-torq BLDC Weight Weight without battery, lbs/kg TBD 11.0/5.0 Weight with battery, lbs/kg TBD 14.1/6.4 Blades Type Double sided Double sided Cutting length, inch/mm TBD 23.6/600 Cutting speed, cuts/min TB...

Battery BLi200 40-B220X Weight, kg (lb) 1.3 (2.9) 1.4 (3.1) Approved battery chargers Battery charger QC330 Input voltage, V 100-240 Frequency, Hz 50-60 Power, W 330 Registered trademarks The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, inc. and any use of such m...

Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated extended reach Hedge Trimmer Brand Husqvarna Type/Model 525iHE3 and 525iHE4 Identification Seria...

UK Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated extended reach Hedge Trimmer Brand Husqvarna Type / Model 525iHE3 and 525iHE4 Identification Serial numbers dating from 20...