Hilti 3622326 Laser Level – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Table of Contents:
Page 3 – Original operating instructions
Page 5 – Information about the documentation; DANGER
Page 6 – Safety
Page 8 – Description; Product overview
Page 9 – Technical data
Page 10 – Operation
Page 12 – English; Setting up drywall track for a partition wall
Page 14 – Checking; Switch the tool on and unlock the pendulum.
Page 15 – Checking the leveling of the laser beam; The distance between the walls must be at least 10 m.
Page 16 – Checking the accuracy of the vertical line
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Page 5 - Information about the documentation; DANGER
English 1 1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the produ...
Page 6 - Safety
2 English Wireless data transfer Hilti Li-ion battery type series used. Observe the information given in the section headed In- tended use Pendulum locked (laser beam inclined) Pendulum unlocked (self-leveling system active) 1.4 Product information products are designed for professional users and on...
Page 8 - Description; Product overview
4 English 3 Description 3.1 Product overview @ Line mode button ; Liion battery = Warning sticker % Receiver mode button & Battery state of charge indicator ( Laser exit window ) Selector switch for ON / OFF and lock / unlock pendulum + Knob for fine adjustment Printed: 08.05.2019 | Doc-Nr: PUB...
Page 9 - Technical data
English 5 3.2 Intended use This tool is a self-leveling multi-line laser level that allows a single person to transfer right angles, level horizontally, carry out alignment work and plumb accurately. The product has three green 360° laser lines, a reference point directed downward on the right-hand ...
Page 10 - Operation
6 English Line thickness < 2.2 mm at 5 m (typical) (< 0.09 in at 16 ft (typical)) Laser class Class 2, visible, 510530 nm Operating status indicator Laser beams and the switch positions “Off”, “On locked” and “On unlocked” Power source Hilti B 12 Li-ion battery Battery life (all lines on) Hil...
Page 12 - English; Setting up drywall track for a partition wall
8 English 5.8.2 Setting up drywall track for a partition wall 5.8.3 Vertical alignment of pipes Printed: 08.05.2019 | Doc-Nr: PUB / 5492798 / 000 / 00
Page 14 - Checking; Switch the tool on and unlock the pendulum.
10 English 5.9 Checking 5.9.1 Checking the plumb point 1. In a high room (for example in a stairwell with a height of 10 m), make a mark (a cross) on the floor. 2. Place the tool on an even, level surface. 3. Switch the tool on and unlock the pendulum. 4. Position the tool so that the lower plumb be...
Page 15 - Checking the leveling of the laser beam; The distance between the walls must be at least 10 m.
English 11 9. Calculate the value R. ➥ The value R should be less than 3 mm (corre- sponds to 3 mm at 10 m). ➥ The value R should be less than 1/8". 5.9.2 Checking the leveling of the laser beam 1. The distance between the walls must be at least 10 m. 2. Place the tool on an even, level surface ...
Page 16 - Checking the accuracy of the vertical line
12 English 8. Calculate the value R. ➥ The value R should be less than 3 mm. ➥ The value R should be less than 1/8". 5.9.3 Checking perpendicularity (horizontal) 1. Position the tool so that the lower plumb beam coincides with the center of a reference cross marked in the middle of a room at a d...