GE PP912KMCC - Manual

GE PP912KMCC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

Dimensions and Installation Information (in inches)

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

PP912TM/KM/BM

GE Profile

™

30" Built-In CleanDesign Electric Cooktop

220581

Listed by

Underwriters

Laboratories

†

Note:

Check local codes for required breaker size

Important:

Requires a 5" free area between the

bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
adjacent overhead cabinets. Units are furnished with a
48" flexible armored cable.

Note:

30" Ribbon cooktops are approved for use over select GE 27" and GE 30"

Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile

™

Telescopic Downdraft System,

consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be re-routed
to install downdraft. Consult cabinet and countertop manufacturer’s specs for
flush mount installation prior to install.

Before installing, consult installation

instructions packed with product for current dimensional data.

Filler Trim Kit:

When replacing an old GE 30" cooktop (with larger opening)

use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C (True
Bisque)

KW Rating

240V

7.6

208V

5.7

Breaker Size

240V

40 Amps

†

208V

30 Amps

†

3-1/4*

Cooktop

2-1/2**

Required

28-1/2

19-5/8

29-3/4

30_color_cktp_install.eps

21-3/8

Electrical junction box 16" MIN.

below countertop

30" MIN. to

unprotected

cabinet

Cut should

not interfere

with cabinet

structure

at front

1-1/2" MIN.

clearance to

side wall

from cut-out

1-1/2" MIN.

clearance to

side wall

from cut-out

1-3/4" to

rear wall

13" MAX.

depth

* Depth of unit at conduit connection location (rear) is

6-1/2" on models PP980/975/950/945 and 4-5/8"

on models PHP900/PP972/962/942/932/912,

JP655/356/346.

**Raised bull nose countertops may require up to

3/8" additional clearance to prevent interference

with curved front.

15" MIN.

to cabinet

Specification Revised 12/07

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.