Stanley DH9000 - Manuals

DH USER MANUAL 5 Safety symbols and signal words, as shown below, are used to emphasize all operator, maintenance and repair actions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equip- ment. This safety alert and signal word indicate an im...

6 DH USER MANUAL WARNING Do not operate the tool unless the following safety instructio ns have been thoroughly read and understood! Read this manual before ins talling, operating or maintaining this equipment. A flying projectile from the tool, Rock or other material may enter the operator's compar...

DH USER MANUAL 7 Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety. Review them carefully before operating the tool and before per...

8 DH USER MANUAL • The operator must not operate the tool or carrier if any people are within the area where they may be injured by flying debris or movement of the equipment. • Know the limits of your equipment. • Establish a training program for all operators to ensure safe operation. • Do not ope...

DH USER MANUAL 9 67768 DH1500 Model Number Sticker 67735 DH3500 Model Number Sticker 67780 DH9000 Model Number Sticker Specification Plate 68641 DH1500 CE Spec Plate 68581 DH3500 CE Spec Plate 70982 DH9000 CE Spec Plate 67861 Stability Sticker Refer to the Parts Illustration page in this manual for ...

10 DH USER MANUAL Before connecting the drop hammer to the carrier hydraulic system; it is important to determine which are the pressure and tank lines of the carrier and connect the hoses appropriately. The pressure and tank lines are marked where they enter the valve block. If the hydraulics are c...

DH USER MANUAL 11 OPERATION NOTICE Failure to remove the travel lock may result in damage to the equipment during operation. Exposure to silica dust during construction activities can cause serious or fatal respiratory disease. Use adequate respiratory protection. OPERATION Ensure that the drop hamm...

12 DH USER MANUAL 1. Tip the drop hammer to a horizontal position. 2. Gradually move the drop hammer past horizontal until the weight slides forward. This can be done in a controlled manner by shaking the weight out using the curl lever. 3. Allow the Hammer to slide out until it hits against the Saf...

DH USER MANUAL 13 Check the chain adjustment bolts and secure the nuts if required. Check the Housing Cover plate bolts and tighten if needed. Check the hydraulic hoses, fittings and valves for any leaks and repair as required. With the machine turned off, oil the chain over the top sprocket with a ...

14 DH USER MANUAL This section describes how to find and resolve problems users may experience. If a situation occurs that is not covered, call your Stanley Customer Service representative for assistance. Inspecting the tool or installing parts with the hydraulic hoses connected can result in severe...

DH USER MANUAL 15 DIMENSIONS AND WEIGHTS Weight w/o Mounting Bracket DH1500 ....................................................................................................................................................700 lbs / 317.5 kg DH3500 .....................................................

16 DH USER MANUAL MODEL & SERIAL NUMBER LOCA TION DH1500 PARTS ILLUSTRATION

18 DH USER MANUAL MODEL & SERIAL NUMBER LOCA TION DH3500 PARTS ILLUSTRATION

20 DH USER MANUAL MODEL & SERIAL NUMBER LOCA TION DH9000 PARTS ILLUSTRATION

Stanley Hydraulic Tools 3810 SE Naef Road Milwaukie, Oregon 97267 503-659-5660 / Fax 503-652-1780 www.stanleyhydraulics.com