Crimestopper CS-2004TW1 - Manual
Crimestopper CS-2004TW1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; System Wiring Diagram..............................................................................................................11; INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING
- Page 3 – CONTROL MODULE / COMPONENT MOUNTING; DO NOT; The alarm control module; WIRING; BLACK WIRE: CHASSIS GROUND
- Page 4 – PINK; OPTIONAL CAR JACK WIRING: SWITCH; HIDDEN BUTTON or
- Page 5 – Choose One; Auxiliary 15A On-Board
- Page 6 – The Sensor supplied with; single stage sensors); Negative Dome Light System:
- Page 7 – GRAY; CUT; KEY
- Page 8 – POWER DOOR LOCK WIRING; Normally Open [Polarity Input for Lock relay]; DETERMINING DOOR LOCK TYPE:
- Page 9 – POWER DOOR LOCK DIAGRAMS
- Page 10 – STARTER DISABLE WIRING; Normally Closed Starter disable
- Page 11 – SYSTEM WIRING DIAGRAM; Series II
- Page 12 – WINDSHIELD; ANTENNA; RECOMMENDED
- Page 13 – OPTION PROGRAMMING; To Engage Option Programming:
- Page 14 – AUTOLOCK WITH IGNITION
- Page 15 – DOUBLE UNLOCK PULSE; PROGRAM OPTION RESET
- Page 16 – TRANSMITTER PROGRAMMING STEPS:; TRANSMITTER PROGRAMMING DIAGRAM ON NEXT PAGE.
- Page 17 – WAIT FOR; IGN; PRESS TOGETHER; PRESS LOCK BTN
- Page 18 – OPERATION; UNLOCK; LOCK; FEATURE; BUTTON
- Page 19 – ACTIVE ARMING
- Page 20 – SHOCK / IMPACT PROTECTION WITH PRE-WARNING
- Page 21 – DOOR OPEN WARNING
- Page 23 – VEHICLE 2; ON THE; CARJACK PROTECTION; PROGRAMMABLE ACTIVE CARJACK; CARJACK INFORMATION CONTINUED ON NEXT PAGE.
- Page 24 – PROGRAMMABLE PASSIVE CARJACK
SERIES II
CS-2004TW1
with 2-Way AM Pager/Remote & 1-Way ‘Sidekick’ Remote
CS-2004DC II
with two 1-Way Remotes
INSTALLATION & OPERATING INSTRUCTIONS
CONGRATULATIONS
on your choice of a Security System by Crimestopper Security Products Inc. This booklet
contains the information necessary for installing, using, and maintaining your 2004TW1 or 2004DC alarm system. If
any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support
number below.
This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation.
To ease installation, we suggest that
you READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDLINE and
the information contained herein may differ from your vehicle.
*IMPORTANT INFORMATION: Primary and Optional Features
-PRIMARY:
These are features that must be connected in order for the system to operate properly i.e. Siren,
L.E.D., Power, Ground, Door Pin, Flashing Lights etc.
-OPTIONAL:
These are features are to be connected only if desired or agreed upon by the customer and the
installing dealer (i.e. Door Locks, Starter Disable, Hood/Trunk Protection and Auxiliary Remote Outputs etc.) These
features may also require additional parts and/or labor fees. Consult with your installer beforehand to be sure of
what is going to be installed with your particular system.
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions: 1) This device may not cause interference, and (2) this device must accept any
interference that may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modification could void the user's
authority to operate the equipment.
TECH SUPPORT
(800) 998-6880
Hours: M-F 8:00AM-4:30PM
Pacific Std. Time
REV A 12.2003
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS Installation Cautions & Warnings…….……………………………………………………………...………………2 Suggested Component Mounting………….…………………………………………………………….…………..3 Wiring……..…………………………………………………………………………………………………………….3-7 Power Door Lock Wiring...………………………………………………………………..…………………………8-9 Starter Disable Wiring…...
CONTROL MODULE / COMPONENT MOUNTING DO NOT Mount the control unit or wiring harness in the engine compartment or anywhere they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column. The alarm control module should be mounted in a concealed location. The anten...
WIRING BLUE WIRE: (-) HOOD/TRUNK TRIGGER The Blue wire is used for a grounding hood pin switch, trunk pin or both. Connect to existing hood and trunk pin switches that read ground when open. If no existing switches are available, install new pin switches if desired. GREEN WIRE: (-) DOOR TRIGGER Conn...