Stanley 36SS - Manuals

2 30SS, 36SS, 45SS Rev: 12/21/2011 Preparation Safety Precautions Preparation—Safety Precautions 1. Inspect the area where the equipment is to be used and remove all objects such as rocks, mats, and wire which can be thrown by the machine causing serious injury or death. 2. Disengage all clutches an...

3 30SS, 36SS, 45SS Rev: 12/21/2011 Operation Safety Precautions Equipment Operation—Safety Precautions 1. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. Carbon monoxide is odorless, tasteless, and can be fatal. 2. Never operate the snow blower withou...

4 30SS, 36SS, 45SS Rev: 12/21/2011 Before attempting to use your snow blower, make sure you are familiar with all of the components and have read the manual. Need Help? Parts, Service and Technical Assistance call: 1-919-550-3221 ext. 158 Monday-Friday 8AM-5PM EST [email protected]...

5 30SS, 36SS, 45SS Rev: 12/21/2011 Safety Decals Safety Decal Identification The labels shown below are located on your snow blower to warn you of potential hazards and provide you with important safety information. If these decals become difficult to read or are missing from the snow blower, please...

6 30SS, 36SS, 45SS Rev: 12/21/2011 Product Specifications * Product Specifications may change without notice. Models Feature 30SS 36SS Product Type Snow blower Snow blower Clearing Path 30” 36” Engine 302cc, 11HP 420cc, 15 HP Engine Start 120V Electric Start and recoil 120V Electric Start and Recoil...

7 30SS, 36SS, 45SS Rev: 12/21/2011 Control Panel and Snow Blower Components Snow Blower Component Identification (Some components may appear different than shown, depending on the model.) Discharge Chute Discharge Angle Transmission Control Drift Cutters Augers/Impeller Gear box Adjustable Skid Shoe...

8 30SS, 36SS, 45SS Rev: 12/21/2011 Missing Parts Request Form Name Phone Email Address IMPORTANT: Please include your receipt. Without a receipt, your order will be delayed. You may also email us at: [email protected] Fax:1-919-550-3277 If emailing, please scan in your proof of pur...

9 30SS, 36SS, 45SS Rev: 12/21/2011 Assembly Instructions Step 1: Control Panel Handles 1. Align the two holes on each side of the control panel handles over the lower handle frame. 2. Insert the bolts through the handlebar holes and frame holes. Secure in place with hardware provided. Insert bolts f...

10 30SS, 36SS, 45SS Rev: 12/21/2011 1. Locate the connection: The chute rotation cable connection is located at the base of the discharge chute between the engine and the discharge 2. Slide the threaded end of the connector down the cable in order to easily see the end of the cable connection. The c...

12 30SS, 36SS, 45SS Rev: 12/21/2011 Assembly Instructions Step 6: Drive Control 1. Locate the thin cable on the right side (standing from the operator position) of the snow blower. 2. Attach the cable to the threaded end under the drive control handle. The cable extension may need to be attached to ...

13 30SS, 36SS, 45SS Rev: 12/21/2011 Step 9: Skid Shoes 1. Skid shoes are stored in the hardware bag for shipping. 2. Remove from hardware bag, and install skid shoes using the provided fasteners 3. Insert the fasteners so the flat head of the carriage bolt is on the outside of the main housing. CAUT...

14 30SS, 36SS, 45SS Rev: 12/21/2011 Starting the Engine DANGER: Exhaust contains poisonous carbon monoxide, a colorless and odorless gas. Breathing exhaust can cause loss of consciousness and may lead to death. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can c...

15 30SS, 36SS, 45SS Rev: 12/21/2011 Operating Instructions Transmission Control Your snow blower is equipped with an easily adjustable transmission control, which can be adjusted for forward and reverse speed. There are six forward and two reverse speeds. To change the speed, pull the handle out to ...

16 30SS, 36SS, 45SS Rev: 12/21/2011 Operating Instructions Chute Direction Control To rotate the chute to the right rotate the chute control clockwise. To rotate the chute to the left rotate the chute control counter-clockwise. Headlights To turn on the lights, flip the switch up. To turn off the li...

