Stanley 387002x92NA - Manuals

Page 2 - TABLE OF CONTENTS; Two Year Limited Warranty

2 F–040700C TABLE OF CONTENTS WARRANTY 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RESPONSIBILITY OF THE OWNER 3 . . . . . . . . . . . . . . . . . . SAFETY RULES 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTERNATIONAL PICTORIALS 9 . ....

Page 3 - OWNER’S INFORMATION; RESPONSIBILITY OF THE OWNER; Environmental Awareness; SAFETY RULES

OWNER’S INFORMATION 3 F–040700C This instruction book is for several different models. The instructions are written for a person with some mechanical ability. Like most ser- vice books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some...

Page 4 - DO; DO NOT

OWNER’S INFORMATION 4 F–040700C c. Do not turn sharply. Use care when backing. d. Use counterweights or wheel weights when suggested in the Instruction Book. 18. Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this ...

Page 5 - SAFE MOWING GUIDE

SAFE MOWING GUIDE 5 F–040700C Each person that operates power equipment must learn to use correct and safe mowing procedures. To help you learn, carefully read the following pages. Most of the time the operator was not correctly shown or did not read the instructions on the unit or in the Instructio...

Page 8 - STEPS TO FOLLOW; BEFORE MOWING; WARNING: Look for this symbol to point out important

STEPS TO FOLLOW 8 F–040700C BEFORE MOWING F Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes. F Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. F Fill the fuel tank outside. Clean off spilled fuel. F Read and fol...

Page 9 - INTERNATIONAL PICTORIALS; Safety Warning Pictorials

INTERNATIONAL PICTORIALS 9 F–040700C INTERNATIONAL PICTORIALS IMPORTANT: Some of the following pic- torials are located on your unit or on literature supplied with the product. Be- fore you operate the unit, learn and un- derstand the purpose for each pictorial. Safety Warning Pictorials 1 Warning 2...

Page 10 - ASSEMBLY; PARTS BAG – CONTENTS

ASSEMBLY 10 F–040700C ASSEMBLY This instruction book is for several models. Some parts or accesso- ries are not included on all models. Read and follow the assembly and adjustment instructions for your mower. All fasteners are in the parts bag. Do not discard any parts or material until the unit is ...

Page 11 - MAINTENANCE FREE BATTERY; HOW TO CHARGE THE MAINTENANCE FREE BATTERY; HOW TO REMOVE THE BATTERY

ASSEMBLY 11 F–040700C MAINTENANCE FREE BATTERY IMPORTANT: Before you attach the battery cables to the battery, check the battery date. The battery date tells if the battery must be charged. 1. Check the top of the battery for the location of the battery date (Figure 2). 2. If the battery is put into...

Page 12 - HOW TO INSTALL THE SEAT

ASSEMBLY 12 F–040700C HOW TO INSTALL THE SEAT Use the fasteners shown below to install the seat . The fasteners are shown at full size. (A) 1001054 (B) 17x47 1. Carefully remove the plastic bag from the seat. 2. Align the holes in the seat hinge to the holes in the seat (Figure 4). Fasten the seat t...

Page 13 - IMPORTANT! BEFORE YOU START MOWING; Check the engine oil.; HOW TO PREPARE THE ENGINE

ASSEMBLY 13 F–040700C IMPORTANT! BEFORE YOU START MOWING - Check the engine oil. - Fill the fuel tank with gasoline. - Check the level of the mower housing. - Check the air pressure of the tires. - Make sure the battery cables are attached. WARNING: Before doing any assembly or mainte- nance to the ...

Page 14 - OPERATION; LOCATION OF CONTROLS

OPERATION 14 F–040700C ÎÎ ÎÎ ÎÎ ÎÎ Figure 7 Ignition Headlight Switch Parking Brake Lever Lift Lever Throttle Control Lever Blade Rotation Control Shift Lever Clutch / Brake Pedal LOCATION OF CONTROLS BLADE ROTATION CONTROL: Use the blade rotation control to start and stop the rotation of the blade....

Page 15 - ATTACHMENTS; HOW TO USE THE BLADE ROTATION CONTROL; HOW TO USE THE SHIFT LEVER

OPERATION 15 F–040700C ATTACHMENTS This unit can use many different attachments. See the attachment page in this book. This unit can pull attachments like a lawn sweeper, a lawn aerator, a hopper spreader or a small trailer. This unit can not use attachments that engage the ground like a plow, a dis...

