Honeywell TH8320ZW - Installation Manual

Honeywell TH8320ZW

Honeywell TH8320ZW – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 3 – Pair the thermostat to the project.; Note; : You will need access to the physical thermostat device.; To add the thermostat in the ClareHome app:; ClareHome app’s; Devices
  • Page 4 – Add Devices; Select the device category
  • Page 5 – Start Discovery Mode; Access the thermostat, and then press the; System; The face of the thermostat changes.
  • Page 6 – ClareHome App Guide
  • Page 7 – To remove the thermostat using ClareHome:; Tap the 3 dots next to the thermostat, and then tap; Remove; Read through the displayed information, and then tap; Start Removal Mode
  • Page 8 – Access the thermostat, and then press the
  • Page 9 – Pairing and removing the thermostat in FusionPro; To add the thermostat in FusionPro:; Locate the desired account in the list, and then click; View
  • Page 10 – tab, and then click
  • Page 15 – Contact information
Loading the manual

DOC ID -1040

• Rev 07

1 / 15

Honeywell TH8320ZW Thermostat
Integration Release Notes

Content

Preface...1

Introduction...1

Installing the Honeywell thermostat...3

Pairing and removing the thermostat in ClareHome...3

Pairing and removing the thermostat in FusionPro...9

Contact information...15

Last modified:

10/02/20

Preface

For information on Z-Wave and ClareHome, see

Installing Z-Wave with

ClareHome Tech Bulletin

(DOC ID 1162)

.

Notes

•

When installing Z-Wave devices, ensure that there is nothing inhibiting their

signal. Z-Wave relies on radio signals. Metal or thick walls may limit their
signal strength.

•

We recommend having 2 or more repeating Z-Wave devices.

Introduction

The Honeywell TH8320ZW is a Z-Wave thermostat that has been tested and
certified for integration with the ClareHome system.

By integrating the Honeywell thermostat to a ClareHome control system, your
customers can send commands to the thermostat to change the modes, cool and
heat settings, and the fan status from their mobile iOS devices or Android
smartphone.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Honeywell TH8320ZW

Summary

Page 3 - Pair the thermostat to the project.; Note; : You will need access to the physical thermostat device.; To add the thermostat in the ClareHome app:; ClareHome app’s; Devices

DOC ID -1040 • Rev 07 3 / 15 Installing the Honeywell thermostat A qualified installation technician should install the Honeywell thermostat. Refer to the documentation that came with the thermostat for detailed installation instructions. Pairing and removing the thermostat in ClareHome Pair the the...

Page 4 - Add Devices; Select the device category

DOC ID -1040 • Rev 07 4 / 15 3. Tap Add Devices . 4. Select the device category (Z-wave) . 5. Read through the displayed information, and then tap Add Z-Wave Device .

Page 5 - Start Discovery Mode; Access the thermostat, and then press the; System; The face of the thermostat changes.

DOC ID -1040 • Rev 07 5 / 15 6. Read the Z-Wave information, and then tap Start Discovery Mode . 7. Access the thermostat, and then press the System button. The face of the thermostat changes.

Other Honeywell Models