Teledyne T265 - Manuals

v TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION ....................................................................................................................... I ABOUT THIS MANUAL ..................................................................................................................

9 2. SPECIFICATIONS, APPROVALS, & CERTIFICATIONS Table 2-1 presents the specifications for the Model T265 analyzer. This is followed by EPA and Safety and Emissions Compliance information. 07337B DCN6324

Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual Specifications, Approvals, & Certifications 11 2.1 EPA DESIGNATION Teledyne API’s Model T265 Chemiluminescence Ozone Analyzer received EPA approval for Designation EQOA-0611-199. The designation will be considered valid wh...

13 3. GETTING STARTED This section addresses the procedures for unpacking the instrument and inspecting for damage, and introduces the instrument layout, then presents the procedures for getting started: making electrical and pneumatic connections, and conducting an initial calibration check. Please...

Getting Started Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual 14 CAUTION Remove dust plugs from pneumatic fittings on the rear panel of the analyzer, prior to applying power to the analyzer. Note It is recommended that you store shipping containers/materials for future us...

Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual Getting Started 15 3.2 INSTRUMENT LAYOUT Instrument layout includes front panel and display, rear panel connectors, and internal chassis layout. 3.2.1 Front Panel Figure 3-1 illustrates the front panel of the Model T265 analyz...

Getting Started Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual 18 3.3 CONNECTIONS AND SETUP This section presents connection information for setting up the instrument to operate. 3.3.1 Electrical and Pneumatic Connections 1. Refer to Figure 3-2 for the rear panel electrica...

Getting Started Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual 20 STARTUP, FUNCTIONAL CHECKS, AND INITIAL CALIBRATION 3.4.1 Startup 1. Turn on the instrument by pressing the on/off rocker switch on the front panel. The display should immediately light, showing the computer...

Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual Getting Started 21  Setting the range and inputting the expected ozone span gas concentration  Performing a zero/span calibration  Running a calibration quality check Part 1 - Set the range, then enter the expected ozone sp...

23 4. MAINTENANCE 4.1 MAINTENANCE SCHEDULE CAUTION The operations outlined in this section are to be performed by qualified maintenance personnel only. Please refer to the Instrument Maintenance section of the Model T200 manual for maintenance items and their interval schedules. Exceptions:  “Ozone...

25 5. PRINCIPLES OF OPERATION The Teledyne API Model T265 analyzer is designed to measure the concentration of ozone using the chemiluminescence reaction below. The signal comes from the light emitted by the gas phase reaction of nitric oxide (NO) and ozone (O 3 ) as follows: 2 * 2 3 O NO O NO   ...

A-1 APPENDIX A: Models T265 and 265E Menu Trees The following menu trees in this appendix show the structure of the Sample menu and the Setup submenu. For additional details refer to Appendix A of the Model T200 operation manual. 07337B DCN6324

APPENDIX B - Spare Parts Note Use of replacement parts other than those supplied by Teledyne Advanced Pollution Instrumentation (TAPI) may result in non-compliance with European standard EN 61010-1. Note Due to the dynamic nature of part numbers, please refer to the TAPI Website at

T265 Spare Parts List (Reference: 07388 06/01/2011, 15:53) PARTNUMBER DESCRIPTION 000940600 CD, ORIFICE, .010 BROWN 000941800 CD, ORIFICE, .001, RED/BLK 001330000 SLEEVE, 303 SS (UNPLATED) (KB) 002160000 ASSY, SCRUBBER, M200A/AH/M100AH, PUMPACK 002270100 AKIT, GASKETS, WINDOW, (12 GASKETS = 1) 00273...

Appendix C Warranty/Repair Questionnaire M265E and T265 (P/N 074990000 Rev A, DCN# 6167) TELEDYNE API CUSTOMER SERVICE EMAIL: [email protected] PHONE: (858) 657-9800 TOLL FREE: (800) 324-5190 FAX: (858) 657-9816 2. WHAT ARE THE RCELL & SAMPLE PRESSURES WITH THE SAMPLE INLET ON REA...

APPENDIX D – Wire List and Electronic Schematics 07337B DCN6324 D-1