ClearSounds CSC600 - Manual

Table of Contents:

• Page 2 – IMPORTANT SAFETY INSTRUCTIONS
• Page 4 – PLEASE SAVE THESE INSTRUCTIONS
• Page 5 – Installation of your ClearSounds; the Caller ID Screen.; INSTALLING THE OPTIONAL BATTERIES; stored numbers in memory and in the phone book.; Replace the battery compartment door and screw back in place.; BATTERY SAFETY; the batteries in correctly.
• Page 6 – NOTE: Disposing of used batteries improperly may cause en-; PHONE MOUNTING INSTALLATIONS; The telephone may be placed on a shelf or table, or may be fixed to; Connect the handset coil cord (curly cord) to the handset and to the; Wall Mount Use; phone cord underneath wall plate adapter and through the opening.
• Page 7 – Connect the handset coil cord (curly cord) to the handset and to the; SETTING UP PHONE; Redial Function; Making A Call Using The Speakerphone; Adjustment Switch located to the side of the telephone.
• Page 8 – On completion of the call, press the SPEAKER button again.; Receiving/Answering A Call Using The Speakerphone; SPEAKER; Using the Amplification Function; Once you have dialed the phone or answered a call, press the “AMP”; This telephone can produce very high (loud) sound
• Page 9 – potentially result from misuse.; Using the volume reset override; We do not recommend that you program 911 into any
• Page 10 – located under the base.; NOTE: Numbers will be lost if the phone is not receiving any power,; USING AUDIO AND TELEPHONE HEADSET ACCESSORY JACKS; Yo
• Page 11 – FUNCTION OPERATION; SETTING UP THE PHONEBOOK; To add name and numbers to the Phone Book
• Page 12 – To review the phone book number; number and the name will display on the LCD.; To delete a single phone book number; Note: If you subscribe to Caller ID service from your local phone
• Page 14 – CALLER ID SYSTEM OPERATION; Review Your Caller ID Records; NOTE: Your phone stores up to 99 call records before the; Using the Call Back Feature
• Page 15 – Time and Date
• Page 16 – arrow button to
• Page 17 – TROUBLESHOOTING; If you have problems with your CSC600, please check below for; Adapter are securely plugged into the telephone & wall jack.; No audible ringer; Check to see if the AMPLI amplify button is “ON”. The red light should
• Page 18 – set to ON; Cannot dial out of Caller ID; Make sure your area code is set up properly.
• Page 19 – FCC REGISTRATION INFORMATION; Commission (FCC). This product complies with standards in Part 68; Connection and Use with the Nationwide Telephone Network; as soon as possible. Your telephone company may make changes in its; Interference Information: Part 15 of FCC Rules
• Page 20 – INDUSTRY CANADA CS03 STATEMENT; to be connected to a telephone interface.
• Page 21 – LIMITED ONE-YEAR WARRANTY; material and workmanship under normal use for one (1) year from the
• Page 22 – Service in United States; Attention: Repair Center