Samsung SHR-4080P - Manuals

v Chapter 5 Menu Setup Before Use 1. System 2. Camera 3. Monitoring 4. Record Mode 5. Event Record 6. Record Schedule 7. Backup 8. Network Chapter 6 PTZ Device Control 1. PTZ Control MODE 2. Basic Operation of PAN, TILT, & ZOOM 3. PRESET Setup 4. CAMERA MENU Setup 5. PRESET VIEW 6. Other VIEWs C...

vi Chapter 9 Back up 1. Backup Start 2. Backup Stop 3. Backup Play Chapter 10 PC Viewer 1. Introduction 2. Feature 3. Recommended PC Specification 4. Installation 5. Program Execution 6. Initial Screen 7. Monitoring Mode 8. Search Mode 9. Setup Mode Appendix 1. Product Specification 2. HDD Specifica...

1 Introduction 1-1 The realTime Digital Video Recorder(DVR) compresses the camera input data from 8channels into a MPEG4 video file and the voice input data into a G.726 audio filerespectively to record them in the Hard Disk or retrieve them from the Hard Disksimultaneously.In addition, it transmits...

2 Features 1-2 ■ 8 CH Composite Input Connectors ■ PAL Video Source Compatible ■ Able to record the normal sized (720 x 288) video image at the speed of 200IPS(image per second) ■ 8 CH Loop Through Video Connectors ■ Hard Disk Overwrite Mode ■ Large Quantity Hard Disk Backup by IEEE1394 ■ Able to re...

SHR-4080P USER’S MANUAL 3 Part Names and Functions 1-3 No Name Function Channel Button Play Back Channel Button Power LED Network LED Back Up LED HDD Access LED Split Screen Selection Button Mode Selection Button REC Button Display Mode Search Audio Setup Button Displays power on/off condition. Disp...

1 Installation Environment Setup 2-1 Do not play DVR on the carpet or other soft material to prevent clogging of the airventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condi-tion. You shall pay attention to the following before you use the product. 1. Do not use it o...

2 Checking Product & Accessory 2-2 Upon delivery of a product, you shall unwrap the product and put it on the even floor or where you want to use it. Then you shall check if the following items are in it. ■ Main Body ■ User’s Manual ■ One Power Cord ■ Two Brackets - Brackets are used to attach t...

SHR-4080P USER’S MANUAL 3 HDD Addition 2-3 You may add up to 3 more HDDs to the product. However, since the product contains has many parts which may incur electric shock, accident, or product breakdown and improper installation or setup may disturb HDD recognition or normal product operation, you s...

SHR-4080P USER’S MANUAL 2-7 8. Check the connector, wiring, and cable fixing condition inside the product and close the cover. 9. Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side) ✻ You can apply 2 HDDs to each BRACKET-HDD as shown in the figure. Attention Attention ...

2 Connecting SCSI Device 3-2 ● The SCSI interface of SHR-4080P is used for backup or extended storage. Connect an armored SCSI hard disk drive cable to the high-density 50-pin femaleUltra SCSI port. SCSI device ID adopts 0 through 5 with 6 connections at most. Caution Caution Never connect or discon...

SHR-4080P USER’S MANUAL 3 Connecting Network 3-3 ● Connecting to Internet through Ethernet(10/100BaseT) ● Connecting Internet through ADSL

4 Connecting IEEE1394 Device 3-4 ● Connect the IEEE1394 hard disk through the back port of SHR-4080P. ● You can connect up to 6 IEEE1394 armored hard disks by the Daisy-Chainmethod. ● After connection, Menu - System - HDD Setup is necessary for recognition andsetup for use. ● It acts as HOT PLUG to ...

5 Connecting Alarm Input/Output 3-6 The Alarm IN/OUT port in the back of SHR-4080P is composed of the followingelements. ● ALARM IN/OUT Connection Name Function - ALARM IN1- ALARM IN2- ALARM IN3 1 - ALARM IN4 ALARM Input Port - ALARM IN5- ALARM IN6- ALARM IN7- ALARM IN8- ALARM RESET IN On receiving ...

