Hilti 2227742 - Manuals

4 English 3 Description 3.1 Product overview @ Line mode button ; Li­ion battery = Warning sticker % Receiver mode button & Battery state of charge indicator ( Laser exit window ) Selector switch for ON / OFF and lock / unlock pendulum + Knob for fine adjustment Printed: 08.05.2019 | Doc-Nr: PUB...

English 5 3.2 Intended use This tool is a self-leveling multi-line laser level that allows a single person to transfer right angles, level horizontally, carry out alignment work and plumb accurately. The product has three green 360° laser lines, a reference point directed downward on the right-hand ...

6 English Line thickness < 2.2 mm at 5 m (typical) (< 0.09 in at 16 ft (typical)) Laser class Class 2, visible, 510­530 nm Operating status indicator Laser beams and the switch positions “Off”, “On locked” and “On unlocked” Power source Hilti B 12 Li-ion battery Battery life (all lines on) Hil...

8 English 5.8.2 Setting up drywall track for a partition wall 5.8.3 Vertical alignment of pipes Printed: 08.05.2019 | Doc-Nr: PUB / 5492798 / 000 / 00

10 English 5.9 Checking 5.9.1 Checking the plumb point 1. In a high room (for example in a stairwell with a height of 10 m), make a mark (a cross) on the floor. 2. Place the tool on an even, level surface. 3. Switch the tool on and unlock the pendulum. 4. Position the tool so that the lower plumb be...

English 11 9. Calculate the value R. ➥ The value R should be less than 3 mm (corre- sponds to 3 mm at 10 m). ➥ The value R should be less than 1/8". 5.9.2 Checking the leveling of the laser beam 1. The distance between the walls must be at least 10 m. 2. Place the tool on an even, level surface ...

12 English 8. Calculate the value R. ➥ The value R should be less than 3 mm. ➥ The value R should be less than 1/8". 5.9.3 Checking perpendicularity (horizontal) 1. Position the tool so that the lower plumb beam coincides with the center of a reference cross marked in the middle of a room at a d...