Star Trac Shoulder Press - Manuals

PARTS AND MATERIALS The following parts are included with the STAR TRAC INSTINCT SHOULDER PRESS T OOLS R EQUIRED Most STAR TRAC INSTINCT machines can be assembled using the following tools: Your INSTINCT SHOULDER PRESS includes a hex key set and combination open-end wrench. SITING REQUIREMENTS Your ...

W EIGHT B ELT I NSPECTION R EQUIREMENTS WARNING: REPLACE WORN WEIGHT BELTS IMMEDIATELY. FAILURE TO COMPLY CAN RESULT IN HAZ- ARDOUS CONDITIONS FOR USERS OR OTHER BYSTANDERS. Inspect all weight belts for evidence of excessive wear or other damage. Give particular attention to the following conditions...

3. Assemble the Weight Stack NOTE: Two people are required to assemble the weight stack; one to hold the weight stackguide posts in position, and one to assemble theweight stack components onto the posts. Slide one weight stack support (29) onto eachweight stack guide post (14). Insert the weight st...

CAUTION: Do not "high pin" and/or "double pin" a weight stack. This action is con- sidered to be dangerous to users, and bystanders, and may damage your INSTINCT SHOULDER PRESS . Aside from the mechanical damage that may result, such action(s), in part, may cause the weight stack to ...

6. Install the Weight Stack Shrouds NOTE: It is necessary to flex the lower shrouds (9, 27) slightly to engage the matinggrooves in the weight stack frame (1). Slide the lower front shroud (9) into the mat-ing grooves in the weight stack frame (1). Slidethe lower rear shroud (27) into the matinggroo...