6 Connecting RS-485 Device 3-8 ● Connect RS-485 Device through the back port of SHR-4080P. ● You can install and control the PTZ camera supporting RS-485 communication. ● You can adopt either Half Duplex or Full Duplex method for the connection. ● Baud Rate covers 600, 1200, 2400, 4800, 9600, 19200,...

1 System Motion 4-1 SHR-4080P USER’S MANUAL ● Turn the power on and the following LOGO screen pops up. ● After the LOGO screen appears, the button in front of SHR-4080P blinks 6 timesto initialize the system for operation. ● Upon completion of normal initialization, the Live screen appears accompany...

2 Livescreen Mode 4-2 Definition of Live Screen Icon The Live screen icons of SHR-4080P display the current setup and function status ofeach screen. PTZ N CAM_01 CAM_01 V.Loss : Recording Icon Each icon represents Normal / Panic / Event(Alarm+Motion) / Schedule Recording. : Recording Video Size Icon...

SHR-4080P USER’S MANUAL 4-3 Definition of Live Screen Mode SHR-4080P receives 8 live images and displays them in the following 8 modes. ● Full Screen(Single) Mode: Displays the selected channel in a full screen. Then, the channel LED concernedwill be turned on. ● 4, 6, 7, & 8 Split Mode: Four, s...

4-4 Selecting Live Screen Mode Each mode may be selected by [MODE Button] and [CH1 ~ CH8 Button]. The follow-ing figure shows Live Mode of SHR-4080P after converted. ● The default is 9 Split Screen Mode. ● The default of 4 Split Screen Mode is [4 Split 1] Mode to display [CH1 ~ CH4] or [4Split 2] Mo...

3 Live Channel Selection and Audio On/Off Setup In other split modes than Full Screen Mode, 9 Split Mode, and Auto Sequence Mode,you may choose a channel to be displayed in each split area on your own. Meanwhile,the channel whose MENU is set to Audio On can set up Audio On/Off in all Live Modes. Aud...

4-6 4 Freeze and Zoom Freeze Function Freeze pauses the video image in Live Screen, only available in Live Mode. You can setup Freeze On/Off with [FREEZE Button] and [FREEZE LED] is turned on or off depend-ing on the Freeze On/Off setup condition. Zoom Function Zoom enlarges the selected area twice,...

5 Event Monitoring Event Monitoring displays the channel synchronized with a specific event(Sensor/Motion/Video Loss) on the screen when it occurs. Event Monitoring On/Offand Event Duration setup is available in [Menu] ➝ [Monitoring]. If you set the Event Monitoring interval to 5 seconds and an even...

1 System 5-2 ● System Menu has the following items in detail. ● Date Press the “Enter” key and the ➛ or ❿ key to move to Y/M/D. Use the or ❷ key to change the date. Press the “Enter” key to come out of the mode. ● Time Press the “Enter” key and the ➛ or ❿ key to move to H/M/S. Use the or ❷ key to ch...

5-4 Password ● The Default Password is 4321. ● New Password This is used to change the system password inside SHR-4080P. You are allowedto create a password up to 8 digits. Press the “Enter” key and then a channel but-ton from 0 ~ 9 on your left to finish input. If you press the “Enter” key after ch...

5-6 ● System Log List Event Log ● Checks the record regarding Event like Alarm / Motion / Video Loss ● This displays the contents of a log regarding Event its execution date/time. ● First : Returns to the first Log page. ● Prev : Back to the previous Log page. ● Next : Forwards to the next Log page....

SHR-4080P USER’S MANUAL 5-7 System Information and Setup ● Software Version : Displays the current version. Setup is not available. ● Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not avail- able. ● Mac Address : 6 Byte hardware address. Setup is not available. ● HDD Erase This...

5-8 HDD Setup Internal ● HDD Information Displays the number, quantity, and status of ATA, IEEE1394, and SCSI. Setup isnot available.Status : Internal HDD, External HDD, Backup HDD ● External HDD Setup 1. Backup/External You are able to determine the usage of IEEE1394 and SCSI.Not Defined ➝ When the...

