Electrolux ERI842DSD - User Manual

Page 2 - CONTENTS; CONGRATULATIONS; CONDITIONS OF USE

2 electrolux.com.au CONTENTS Important instructions ______________________________ 3 Before using your appliance _____________________ 3 Information on disposal for users ________________ 3 Important safety instructions ____________________ 3 Installation ___________________________________ 5 Descri...

Page 3 - BEFORE USING YOUR APPLIANCE; INFORMATION ON DISPOSAL; IMPORTANT INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS

3 BEFORE USING YOUR APPLIANCE Before you use the appliance, we recommend that you read through the relevant sections of this manual, which provides the description of your appliance and its functions.To avoid the risks that are always present when you use an appliance, it is important that the appli...

Page 5 - INSTALLATION

5 INSTALLATION WARNING This appliance should only be connected by a registered installer. • Always follow the installation instructions in the installation manual provided. • Check the appliance for transport damage. Do not connect a damaged appliance. • Faulty parts may only be replaced by original...

Page 6 - DESCRIPTION; CONTROLS

6 electrolux.com.au L Switch lighting on/off 1 Switch fan on/off + fan speed 1 2 Switch on fan speed 2/switch on carbon filter indicator 3 Switch on fan speed 3/reset grease filter indicator 4 Switch on intensive setting / switch on/off Hob to Hood remote control function F Filter indicator DESCRIPT...

Page 7 - USE; USING THE APPLIANCE

7 USE USING THE APPLIANCE Switching the fan on and off • Use the On/Off button to switch on the fan, then select the desired fan speed setting with the , or buttons. The LED indication on the buttons shows which setting has been selected. • Use the button to switch on the intensive setting. • The in...

Page 8 - MAINTENANCE; CLEANING; GREASE FILTERS

8 electrolux.com.au MAINTENANCE CLEANING WARNING Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed...

Page 9 - GENERAL

9 INSTALLATION GENERAL This appliance should be connected to the power supply by a recognized fitter who is familiar with, and works according to the correct safety regulations. This appliance meets the European requirements. IMPORTANT • The minimum distance between the supporting surface for the co...

Page 10 - ELECTRICAL CONNECTION

10 electrolux.com.au INSTALLATION (CONTINUED) ELECTRICAL CONNECTION This appliance is manufactured in class I, it must therefore be connected to the earth system. Make sure the supply voltage ratings correspond with those stated on the appliance data plate. The connection to the mains is carried out...

Page 12 - STEPS TO INSTALL

12 electrolux.com.au STEPS TO INSTALL 1. Open the panel. 2. Remove the grease filter. 3. Disconnect the plug connection for the controls and also the plug connection for the LED lighting. 4. First remove the 6 screws, followed by the frame. 5. Use a saw to create a recess in the bottom side of the c...

Page 13 - NOTES

Page 15 - Warranty

15 This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in...

Electrolux ERI842DSD - User Manual

Table of Contents:

Summary

Other Electrolux Range Hoods Models