17 30SS, 36SS, 45SS Rev: 12/21/2011 Operating Instructions Using your STANLEY Snow Blower The following tips will help ensure proper and long lasting use of your STANLEY snow blower. ALWAYS wear proper safety equipment when operating the snow-blower, and make sure you dress appropriately for cold we...

18 30SS, 36SS, 45SS Rev: 12/21/2011 General Maintenance The Importance of Maintenance Regular maintenance is essential to ensure your snow blower continues to deliver safe and high-quality performance. To help you properly care for your snow blower, the following pages include a recommended maintena...

19 30SS, 36SS, 45SS Rev: 12/21/2011 Item Procedure Time Interval Break-in (first 5 hrs) Every 8 hrs (daily) Every 40 hrs (weekly) Every 100 hrs (Bi-weekly) Every 200 hrs (monthly) Belts Inspect Tension(adjust if needed) X X Augers/Impeller Inspect X Engine Air Filter Inspect X Engine Oil Check X Cha...

20 30SS, 36SS, 45SS Rev: 12/21/2011 Service Adjustments Adjusting Drive Cable If tension seems to be too loose or too tight, the drive cables needs to be readjusted. 1. Loosen the bolt above where the cable screws in to the right side of the control panel. 2. Loosening the bolt enables the cable to ...

21 30SS, 36SS, 45SS Rev: 12/21/2011 Check & Replacing the Transmission Drive Belt If belt needs to be changed or altered for any reason, the belt is located in the front of the snow blower behind the discharge chute and in front of the wheels. 1. Remove the cover that is protecting the snow blow...

22 30SS, 36SS, 45SS Rev: 12/21/2011 Adjusting Discharge Deflector The discharge chute is preset at the factory, but may require adjustment over time or during maintenance. For adjustments, follow the procedure below: 1. Loosen the two nuts at the chute cable mount on the discharge chute. 2. To make ...

23 30SS, 36SS, 45SS Rev: 12/21/2011 Storage Instructions Short Term Storage x Let engine cool before storing and do not store near flame, high heat, and possible ignitions from sparks. x Always clean off all flammable material as well as grime and dirt before storage. x Wash with mild detergent and ...

24 30SS, 36SS, 45SS Rev: 12/21/2011 Troubleshooting Problem Possible Causes Solution Engine will not start 1. Key in the OFF position 2. Insufficient fuel in the tank 3. Air bubble in the fuel line 4. Fuel valve in OFF position 5. Choke not ON 6. Choke linkage out of adjustment 7. Loose spark plug w...

26 30SS, 36SS, 45SS Rev: 12/21/2011 Replacement Parts To order replacement parts, visit our web-site at www.serviceandwarrantyonline.com Or dial Toll Free 1-800-393-0668 Monday-Friday 8AM-5PM OEM Replacement Parts B08911 : Auger/Impeller V-Belts (Belt Spec: MXV4-370) B01110: Transmission (Drive) Bel...

27 30SS, 36SS, 45SS Rev: 12/21/2011 Collector Housing Assembly Reference Parts Diagram Drawing # Part# Descpription 1 B00610 Discharge Chute Assembly—Black 2 B00810 Discharge Chute Deflector—Black 3 B01010 Drift Cutters—Black (Set of 2) 4 B01410 Auger/Impeller Gearbox 5 B01510 Discharge Chute Rotati...

28 30SS, 36SS, 45SS Rev: 12/21/2011 Drawing # Item # Description Drawing # Part # Description 1 B00110 Snow blower Wheel/Tire Assembly 13 B03511 Chute Direction Control Handle 2 B01110 Transmission Belt (toothed belt) 14 B03811 Discharge Chute Angle Lever 3 B01310 Plastic Belt Guard with Hardware 15...

29 30SS, 36SS, 45SS Rev: 12/21/2011 Limited Warranty & Service Length of Warranty: *(from the date of original retail purchase) Noncommercial/Nonrental Commercial Rental Engine Manufacturer’s warranty Manufacturer’s warranty Manufacturer’s warranty Transmission Manufacturer’s warranty Manufactur...