GE PROSYS DEH40206 - User Manual

GE PROSYS DEH40206 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – assign network addresses to the devices and; LOCAL DATALINE INSTALLATION
Page 3 – DEH40206 Installation Instructions; you must have a; between all switches and the relay panel; The power supply in the relay panel must be on.; To test; DATALINE SWITCH INSTALLATION AND TESTING
Page 4 – As shown in; below, dataline switches are numbered; ProSys SWITCH DOCUMENTATION; form; Figure 2; Figure 4; Figure 1; SPARE; Figure 2; xx
Page 5 – Figure 3 – Softwiring a Dataline Switch
Page 6 – The individual switch buttons provide space for; Remove/Replace Screwless Wallplate; Record Switch Reference Numbers; DATALINE SWITCH DOCUMENTA-; form supplied with the relay panel. The completed form; Figure 4 – Dataline Switch Numbering
Page 7 – Figure 7; DATALINE SWITCH DOCUMENTATION; FULL
Page 8 – OFF/RESTORE — The Default Setting; Figure 8
Page 9 – Figures 9; and; Figure 9; GE Total Lighting Control

Loading the manual

DEH40206 Installation Instructions

DESCRIPTION

The ProSys Lighting Control System is a small network of
relay panels and occupant control switches linked by a 4-wire
dataline. Together, these devices form a reconfigurable
switching platform — one that uses “softwiring” instead of
hardwiring to link occupant switches to relays.

There are four basic configurations of SWS (or dataline
switches): the single-gang, 1-, 2- and 4-button RS1PS-x,
RS2PS-x and RS4PS-x, respectively, and the two-gang,
8-button RS8PS-x.

Each switch includes a bi-color LED status light for each control
button and a locator light. In addition, the 2-, 4- and 8-button
units have directories which accept standard

⁄

" wide (9mm)

labels. The x suffix in the catalog number refers to button and
switchplate color: 2 = ivory, 4 = almond, 7 = white and 9 = grey.

ProSys softwired switches are available with a key-

enabled override function. The switch will be disabled
except when a key is used to activate a 5 minute
override period. Dip switch 4 must be in the off position
to enable this feature as shown on page 8. Order this
feature by adding a -K to the part number for the 1- 2-,
4-, and 8-button switch. For example: RS2PSxK.

Any button on a Softwire Switch may be softwired to:
• Any relay or group of relays within a single relay panel
• A channel within a single relay panel
• The same channel among multiple panels (requires an

RCLK8PS Softwired Clock, which also operates as a
handheld programmer)

Before starting, read the following installation
instructions. If you have questions, call GE Total
Lighting Control Service at:

1-877-584-2685 (LTG-CNTL) in the USA and Canada.

RS1SWS-x

RS2SWS-x

RS8PS-x

RS4PS-x

ProSys Lighting Control System
Catalog Number RSxPS-x

GE Total Lighting Control

ProSys™ Softwired Switches, 1-, 2-, 4- and 8-button

These instructions do not cover all details or variations in equipment nor do they provide for every possible contingency that may be met in connection with
installation, operation or maintenance. Should further information be desired or should particular problems arise that are not covered for the purchaser's purposes,
the matter should be referred to the GE Company.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: GE
Model: PROSYS DEH40206
Document type: User Manual
Language(s): English
Pages: 10
File size: 360.3 KB
Format: PDF

Summary

Page 2 - assign network addresses to the devices and; LOCAL DATALINE INSTALLATION

2 DEH40206 Installation Instructions The dataline connects relay panels, softwired switches andoptional control modules. Within the 4-wire dataline are twotwisted pairs: the red and black wires, carrying data; and theblue and white wires, providing power to the dataline switches. For simplicity, we ...

Page 3 - DEH40206 Installation Instructions; you must have a; between all switches and the relay panel; The power supply in the relay panel must be on.; To test; DATALINE SWITCH INSTALLATION AND TESTING

3 DEH40206 Installation Instructions The 1-, 2- and 4-button dataline switches mount in standardsingle-gang switch boxes. The 8-button unit mounts in astandard 2-gang box. The dataline is typically connected in a“daisy-chain” from switch to switch, eliminating expensivehome runs. To assure proper op...

Page 4 - As shown in; below, dataline switches are numbered; ProSys SWITCH DOCUMENTATION; form; Figure 2; Figure 4; Figure 1; SPARE; Figure 2; xx

As shown in Figure 1 below, dataline switches are numbered sequentially beginning with 01-01 (Panel 01-Switch 01). Asingle switch unit may have 1, 2, 4 or 8 buttons. Switch unitsshould be identified on the reflected ceiling plan showing thenumber of buttons in each location. Check to confirm that th...