Star Trac ip-l8505 - Manuals

Page 3 - TABLE OF CONTENTS

Page 3 TABLE OF CONTENTS • SAFETY INSTRUCTIONS / WARNINGS • WARNING LABLES WITH PART NUMBERS • EXERCISE GUIDELINES • MAINTENANCE AND SERVICE • WARRANTY COVERAGE • INSTALLATION INSTRUCTIONS • HARDWARE 4 6 7 8 9 11 21

Page 4 - Safety Instructions; Max Rack Safety Information and General Exercise Guidelines; Safety Information; WARNING: Serious injury or death could occur if these; Obtain a medical exam prior to beginning an exercise program.

Page 4 Safety Instructions Max Rack Safety Information and General Exercise Guidelines Safety Information Read the Max Rack Owner's Manual carefully before assembling, servicing or using the Max Rack. ! WARNING: Serious injury or death could occur if these safety precautions are not observed: 1. Do ...

Page 5 - Keep a repair log of all maintenance activities.

Page 5 NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is performed. 15. SECURING EQUIPMENT: All STAR TRAC equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed con...

Page 7 - Exercise Guidelines; consult with a physician.

Page 7 Exercise Guidelines • Like most exercise, strength training involves an element of risk. Utilize this information to assist you and/or your members in making the experience on STAR TRAC both productive and safe. • Prior to engaging in any strength-training program, individuals with known heal...

Page 8 - MAINTENANCE AND SERVICE; following guidelines are suggested.; GENERAL CLEANING; Dry the Max Rack with a soft cloth to prevent rust.; Do not use grease or heavy lubricating oil.

Page 8 MAINTENANCE AND SERVICE The Max Rack requires very little upkeep to keep your Max Rack performing at its best, the following guidelines are suggested. GENERAL CLEANING LUBRICATION OF GUIDE RODES Wipe the Max Rack with a light all-purpose cleaner, such as diluted Simple Green at a 30:1 solutio...

Page 9 - Warranty Coverage

Page 9 Warranty Coverage Star Trac commercial exercise equipment (.Product.) is warranted to be free of all defects in material and workmanship. Star Trac warrants all structural frameworks for a period of 10 years. This limited warranty on structural frame does not include coatings. The following m...

Page 10 - Exclusive warranties; Changes in warranty that are not authorized

Page 10 Exclusive warranties THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither...

Page 11 - INSTALLATION INSTRUCTIONS

Page 11 INSTALLATION INSTRUCTIONS 2 • 17mm Box / Open-End Wrenches • • • • • • • • • • •• • • • • • • • • 2 • 13mm Box / Open-End Wrenches •• • • • • •• • • • • • • • • • • • REQUIRED TOOLS: GENERAL NOTES: • Unless otherwise noted Loctite 242/243 or equivalent thread locker must be used on all threa...

Page 14 - UPRIGHT MAIN ASSEMBLY:

Page 14 UPRIGHT MAIN ASSEMBLY: NOTE: due to the weight of the assembly, you should always have at least 2 people when moving these assemblies. 1. Lay assembly on its side. Support legs as you rotate assembly. Note: take special care not to drop the assembly. 2. Lift top of assembly to upright the Ma...

Page 15 - INSTALL WEIGHT HOLDERS:; sure you use the right length of bolt.; INSTALL LOWER BRACES:; NOTE: Make sure you use the right

Page 15 INSTALL WEIGHT HOLDERS: 1. Take the (2) weight holder weldments (PN:731-2355-XX) from the packaging. 2. Using (2) mounting plate (PN:731-23), (4) m10 x 140 Hex Head Bolts (PN:731-2398), (8) m10 Washers (PN:731-2419), and (4) m10 Nyloc Nuts (PN:731-2420), install the weldment to the back of t...

Page 17 - INSTALL UPPER GUIDE RODS:; DO NOT; INSTALL BEARING MOUNTS TO BAR:

Page 17 INSTALL UPPER GUIDE RODS: 1. Take (2) Ø25mm Guide Rods (PN:731-2392) and the Upper Bearing Weldment (PN:731-2349-XX) from the packaging. 2. You will use (4) Spacer rings (PN:731-2395), (4) m10 x 25 Hex Head Bolts (PN:731-2333), and (4) m10 Large Washers (PN:731-2396), to install the Guide Ro...

Page 20 - INSTALL WEIGHT HORNS:

Page 20 INSTALL WEIGHT HORNS: 1. Take the (4) Long Weight Horn weldments (PN:731-1454), (4) Short Weight Horn weldments (PN:731-2297), (12) Weight Horn Covers (PN:731-1376), (12) Base Covers (PN:731-1373), and (12) End Caps (PN:731-1374) from the packaging. 2. Using (16) M8 x 75mm Hex Head Bolts (PN...

Page 22 - MACHINE CLEARANCE AND SPACING; FINAL ASSEMBLE CHECK SHEET; Make sure ALL fasteners are tightened to specifications is this

Page 22 Before using this product, it is essential to read the ENTIRE operations manual and ALL installation Instructions. The Owner’s manual describes equipment setup and instructs members on how to use it correctly and safely. Health related injuries may result from incorrect or excessive use of e...