Chicago Electric 91212 - Manual

Chicago Electric 91212 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Welding Helmet; Specifications; Model; Save This Manual; Keep work area clean; . Do not use machines or power tools in damp or wet; Keep children away; . Children must never be allowed in the work area. Do not let them
Page 4 – Inhalation Hazard; Welding Produces TOxIC FUMES and GASSES.; cancers, such as cancer of the larynx and lung cancer.; Always keep sensors and solar cells clean using
Page 5 – Before First Use; Leave the solar panel on the helmet facing the sun for at least 4; Before Each Use; If a selection of shades are recommended; try the darkest setting first.; Shade Guide Chart
Page 6 – Product Features/Operation
Page 7 – immediately; if; any; of the above-mentioned problems can’t be corrected.
Page 8 – MAINTENANCE CONTINUED; film on. Place the new Lens into the right position by bending it; Tabs
Page 9 – Parts List and Assembly Diagram; certain to specify which model they are for.

Loading the manual

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

2006 by Harbor Freight Tools

or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Manual revised 06h

AUTO-DARKENING WELDING HELMET

with ANSI-Approved Lens

NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual.

Aside from the slight differences noted in this manual, the warnings, operation

instructions, and maintenance procedures will remain the same.

TO PREVENT SERIOUS INjURY OR BLINDNESS,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Distributed exclusively by Harbor Freight Tools

91212, 91214, 94336, 94337

Models

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Welding Helmet; Specifications; Model; Save This Manual; Keep work area clean; . Do not use machines or power tools in damp or wet; Keep children away; . Children must never be allowed in the work area. Do not let them

Auto-Darkening For technical questions, please call 1-800-444-3353. Page 2 Welding Helmet Specifications Model 91212 91214 94336 94337 Shell Designs Blue Flames Eagle Skull Power Source Solar Cells (rechargeable battery included, no additional battery required) Solar Cells (rechargeable battery incl...

Page 4 - Inhalation Hazard; Welding Produces TOxIC FUMES and GASSES.; cancers, such as cancer of the larynx and lung cancer.; Always keep sensors and solar cells clean using

Auto-Darkening For technical questions, please call 1-800-444-3353. Page 4 Welding Helmet 17. Use only at temperatures within the operating range for your model as stated on the specifications chart on page 2. 18. Inhalation Hazard Welding Produces TOxIC FUMES and GASSES. Exposure to welding gasses ...

Page 5 - Before First Use; Leave the solar panel on the helmet facing the sun for at least 4; Before Each Use; If a selection of shades are recommended; try the darkest setting first.; Shade Guide Chart

Auto-Darkening For technical questions, please call 1-800-444-3353. Page 5 Welding Helmet Before First Use 1. The Auto-Darkening Welding Helmet needs to be charged prior to use and after extended storage. Leave the solar panel on the helmet facing the sun for at least 4 hours before first use. 2. Re...