Page 16 - HOW TO SET THE PARKING BRAKE; HOW TO STOP THE UNIT

OPERATION 16 F–040700C HOW TO SET THE PARKING BRAKE 1. Completely push the clutch/brake pedal forward.2. Lift the parking brake lever (Figure 9). 3. Remove your foot from the clutch/brake pedal and then release the parking brake lever . Make sure the parking brake will hold the unit. 4. To release t...

Page 17 - HOW TO OPERATE WITH THE MOWER HOUSING; HOW TO OPERATE THE UNIT ON HILLS

OPERATION 17 F–040700C HOW TO OPERATE WITH THE MOWER HOUSING WARNING: The deflector is a safety device. Do not re- move the deflector. The deflector forces the dis- charged material toward the ground. Always keep the deflector in the down position. If the deflector is dam- aged, replace the deflecto...

Page 18 - BEFORE STARTING THE ENGINE; CHECK THE OIL; CARBURETOR

OPERATION 18 F–040700C BEFORE STARTING THE ENGINE CHECK THE OIL NOTE: The engine was shipped from the factory filled with SAE 30 weight oil. Check the level of the oil. Add oil as needed. 1. Make sure the unit is level. NOTE: Do not check the level of the oil while the engine runs. 2. Clean the area...

Page 19 - OPERATING TIPS

OPERATION 19 F–040700C OPERATING TIPS 1. Check the blade rotation control for correct adjustment. For the blade(s) to disengage correctly, the adjustment must be cor- rect. 2. Before you use the unit, check the oil in the engine and add oil if necessary. 3. If the engine will not start, first make s...

Page 20 - MAINTENANCE; MAINTENANCE CHART; HOW TO CHECK THE MUFFLER

MAINTENANCE 20 F–040700C MAINTENANCE CHART PROCEDURE EACH USE FIRST 2 HOURS EVERY 25 HOURS EVERY 50 HOURS EVERY 100 HOURS BEFORE STORAGE Blade, Inspect and Sharpen √ Blade Rotation Control, Check √ M Brake, Check √ MOW Clutch, Check √ W E Tires, Check √ √ E R Battery, Check and Charge √ √ Battery, C...

Page 21 - INSPECT BLADE

MAINTENANCE 21 F–040700C INSPECT BLADE WARNING: Before you inspect or remove the blade, disconnect the wire to the spark plug. If the blade hits an object, stop the engine. Check the unit for dam- age. The blade has sharp edges. When you hold the blade, use gloves or cloth material to protect your h...

Page 22 - HOW TO ADJUST THE BLADE ROTATION CONTROL

MAINTENANCE 22 F–040700C HOW TO ADJUST THE BLADE ROTATION CONTROL WARNING: To prevent an injury, the blade rotation control must operate correctly. 1. Stop the engine. Disconnect the wire from the spark plug.2. Before you adjust the blade rotation control , check and level the mower housing. See “Ho...

Page 23 - HOW TO CHECK AND ADJUST THE DRIVE BRAKE; HOW TO CHECK AND ADJUST THE CLUTCH

MAINTENANCE 23 F–040700C HOW TO CHECK AND ADJUST THE DRIVE BRAKE Completely push the clutch/brake pedal forward. Set the parking brake. Move the shift lever to the neutral (N) position. Push the unit. If the rear wheels rotate, adjust or replace the brake pads. Adjust the drive brake as follows. 1. ...

Page 25 - WHERE TO LUBRICATE; CHECK THE TIRES

MAINTENANCE 25 F–040700C WHERE TO LUBRICATE Lubricate the areas shown with engine oil. Apply grease with a brush to the areas shown. NOTE: Apply grease to the steering gear assembly. CAUTION: If the unit is operated in dry areas that have sand, use a dry graphite spray to lubricate the unit. Do not ...

Page 26 - HOW TO REMOVE THE MOWER HOUSING

MAINTENANCE 26 F–040700C HOW TO REMOVE THE MOWER HOUSING 1. Move the lift lever to the lowest position. 2. Move the blade rotation control to the DISENGAGE position. 3. Remove the hair pins and the washers from the adjusting rods (Figure 21). See illustrations “C” and “D”. 4. Remove the hair pins an...

