GE PP989DNBB - Manual

GE PP989DNBB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

Dimensions and Installation Information

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

Listed by

Underwriters

Laboratories

PP989DN

GE Profile

™

30" Downdraft Electric Cooktop

Specification Created 7/08

220977

Wall Installation:

Wall installations

require 25” countertop depth. When
cabinet is flush against the wall, the
fan housing can be rotated to the
horizontal position for direct venting

through rear wall. Make a countertop cutout in the range
cabinet according to unit dimensions and installation type.
Duct hole is positioned in back of cabinet for through-the-
wall ducting. Requires special offset adapter JXRW89.

Peninsula or Island Installation:

For peninsula/islands a

minimum 26” countertop depth is suggested. Blower should
be in vertical position. Island or peninsula cabinets may
require adjustment in cutout depth and/or location within
the width dimensions. Duct hole is positioned in bottom of
cabinet for island or peninsula installation.

Slab Installation:

For peninsula or island installation and

rear wall ducting,

6” PVC duct or locally approved piping

should be used if installing under a poured concrete slab.
Receptacle Location:

Install an approved junction box

within shaded area shown in diagram. Junction box must
be at least 10-1/2" below top of cabinet.

Installation Information:

Before installing, consult installation

instructions, packed with product, for current dimensional
data.

Note:

Electrical cable is not supplied with unit.

These cooktops are approved for indoor use only.

KW Rating

240V

9.1

208V

6.9

1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 6" minimum spacing to adjacent side wall is required

10-1/2

Cabinet Dimensions (in inches)

*Note: A 6" minimum spacing to adjacent side wall is required

Dimension and installation information are shown in inches.

⁄

(22

⁄

SS)

⁄

(30

SS)

⁄

SS)

⁄

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.