Page 2 - Use this camera in the following order; Set up the camera driver; Open Window
《 1 》 Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Before connecting the camera to a PC, viathe USB cable, you will need to set up thecamera driver. Insta...
Page 3 - There is the possibility of injury from the camera’s moving parts.
《 2 》 DANGER WARNING WARNING indicates a potentially hazardous situation which, if not avoided, couldresult in death or serious injury. ■ Do not use the flash in close proximity to people or animals. Positioning the flashtoo close to your subject’s eyes may cause eyesight damage. ■ For safety reason...
Page 4 - READY; Wise Shot; RECORDING
《 3 》 CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury. ■ Leaking, overheating, or burst battery could result in fire or injury. • Use battery with the correct specification for the camera. • Do not short circuit, heat or dispose of b...
Page 5 - Contents; SOFTWARE
《 4 》 Contents ■ Initialisation ……………………… 62 ● Setting up the Mycam menu …… 62 ● Start up image …………………… 63 ● Start up sound …………………… 63 ● Shutter sound …………………… 63 ● MP3 / PMP / TEXT VIEWER mode ……………………………… 63 ● Downloading files ………………… 63 ● Starting the MP3 / PMP /TEXTVIEWER mode …………………… 64 ● L...
Page 6 - System chart
《 5 》 System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact yournearest Samsung dealer or Samsung service centre. Software CD (see p.79) Camera strap User manual, Product war...
Page 7 - Identification of features
《 6 》 Identification of features Front & Top Power button Shutter button Camera strap Mode dial Self-timer lamp / Auto Focus lamp Speaker Optical 3X zoom lens/ Lens cover Flash Microphone Speaker
Page 10 - For 2 seconds the lamp blinks quickly at 0.25-second intervals.
Icon Status Description 《 9 》 Identification of features ■ Self-timer lamp ■ Mode icon : Refer to page 16 for more information about the camera mode setting. ■ Camera Status Lamp - - SCENE MODE MODE MODE Connecting to a Power Source ■ You should use the rechargeable battery (SLB-0837) supplied with ...
Page 11 - Connecting to a Power Source; INFORMATION; used as a power cable.; CAUTION
《 10 》 Connecting to a Power Source ※ These figures are measured under Samsung’s standard conditions and shootingconditions and may vary depending on the user's methods. Using the fully charged battery, Auto mode,7M image size, Fine image quality, Shot toshot interval : 30Sec.Changing the zoom posit...
Page 13 - Low battery capacity
《 12 》 Instructions on how to use the memory card ● Be sure to format the memory card (see p.59) if you are using a newlypurchased memory for the first time, if it contains data that the camera cannotrecognise, or if it contains images captured with a different camera. ● Turn off the camera power wh...
Page 14 - Instructions on how to use the memory card; Samsung cannot be held responsible for lost data.; The recording times can be changed by the zoom operation.
《 13 》 Instructions on how to use the memory card ● Samsung cannot be held responsible for lost data. ● It is advisable to copy important data onto other media as back-up e.g. floppydisks, hard disks, CD etc. ● If there is insufficient memory available : A [Memory Full!] message will appear and the ...
Page 15 - When Using the Camera for the First Time
《 14 》 When Using the Camera for the First Time ■ When the camera is turned on for the first time, a menu will be displayed to setdate, time and language in the LCD monitor. This menu will not be displayedagain after setting up the date, time and language. Set up the date, time andlanguage before us...
Page 16 - LCD monitor indicator; RGB; Remaining time
No. Description Icons Page 1 p.9 2 p.12 3 p.37/17 4 p.24 5 p.26 6 p.23 7 p.37 《 15 》 LCD monitor indicator ■ The LCD monitor displays information about the shooting functions andselections. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑬ ⑫ ⑭ ⑮ ⑰ ⑯ ⑱ ⑲ ⑩ ⑨ ⑪ ⑳ [Image & Full Status] No. Description Icons Page 8 - 9 - 10 p.20 1...
Page 17 - Starting the recording mode; Press the shutter button to capture an image.
《 16 》 Starting the recording mode ■ How to use the AUTO mode ( )Please select this mode for quick and easy picture taking with minimal userinteraction. ● If the auto focus frame turns to red when you press the shutter button downhalf way, it means that the camera cannot focus on the subject. Should...
Page 25 - Focus lock
《 24 》 Focus lock ■ To focus on a subject not positioned in the centre of the picture, use the focuslock function. ● Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera ...
Page 28 - Available camera mode
《 27 》 MENU/ OK button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to theinitial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE m...
Page 35 - Movie Clip frame stabiliser
《 34 》 1. Press the E button in the Movie clip mode and select the menu. 2. Select a desired sub menu by pressing the Up/ Down button and press the OK button. : Movie clip frame stabilizer function is disabled.: Reduces camera shake during movie recording. The recording frame range will become narro...