Page 27 - HOW TO LEVEL THE MOWER HOUSING; THE SIDE TO SIDE ADJUSTMENT

MAINTENANCE 27 F–040700C HOW TO LEVEL THE MOWER HOUSING If the mower housing is level, the blade will cut easier and the lawn will look better. WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the spark plug wire to prevent th...

Page 28 - HOW TO REPLACE THE MOTION DRIVE BELT; REMOVAL

MAINTENANCE 28 F–040700C HOW TO REPLACE THE MOTION DRIVE BELT REMOVAL 1. Remove the mower housing. See the instructions on “How To Remove The Mower Housing”. 2. Completely push the pedal forward and engage the parking brake. 3. Remove the idler pulley (Figure 25). 4. Loosen the belt guides that are ...

Page 29 - HOW TO REPLACE THE MOWER DRIVE BELT

MAINTENANCE 29 F–040700C HOW TO REPLACE THE MOWER DRIVE BELT 1. Remove the mower housing. See the instructions on “How To Remove The Mower Housing”. 2. Pull the belt retainer away from the idler pulley and remove the mower drive belt (Figure 28). 3. Pull the belt retainer away from the right mandrel...

Page 30 - HOW TO INSTALL THE WHEELS; Front Wheel

MAINTENANCE 30 F–040700C HOW TO INSTALL THE WHEELS If the wheels must be removed for service, make sure they are installed as follows. Front Wheel 1. Make sure the valve stem is to the outside of the tractor. Slide the front wheel on the spindle (See Figure 29). 2. Fasten the front wheel with washer...

Page 32 - TROUBLE SHOOTING CHART

TROUBLE SHOOTING CHART 32 F–040700C PROBLEM: The engine will not start. 1. Follow the steps, “How To Start The Engine” in this book.2. Electric–Start Models: Clean the battery terminals. Tighten the cables. 3. Drain the fuel tank. Clean the fuel line. Replace the fuel filter.4. Remove the spark plug...

Page 33 - MURRAY, INC. LAWN MOWER CENTRAL PARTS DISTRIBUTORS; CPT CANADA POWER; Mississauga; Edmonton

F–040700C 33 Only use a factory repair part. Repair parts, except for the engine or the transmission, are available from the store where the unit was purchased, a service shop recommended by the store, or an authorized service shop found in the yellow pages of the telephone directory.If you cannot g...

Page 34 - REPAIR PARTS

REPAIR PARTS MODEL 387002x92NA 34 F–040700C CHASSIS & HOOD 26 15 26 16 17 18 19 20 21 20 22 23 26 27 26 26 29 30 31 33 34 35 36 37 38 35 44 25 25 25 24 32 41 26 1 2 45 3 4 5 6 7 8 9 10 11 12 13 14 39 35 40 46 47

Page 35 - Key

REPAIR PARTS MODEL 387002x92NA 35 F–040700C CHASSIS & HOOD Key No. Part No. Description Key No. Part No. Description 1 690566 Seat 2 094154E701 Support, Seat 3 094057 Spring, Seat 4 26x229 Screw 5 017x4 7 Washer 6 1001054 Bolt, Wing 7 009x56 Bolt 8 094156 Z Rod, Pivot 9 009x55 Bolt, Shoulder 10 ...

Page 49 - NOTES

Page 51 - INDEX

INDEX 51 F–030754L A Adjustments Blade Rotation Control, 22 Clutch, 23 Drive Brake, 23 Mower Housing, Level, 27 Attachments, 15, 52 B Battery Charge, 24 Check, 11 Clean, 24 Emergency Start, 18 Install, 11 Removal, 24 Storage, 31 Belt Motion Drive Adjust, 23 Replace, 28 Mower Drive Adjust, 22 Replace...

Page 52 - LAWN TRACTOR ACCESSORIES; Make your Lawn Tractor do more than you ever imagined.

52 F–030754L LAWN TRACTOR ACCESSORIES Make your Lawn Tractor do more than you ever imagined. The accessories shown on this page can be used on your Lawn Tractor. See the Store or Dealer where you purchased your Lawn Tractor. If you are unable to obtain the necessary information, contact the Central ...