SHR-4080P USER’S MANUAL 5-9 2. Hot Plug - Connect/Disconnect You may connect or disconnect IEEE1394 Hard Disk while power is supplied to the SHR-4080P main body. ① As for connecting, connect IEEE1394 Hard Disk with the SHR-4080P main body and press “Connect”. Pressing “Connect” makes the SHR-4080P m...

5-10 Remote control Device MENU for Samsung Integrated Remote Control(SSC-2000) Remote Control Device ID Baudrate Device Samsung System Keybord Parity Date Stop Duplex 03 4800 None 8 1 Half Duplex ● Device A Remote Control Device, being connected to the RS485 port. ● ID Unique ID of SHR-4080PThis un...

SHR-4080P USER’S MANUAL 5-11 System Shutdown ● Terminates the work in action safely and turns the power off. Press “OK” in theconfirmation window and plug out when you see “Safe to Power Off”. Remote Control Device Caution Caution [System Shutdown]Power-off without terminating the system in the Syst...

5-12 2 Camera ● The detailed Camera Menu items are as follows. ● VideoOn : Camera images from a selected channel appear.Off : Camera images from a selected channel disappear. In this case, you are not allowed to set Audio/Title/Auto Seq. ● AudioOn : You can hear voices from a selected channel.Off : ...

5-14 PTZ Device ● ID PTZ Camera ID from 0 to 255 ● Protocol A protocol supported by PTZ Camera The following protocols are now being supported. Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/ Kalatel ● Baudrate Baudrate supported by PTZ Camera, 600/ 1200/ 2400/ 4800/ 960...

Screen Setup SHR-4080P USER’S MANUAL 5-15 ● This is a window to adjust Brightness/Contrast/Color for the camera image of each channel. Put the cursor on the channel that you want to adjust and set up Brightness/Contrast/Color. Once selected, the channel appear in the PIP area on the right. Press the...

5-16 3 Monitoring ● Event Monitoring You are able to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous. ① Off : Event Monitoring does not operate to turn to the screen where an event occurs. ➁ 3sec/ 5sec/ 10sec/ 20sec/ 30sec : For the period, the screen is seen before the next screen appears. ➂ Cont...

5-18 4 Record Mode If you press the front “REC” key, the mode to be recorded will be determined. ☛ For Event Recording Mode value setup, refer to 5-18. Event Record Mode Setup Menu. ● Mode On : Pressing the REC key starts recording the current channel.Off : Even pressing the REC key does not affect ...

5 Event Mode ● The detailed items of Event Record Menu are as follows. Evnet Record Mode Determines a mode to be recorded when an event occurs. ● V. Size (Video Size ) Determines the size of a screen to be recorded. Full D1 : 720x576 (L) ➝ Large Half D1 : 720x288 (N) ➝ Normal CIF : 352x288 (S) ➝ Sma...

5-22 Motion Detecting ● M.D State Off : Motion Detection does not operate On : Motion Detection starts operation. ● Area Select the Motion Detection zone. It is composed of 45x48 sized Block. You are forbidden to determine 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitor...

● Sensitivity Determines Motion sensing sensitivity. Sensitivity grade consists of Low ➝ Medium ➝ Very High in the ascending order. ● Alarm-Out Selects Alarm-Out scope when Motion occurs. At this moment, this supports 5 Alarm Outs. Choose an alarm-out that you want to synchronize with the current mo...

5-24 6 Record Schedule You may select a time when recording starts automatically.Selection by the day or by the time is available.The default is set to “None”. ● Pressing “CH > “ copies the value of Channel 1 to all the channels. ● The horizontal axis numbered from 0 to 23 represents the time val...

5-26 7 Backup ● Sel Tap is not checked in the beginning. Once checked, Sel Tap activates “Start” and free space is displayed in the Free Space zone. ● Set the date and time that you want to back up and press “Start” to start Backup. When you change Start Date/Time or End Date/Time, free space keeps ...

8 Network ● Connection Mode Designates the kind of the network connected to the main body of SHR-4080P.Static IP : When the main body is connected to the network with Static IP.Dynamic IP : When the main body is connected to the network with Dynamic IP supplied by DHCP. ADSL(PPPoE) : When the main b...