Page 36 - OSD
《 35 》 How to use the menu ■ You can use the menu on the LCD monitor to set up recording functions. ■ The items indicated by are default settings. ※ Menus are subject to change without prior notice. ※ When the image size (Movie clip) is 720X480, the default of the frame rate is 20 fps. Using the LCD...
Page 37 - You can select the image size appropriate for your application.
《 36 》 QUALITY Super Fine Fine Normal Quality/ Frame rate ● This file format complies with the DCF(Design rule for Camera File system). INFORMATION ■ You can select the compression ratio appropriate for your application of thecaptured images. The higher the compression ratio, the lower the picture q...
Page 38 - Metering; - Multi : Exposure will be calculated based on an; Continuous shot; : Take one picture only
《 37 》 METERING Multi Spot Metering ● If the subject is not the centre of the focus area, do not use the spotmetering as this may result in an exposure error. In this circumstance, It isbetter to use exposure compensation. INFORMATION ■ If you cannot obtain suitable exposure conditions, you can chan...
Page 39 - Sharpness; Auto Focus type
《 38 》 Sharpness ■ You can adjust the sharpness of the picture you areabout to take. You cannot check the sharpnesseffect on the LCD monitor before you take a picture,because this function is applied only when thecaptured image is stored on the memory. SHARPNESS Soft Normal Vivid - Soft : The edges ...
Page 41 - Starting play mode; Select an image that you want to view by
《 40 》 Trim:T Capture:E Play: ▶ / Capture:E Starting play mode ■ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ■ If the memory card is inserted in the camera, all the camera functions apply onlyto the memor...
Page 46 - - If the menu is displayed; : While the menu is showing, the LEFT button operates as a
《 45 》 Play & Pause ( )/ Down button ■ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or tomove down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie c...
Page 48 - Setting up the play back function using the LCD monitor
《 47 》 Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In thePLAY mode, pressing the MENU button displays the menu on the LCDmonitor. The menus you can set up in Play mode are as follows. To capturean image after setting up the p...
Page 49 - Starting the slide show
《 48 》 Starting the slide show ■ Images can be displayed continuously at pre-set intervals. You can view theslide show by connecting the camera to an external monitor. 1. Select the [Show] sub menu by pressing the UP/DOWN button and press the RIGHT button. 2. Use the Up/Down buttons to select the de...
Page 51 - Deleting images; VGA; Start Image
《 50 》 RESIZE Exit:MENU Move: 2 8 1 6 X 2 1 1 22 0 4 8 X 1 5 3 61 0 2 4 X 7 6 86 4 0 X 4 8 0S t a r t I m a g e Del:OK DELETE Select All Pics Exit:MENU Move: Del:OK Select:T Delete? Confirm : OK Yes No Deleting images ■ Of all the files stored in the memory card, the unprotected files in the DCIMsub...
Page 52 - Rotating an image; Select a desired sub menu by pressing the; DPOF
《 51 》 ROTATE Exit:MENU Move: Right 90°Left 90°180°HorizontalVertical Rotating an image ■ You can rotate the stored images by various degrees. Once the playback of therotated picture is finished, it will switch back to the original state. 2. Press the OK button and the rotated image will be displaye...
Page 54 - On Screen Display information
《 53 》 ISO : 100 Av : F3.5 Tv : 1/60 Flash : Off 3072x23042006/07/01 OSD INFORMATION Exit:MENU Move: Full BasicOSD Off On Screen Display information 1. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. ■ You can check shooting information about the displayed image. [...
Page 55 - PictBridge; Copy To Card
《 54 》 SET UP FormatDate&TimeImprintSound USB Back: ◀ Set:OK Computer Printer PictBridge ■ You can use the USB cable to connect this camera to a printer that supportsPictBridge (sold separately) and print the stored images directly. Movie clips andvoice files cannot be printed. ■ Connecting the ...
Page 56 - PictBridge : Picture Selection
《 55 》 PictBridge : Picture Selection Exit:Shutter Set:OK PREV ◀ ▶ NEXT Exit:Shutter Set:OK ■ You can select images you want to print ● Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Left and Right buttons to select the [IMAGES] menu. ...
Page 57 - PictBridge : Print Setting
《 56 》 PictBridge : Reset 1. Use the Up and Down buttons to select the [RESET] menu tab. And then press the Rightbutton. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OKbutton. If [Yes] is selected : All print and image settings will be reset.If [No] is sele...
Page 58 - min; Setup menu; PORTUGUÊS
《 57 》 Menu tab Main menu Sub menu Secondary menu Page ---- Computer - Printer - Off - On - Off - On - Dark - Normal - Bright - NTSC - PAL - Off/ 0.5, 1, 3sec - No - Yes - Menu tab Main menu Sub menu Secondary menu Page Series - Reset - 1, 3, 5, 10 min - No - Yes - 06/07/01 13:00 - yy/mm/dd - dd/mm/...
Page 59 - This function allows the user to select the file naming format.
