Hilti 2181024 - Manuals

6 English 3 Description 3.1 Product overview 3.1.1 PR 30-HVSG A12 rotating laser @ Laser beam (plane of rotation) ; Rotary head = Sight % Grip & Battery release button ( Li­ion battery

English 7 ) Battery state-of-charge display + Control panel § Base plate with 5/8" thread 3.1.2 PR 30-HVSG A12 control panel @ Inclined plane mode button and LED ; Shock warning function button and LED = Speed of rotation button % LED for status “On/off” and “Auto-leveling” & On/off button (...

10 English Status Meaning The shock warning LED shows steady orange. • Shock warning mode is deactivated. The inclination LED shows steady orange • Inclined plane mode is active. The surveillance LED flashes orange. • The tool is aligning the laser plane with the (PRA 30G) reference point. The surve...

English 11 PR 30-HVSG A12 Protection class in accordance with IEC 60529 (except battery and battery compartment) IP66 Plumb beam Constant beam, perpendicular to the plane of rotation 4.2 Technical data for the laser receiver Indicator range, distance from zero ±52 mm (±2.0 in) Laser plane display ra...

English 13 1. Mount the rotating laser on a suitable holder or bracket. 2. Press the button. ◁ The auto-leveling LED flashes green. ◁ As soon as the tool has leveled itself, the laser beam switches on and begins to rotate and the "auto leveling" LED shows steadily. A wall bracket or tripod m...

English 15 1. Press the button on the rotating laser. ◁ The rotating laser levels itself and then projects a stationary downward-pointing laser beam. 2. Position the rotating laser so that the projected laser beam strikes reference point (A) exactly. Please note: The reference point is not a plumb p...

English 19 5. Bring the laser receiver into the desired position. The rotating laser automatically concentrates the beam along a shortened line in the area of the laser receiver. The width of the scan line can be adjusted using menu on the PRA 30G. The narrower the scan line is set, the brighter it ...

English 23 2. Then press the laser receiver into the rubber sleeve until the sleeve surrounds the laser receiver completely. 3. Fit the rubber sleeve onto the magnetic grip piece. 4. Press the button. 5. Unscrew the clamping knob on the grip piece slightly. 6. Mount the PRA 83 laser receiver on a te...

24 English 6.8 PRA 81 laser receiver with holder 1. Open the retainer on the PRA 81 and insert the laser receiver. 2. Close the retainer on the PRA 81. 3. Press the button. 4. Hold the laser receiver with the receiving window directly in the plane of the laser beam. 5. Position the laser receiver so...

26 English 7.4 Checking the main and transverse horizontal axes 1. Set up the tripod approx. 20 m (66ft) from a wall and level the tripod head with the spirit level. 2. Mount the device tool on the tripod and use the visual sighting method (front and rear sights) to aim the tool at the wall. 3. Fig....

English 29 Trouble or fault Possible cause Action to be taken Inclination warning. The laser receiver is outside the automatic inclination range. ▶ Set the inclination of the laser plane using the PRA 79 slope adapter. → page 17 Surveillance mode warning. The surveillance function is not possible or...

30 English Battery disposal Improper disposal of batteries can result in health hazards from leaking gases or fluids. ▶ DO NOT send batteries through the mail! ▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of...