1 PTZ Camera Control Mode 6-1 ● Select a proper PTZ Device Configuration value in MENU to enter PTZ Control Mode. ● Selected in MENU, the symbol( ) of PTZ is displayed on the channel in thescreen. ● If you press the Enter( ) button among direction keys in front of Split Screen,a blue bar will appear...

3 PRESET Setup 6-4 ● Records a certain position of PTZ Camera. ● Memorizes up to 20 PTZ Camera positions at the moment. ● Press the SET button in front of SHR-4080P in Single Screen PTZ Camera ControlMode to set up Preset. ● After PRESET setup, press ENTER. PTZ TELE WIDE VIEW PRESET Note Note For AD...

4 Camera Menu Setup 6-6 ● Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up sever-al conditions of PTZ Camera. ● Press the SET button in front of SHR-4080P in Single Screen PTZ Camera ControlMode to select Camera Menu. ● Press the SET button in front of SHR-4080P to return to th...

SHR-4080P USER’S MANUAL 5 Preset View 6-7 ● Preset setup allows your movement to a certain saved position of PTZ Camera. ● Press the VIEW button in front of SHR-4080P in Single Screen PTZ CameraControl Mode to select Preset. ● Control the cursor until it reaches a Preset position number that you wan...

6 Other View 6-8 ● Press the VIEW button in front of SHR-4080P in Single Screen PTZ CameraControl Mode to supply PTZ Camera. This is a very special function. ● After you select a function, press Enter. Then the function will be checked andstart running. ● If you select other function while this func...

4 Event Recording 7-4 ● Alarm Sensor State in Event Record Alarm of MENU shall be set to N.O (Normal Open)or N.C (Normal Close) ● Motion Detection M.D State in Event Record Motion Detection of MENU shall be set to On. ● Video Loss Video Loss State in Event Record Video Loss of MENU shall be set to O...

1 Calendar Search 8-2 ● Be sure to designate both the channel and the date first. Then press “Start” to initi-ate search. ● Uses a calendar to search video files at the preset time. Four channels as a maxi-mum are in the range of search. ● Use the key and ➛ , ❿ key to select up to 4 channels. Then a...

SHR-4080P USER’S MANUAL 8-3 ● Searches Normal Recording, Panic Recording, Sched.(Schedule) Recording,Alarm Recording, Motion Recording, and VLoss(Video Loss) Recording by thetime. ● You shall select a channel to search to see the Event information of the channel. ● On the basis of the Event informat...

SHR-4080P USER’S MANUAL 8-5 ● Searches the oldest one among recorded video files. Up to 4 channels can besearched at once. ● After you select a channel with the , ❷ , key, the checkbox on the right of the selected channel number will be checked. ● If you want to start search, use the ❷ key until you...

5 Go to Last Search 8-6 ● Searches the latest one among recorded video files. Up to 4 channels can besearched at once. ● After you select a channel with the , ❷ , key, the checkbox on the right of the selected channel number will be checked. ● If you want to start search, use the ❷ key until you rea...

SHR-4080P USER’S MANUAL 6 Backup Data Search 8-7 ● Searches a video file for the preset time making use of the Day/Time informationamong recorded video files. Up to 4 channels can be searched at once. ● After you select a channel with the , ❷ , key, the checkbox on the right of the selected channel ...

Note Note - Pressing the PLAY button( ) does not affect play as far as the user stays inMENU. Be sure to escape from MENU to start play. ● Press the STOP button( ) to stop play. If you press the Playback/PAUSEbutton( ), recording will resume from the point where the previous recordingstops. When the...

1 Backup Start 9-1 ● To proceed with Backup, an armored HDD(IEEE1394 HDD,SCSI) shall be con-nected for backup purpose. ① Input the time when Backup will start and end in MENU. ➁ When the file size to be backed up exceeds that of the armored HDD, Backupdoes not start. ➂ Pressing START begins backing ...

2 Backup STOP 9-2 ● If you select Stop during Backup process, Backup will stop immediately. ① As soon as Backup stops or ends, Backup LED in front of SHR-4080P lights out. ➁ If you change the time of the system or shuts down it, Backup in progress willstop.

