Star Trac Bike Computer - Manuals

4 Start pedaling then press any button to turn on the spinning computer. Pressing the Left button (LIGHT BUTTON) turns on the backlight for low lit rooms. Pressing the Right button (TOGGLE BUTTON) displays the following information: HR - Displays the Heart Rate of the user wearing a compatible Polar...

5 Setup is required only if you need to change a setting or view information. To activate Set-Up Mode: 1. Press any button to activate computer. 2. Wave a magnet along the right side of the Spinning ® Computer until the display window shows all LCD segments flash. 3. Press Toggle (right) button to s...

8 Syncing will need to be performed in any of the following events: • First receiving the Spinning Computer Kit. • Changing the 4AA batteries on the Computer. • The original cadence and computer are no longer a pair. (i.e. when users swap handlebars with the computer attached.) Syncing process when ...

10 1. Before the cadence sensor is securely fastened to the flywheel dropout, it must be adjusted so that it is about 5 mm (.20 in) from the magnet face. Install the magnet on the flywheel so that it aligns with the arrow on the end of the cadence sensor. Note the distance between the end of the cad...

11 Time required: • 15 Minutes Parts required: • 727-0083 Spinning® Computer Kit NOTE: The thick insert is used on the V bikes Tools required: • M5 Allen Wrench • M2 Allen Wrench 4. Place the thick insert inside the bottom part of the Mounting Bracket Clamp. Then position the mounting bracket onto t...

14 Time required: • 5 Minutes Parts required: • 4 AA Alkaline batteries Tools required: • Slotted or Phillips Screwdriver 1. Remove the computer from the handlebar or Spin Computer Mounting Bracket. 2. Loosen the captive screw on the back of the battery cover (Screw will not completely come off, it ...

15 • No Display o Press any button o Pedal the bike and then press any button o Check batteries in computer • No Heart Rate o Is the user wearing a Polar brand heart rate strap? o Moisten the strap and wear it against the skin o The battery in the strap might be low, try another strap • Which Heart ...

16 • No RPM o Is the magnet on the left side of the flywheel and aligned with the cadence sensor? o Sync up the computer and cadence unit. o Check the battery in the cadence sensor o If pedaling exceeds 120 RPM, the computer will flash the 120 value until rpm’s decrease. • What is the battery life? ...

17 Computer: Heart Rate Range Approximately 30” From Computer to users HR strap Battery Qty 4 each AA Alkaline Battery life expectancy 1 year (depending on use and backlight usage) Cadence unit: Battery Lithium CR2032 Battery life expectancy approximately 2.5 Years (depending on use) Distance to mag...

18 Marketing Statement Regarding Heart Rate Acquisition on the Star Trac Spinning ® Computer: Star Trac takes the acquisition and accuracy of heart rate very seriously and has developed a system to perform to the best ability that technology will allow. Star Trac has engineered a product that has ta...

20 Star Trac strongly recommends performing the regular daily, weekly and monthly preventive maintenance routines outlined below. If any items need replacement call STAR TRAC PRODUCT SUPPORT DEPARTMENT at (800) 503 -1221, or USA 1-714-669-1660. To order replacement parts we will need the serial numb...

21 CADENCE, RESISTANCE AND INTENSITY Understanding the relationship between cadence, resistance and intensity is key to Spinning® program classes that meet training goals. By using the Spinner® computer, you will become more proficient at increasing power, gaining efficient leg speed and mastering t...