ClearSounds A1600E - Manual

6 – ENGLISH Base Desk/Table Mounting 1. Plug the AC power adapter into the jack on the back of the base, then plug the AC adapter into a standard electrical outlet or surge protector. Note : The adapter is required for the phone to work. Installing Batteries Three AAA re-chargeable Ni-MH batteries c...

7 – ENGLISH Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3. After the batteries are fully charged, begi...

8 – ENGLISH Screen Navigation If you press under the word Back on the screen from any menu, the phone returns to the previous screen. To return to the main screen at any time, press . The phone will automatically return to the main screen from any menu if no key is pressed for 30 seconds. “Standby” ...

9 – ENGLISH █ Registering the Handset Up to 4 additional A1600E handsets can be registered to the base.1. Before registering an additional handset to the base, you should press and hold the page key , which is located on the main base, for about 5 seconds and then release it. 2. Press under the word...

11 – ENGLISH █ Handset Name This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name:1. Press under the word Menu on the screen to display the main menu list. 2. Press up or down...

13 – ENGLISH TROUBLESHOOTING No dial tone 1. Check that all phone cord connections and AC adapter are securely plugged into the phone, wall jack and electric outlet of the main base. 2. Check that the AC adapter is securely plugged into the A1600E base and electric outlet. 3. Check that the handset ...

14 – ENGLISH TECHNICAL SPECIFICATIONS General Number: A1600E Amplification: 125dB SPL Power Requirements: Base Input: 7.5V, 500mA Handset Input: Ni-MH 1.2V x 3, 600mAh Charging Time: 15 hours Jack: 2.5 mm headset 3.5 mm audio Features and Specifications subject to change without notice. Purchase acc...

15 – ENGLISH FCC WANTS YOU TO KNOW 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier of [US: CLSTE12B]. If requested, this number must be provided ...

16 – ENGLISH 7. If the phone company requests information on what equipment is connected to their lines, inform them of: a) The phone number that this unit is connected to, b) The ringer equivalence number [1.2B] c) The USOC jack required [RJ11C], and d) The FCC Registration Number [US:] Items (b) a...

17 – ENGLISH INDUSTRY CANADA CS03 STATEMENT This product meets the applicable Industry Canada technical specification. This is confirmed by the registration number. The abbreviation, IC before the registration number signifies that registration was performed based on a Declaration of Conformity indi...

18 – ENGLISH LIMITED ONE-YEAR WARRANTY The product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Should you experience a problem, contact our customer service department or visit our website at www.cl...

19 – ENGLISH Authorization number and shipping instructions before shipping the product to us. Any shipment without a (RMA) Return Merchandise Authorization number will not be accepted and will be returned to you at your expense. All authorized returned products must be accompanied with proof of pur...