SHR-4080P USER’S MANUAL 3 Backup Play 9-3 ● Press the SEARCH button in front of SHR-4080P and select Backup Search toplay the backup data. ● Select a channel and time and press Start to play a data. Note Note Backup is not available during BackupRefer to 8-7 Backup Search of User’s Manual.

2 Feature 10-2 ● Thanks to the transmission of video data compressed by the MPEG-4 VideoCompression method, this plays video images of good quality. ● Thanks to the G.726 Voice Compression method, this supplies voice data of goodquality. Use of armored MIC improves the quality of remote voice. ● Tha...

4 Smart Viewer Installation 10-4 10-4-1 Smart Viewer Installation ● Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer” folder in CD. ● Smart Viewer supports Win98se/ME/2000/XP OS. Win98se/ME users andWin2000/XP users shall make use of the setup file in the “Win98_ME” folder andthe “...

SHR-4080P USER’S MANUAL 5 Smart Viewer Program Execution 10-11 ● Double-click the Smart Viewer icon in the background screen to run the program.

6 Smart Viewer Initial Screen 10-12 ● Screen Description ! Pressing this button enters Search Mode in which you can search and play the video data recorded both in Monitoring Mode for real-time video data monitoring and in SHR-4080P. @ This button terminates or minimizes the program. # It displays t...

SHR-4080P USER’S MANUAL 7 Monitoring Mode 10-13 ● DVR(SHR-4080P)/SITE Connection- Select the name of DVR(SHR-4080P) or site for connection and click the connec- tion button. Connection Failure Cases 1. Password Certification Failure - In case of discord between the Network password set to SHR-4080P ...

SHR-4080P USER’S MANUAL 8 Search Mode 10-25 ● Description of Search Mode Initial Screen- Search Mode is divided into Remote Mode for SHR-4080P image search/play and Local Mode to play *.dvr file saved in the directory designated by your PC. ! Pressing this button enters Search Mode for the remote co...

9 SETUP MODE 10-32 ● Description of Initial Screen ! This button is used to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Version setup. @ Shows what the selected Setup item can set up in detail. # This button terminates the Setup window. $ This button saves the information revised i...

10-34 DVR Setup - Click the [DVR Setup] button for DVR Setup.- You can change the setup items of SHR-4080P Menu, being connected with Smart Viewer remotely. - DVR Setup is composed of 5 items, System, Camera/Audio, Monitoring, Recording, and Network. Note Note - DVR setup Where SHR-4080P that you wi...

SHR-4080P USER’S MANUAL 10-45 Note Note - SHR-4080P uses 4 PORTs for TCP connection.- A PORT number is flexible and 4 numbers in a row will be changed in all. (554,555,556,557 --> 558,559,560,561) - You shall allocate the above ports for SHR-4080P if you want to compose a net- work by IP Router. ...

10-48 ● Auto Connection - Determines if Smart Viewer shall be automatically connected to SHR-4080P or Site as soon as it starts running. - If you check “Auto Connection On”, the name of SHR-4080P and Sites that are currently registered in DVR/Site List will be listed as follows and if you select one...

1 Product Specification 11-1 SHR-4080P USER’S MANUAL Item Specification Remark CPU 32bit RISC CPU Memory SDRAM : 64MByte Flash : 8MByte Operation System Embedded OS Broadcasting PAL System Input Voltage AC 100-230V, 50/60Hz Power Comsumption 85 Watt Max Composite 8 Channel - 1.0Vp-p - 75 Ω Hi Z Term...

2 HDD Specifications 11-4 Maker RPM Capactity Interface Model No 36.7 GB ST336607LC Seagate 10,000 73.4 GB Ultra320 SCSI ST373307LC 146.8 GB ST3146807LC ● SCSI I/F External HDD ● Internal ATA HDD/IEEE1394 I/F External HDD Maker RPM Capactity Interface Model No 120 GB Ultra ATA-133 SV1203N Samsung 5,...

4 Factory Default 11-6 This restores the Network information and preset values in SHR-4080P to the original state at the time of factory shipment. Factory Default will be done if you; - Use System / Load Factory Default in MENU or, - If you hold on to the Mode button in Live Mode and keep pressing t...