Human Touch WholeBody - Manual
Human Touch WholeBody – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
REMOVING THE CALF MASSAGER MOTOR
1. Partially recline the chair (Fig.1).
2. Power off the chair, then unplug it.
3. Pull up on the calf massager rotation release handle, then rotate the calf massager until the flat side is facing upward (Fig.2).
4. Using a paper clip, open the calf massager zipper (Fig.3).
5. Using a Phillips-head screwdriver, remove the four screws that secure the calf massager cover (Fig.4).
Tools Required:
Phillips-head screwdriver, paper clip, wire cutters or other instrument suitable for cutting zip-ties, new zip-ties
NOTE:
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
REPLACING CALF MASSAGER MOTOR
Oct 10, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 2
WholeBody
®
2.0
1
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
Release handle
Zipper
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
