Spirit CT 800 - Manuals

CT800 -4- WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large motor, the GFCI will trip often. Route the power cord away from anymoving part of the treadmill including the elevation mechanism and transport wheels. NEVER remov...

CT800 -5- NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desiredspeed on the computer console and release the adjustment key...

CT800 -6- Assembly Pack Check List Step2 Step3 Step1 #58 - 3/8"Split Washer (6 pcs) #59 - 3/8"Flat Washer (6 pcs) #108 3/8 x 3-3/4Button Head Socket Bolt (6 pcs) #77 M5 x 12mmSelf Tapping Screw (4 pcs) #111 - M5 x 10mmMachine Screw (2 pcs) #112 - M5 x 16mmSheet Metal Screw (1 pcs) #113 - M5 ...

CT800 -7- Step 1: Upright Tubes • The right side upright tube (19) has the computer cable (A) pre-installed. Lift the tube off thewalking surface and attach it to the base frame. You need to gently pull on the computercable as you line up the upright tube, taking the slack out, so the cable does not...

CT800 -8- Step 2: Console Assembly • Connect together the mating computer cables (A & C), hand pulse cables (D & F, right and B& E, Left) and attach the ground cable (H) to the hole (I) in the steel frame with a M5 x 16mmscrew (112). • Mount the console (36) to the handle bar frame (5) w...

CT800 -9- Step 3: Console Assembly to Upright Tubes • Attach the two interface mounts (3 left & 4 right) to the console assembly frame with six M8 x12mm screws (110). • Connect the console computer cable (C) to the mating cable (A) from the upright tube. • Attach the console assembly to the top ...

CT800 -10- Getting familiar with the control panel CT800 Console Getting Started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switchlocated at the front of the treadmill below the motor hood. Ensure that the safety key is installed,as the treadmill w...

CT800 -11- Quick-Start Operation: • Press and release any key to wake display up if not already on. • Press and release the Start key to begin belt movement at 0.5 mph, then adjust to the desired speed using the Fast / Slow keys. You may also use the rapid speed keys 2 through 6 to set to a specific...

CT800 -12- Next to the Dot Matrix window are three LED lights labeled: Track, Speed and Incline, along with adisplay button. When the Track LED is lit the dot matrix displays the Track profile, when the SpeedLED is lit the Dot matrix displays the Speed profile and when the Incline LED is lit the Dot...

CT800 -13- To Select and Start a Preset Program: • Select a program then press the enter key to begin customizing the program with yourpersonal data, or just press the start key to begin the program with the default settings. • After selecting a program and pressing enter to set your personal data, ...

CT800 -17- The old motto, no pain, no gain , is a myth that has been overpowered by the benefits of exercising comfortably. A great deal of this success has been promoted by the use of heart ratemonitors. With the proper use of a heart rate monitor, many people find that their choice of exerciseinte...

CT800 -18- How to wear your wireless chest strap transmitter:1. Attach the transmitter to the elastic strap using the locking parts.2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.3. Position the transmitter with the SPIRIT logo centered in the ...

CT800 -19- How the Heart Rate Control Program Works: Heart Rate Control (HRC) uses your treadmill's incline system to adjust your heart rate. Increases anddecreases in elevation affect heart rate much more efficiently than changes in speed alone. The HRCprogram automatically changes elevation gradua...

CT800 -20- Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel towipe the edge of the belt and the area between the belt edge and frame. Also reach as far aspractical dire...

CT800 -22- Before contacting your dealer for aid, please review the following information. It may save youboth time and expense. This list includes common problems that may not be covered under thetreadmill s warranty. PROBLEM SOLUTION/CAUSE Display does not light 1) Tether cord not in position. 2) ...

CT800 -24- Effective July 15, 2009 TREADMILL LIMITED WARRANTY Spirit Fitness Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original f...