Human Touch HT-2620 - Manual
Human Touch HT-2620 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
REPLACING THE MASSAGE MECHANISM
AND/OR PCB BOX
H T -2620
06/01/08
REMOVING THE MASSAGE MECHANISM AND/OR PCB BOX
1. Power off the chair and unplug it.
2. Press the backrest lever to release the backrest, then tip the backrest gently forward until it rests on the seat (Fig.1).
3. Open the backrest zippers, then flip the backrest cover forward (Fig.2).
4. Using a nail clipper, or other instrument suitable for cutting zip ties, cut the zip tie that secures
the PCB connector junction box covers (Fig.2).
5. Pull the PCB box and connector junction box out of the backrest, and rest them on top of the foam pad (Fig.3).
6. Remove the junction box cover, exposing the two connectors, then disconnect both connectors (Fig.4).
Tools Required: Nail clipper or other instrument suitable for cutting zip ties, one large zip tie, Phillips-head
screwdriver
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
1
Massage mechanism
PCB box
Fig.1
Fig.2
Backrest cover
Zip tie
Fig.3
PCB connector
junction box
PCB box
Fig.4
Connectors
Connectors
To ensure that Human Touch
®
products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
SERVICE LEVEL: 3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
