Star Trac Inner/Outer Thigh Machine - Manuals

PARTS AND MATERIALS The following parts are included with the STAR TRAC INSTINCT INNER THIGH / OUTER THIGH : T OOLS R EQUIRED Most STAR TRAC INSTINCT machines can be assembled using the following tools: Your INSTINCT INNER THIGH / OUTER THIGH includes a hex key set and combination open-end wrench. S...

MAINTENANCE PROCEDURES F RAMEWORK M AINTENANCE CAUTION: DO NOT use lacquer thinner, acetone, or other solvents to clean powder-coated finishes on the framework or other structural components. Solvents will dull the finish, and contain components that may remove the epoxy-based powder from the frame....

3. Assemble the Weight Stack NOTE: Two people are required to assemble the weight stack; one to hold the weight stack guideposts in position, and one to assemble theweight stack components onto the posts. Slide one weight stack support (61) onto eachweight stack guide post (48). Insert the weight st...

ANCHORING IMPORTANT: The INSTINCT INNER THIGH / OUTER THIGH must be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. Failure to anchor the unit will void the warranty. STAR TRAC shall not be liable for damage or injury caused b...

5. Install the Foot Pedals Slide the left and right pedals (6, 7) onto thepedal shafts (47). Insert the pins of the pedal link (16) into the linkflanges on the left and right pedals (6, 7). Securethe pedal link to the left and right pedals usingtwo lock nuts (82). Tighten the nuts securely. Align th...