Human Touch HT-5270 - Manual
Human Touch HT-5270 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
X1103
REPLACING THE POWER PANEL
H T -5270
06/01/08
Please send any questions or comments regarding these instructions to: [email protected]
© 2008 Human Touch™, LLC.
REMOVING THE POWER PANEL
1. Turn the power switch on the power panel to OFF and unplug the chair.
2. Using a Phillips-head screwdriver, remove the four screws.
3. Pull the power panel out of the backrest far enough to expose the connectors behind it (Fig.2).
4. Disconnect both sets of cables.
5. Remove the power panel from the chair.
6. Using a Phillips-head screwdriver, remove the two screws that secure the remote control to the
power panel, then remove the remote control from the power panel.
INSTALLING THE NEW POWER PANEL
1. Feed the remote control cable through the new power panel, then secure the remote control bracket to the
power panel using two screws.
2. Connect the remote control cable to the corresponding cable inside the mounting plate.
3. Connect the new power panel cable to the corresponding cable inside the mounting plate.
4. Install the power panel into the mounting plate.
CAUTION: Be sure to tuck the cables completely inside the mounting plate so that they do not get pinched.
5. Using the Phillips-head screwdriver, replace the four screws.
6. Plug in the chair and power it on, to ensure that the new power panel is working.
Tools Required: Phillips-head screwdriver.
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
Connector
(Fig.1)
(Fig.2)
Power panel
Remote
controller
connector
To ensure that Human Touch
®
products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
SERVICE LEVEL: 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