《 58 》 Setup menu [ File name ] ■ This function allows the user to select the file naming format. [Series] : New files are named using numbers that follow the previous sequence, even when anew memory card is used, or afterformatting, or after deleting all pictures. [Reset] : After using the reset fu...
Page 60 - UP and DOWN buttons : Changes the setting value.
《 59 》 Setup menu [ Format ] ■ This is used for formatting the memory. If you run [Format] on the memory, allimages, including the protected images MP3, TEXT and PMP files will bedeleted.Be sure to download important images to your PC before formatting the memory. If [No] is selected : The memory ca...
Page 61 - : Select this if you want to connect the; You can turn the Auto Focus lamp on or off.
《 60 》 Setup menu [ Sound ] ■ If you set the operation sound to on, various soundswill be activated for camera startup when buttonspressed, so that you can be aware of the cameraoperation status. ● [Sound] sub menu : Off/ Low/ Medium/ High SETUP LanguageFormatDate&TimeImprint Sound Back: ◀ Set:O...
Page 62 - You can adjust the LCD brightness.; Connecting to an external monitor
《 61 》 Setup menu [ LCD brightness ] ■ You can adjust the LCD brightness. SETUP SoundUSBAF SoundAF Lamp LCD Back: ◀ Set:OK Dark Normal Bright [ Selecting Video out type ] ■ The Movie output signal from the camera can beNTSC or PAL. Your choice of output will begoverned by the type of device (monitor...
Page 63 - Setting up the Mycam menu
《 62 》 Setting up the Mycam menu [ Quick view ] ■ If you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is possible only with still images. [Off] : The quick view function can’t be acti...
Page 64 - You can select the shutter sound.; Downloading files
《 63 》 Start up sound Start up image Shutter sound ■ You can select the image that is first displayed on theLCD monitor whenever the camera is turned on. ● Use a saved image for the start-up image with the[Start Image] in the [RESIZE] menu in the playmode. ● The start-up image will not be deleted by...
Page 65 - frame
《 64 》 Downloading files Starting the MP3/ PMP/ TEXT VIEWER mode Confirm : OK Resume Open ■ Insert the memory card that holds MP3, PMP and TEXT files. As this camera has a15MB internal memory, you can save the files on the internal memory too. 1. Select the MP3/PMP/TEXT VIEWER mode by rotating the m...
Page 66 - TEXT VIEWER; PMP
《 65 》 Starting the MP3/ PMP/ TEXT VIEWER mode [ TEXT VIEWER mode ] 001/001 TEXT.TXT 0:00:03/ 0:26:28 [ MP3 mode] [ PMP mode] 003/003 J-Heart - Misty.mp3waiting for you by J He misty by J Heart.MP3 Move: Select:OK 003/003 AnimationComic [SDC]-Movie sample.sdc MP3 misty by J He [SDC]-Movie sample.s W...
Page 67 - LCD monitor indicator for MP3/PMP/TEXT VIEWER mode
《 66 》 ■ The LCD monitor displays information about the MP3, multimedia and Text file. 0:00:03/ 0:26:28 MP3 mode Battery (p.12) Equalizer Playing time Time line Play & Pause/ Control button (p.67) Title of file [MP3 mode] Volume (p.67) Type of play back (p.70)Bit rate (p.65) PMP mode Battery (p....
Page 68 - Using the camera buttons to adjust the camera
《 67 》 Using the camera buttons to adjust the camera ■ You can control the volume with this button.There are 0~30 steps ■ When a file is playing back, press the Down button topause the file. Pressing it again will resume playback. ■ MP3 modeYou can search the MP3 files by pressing the Left/ Rightbut...
Page 70 - Setting up the playback function using the LCD monitor; Menu tab
《 69 》 Setting up the playback function using the LCD monitor ■ MP3/ PMP mode functions can be changed by using the LCD monitor.Press the MENU button and the menu will display on the LCD monitor. ※ Menus are subject to change without prior notice. Menu tab Main menu Sub menu Page p.70 p.70 MP3 Menu ...
Page 73 - Setting up the recording function in the MP3 mode.
《 72 》 Setting up the playback function using the LCD monitor ■ You can set the play back function display on the LCD. [ ] : If there is no operation during 5 seconds, Menu bar will disappear. [ ] : Menu bar will not display on the LCD monitor. [ ] : Menu bar will display on the LCD monitor. Display...
Page 74 - Important notes
《 73 》 Important notes Be sure to observe the following precautions! ■ This unit contains precision electronic components. Do not use or store this unit inthe following locations. - Areas exposed to severe changes in temperature and humidity.- Areas exposed to dust and dirt.- Areas exposed to direct...
Page 76 - Before contacting a service centre
《 75 》 The camera suddenly stops working while in use ㆍ The camera stopped due to a malfunction → Remove /re-insert battery and switch the camera on The images are unclear ㆍ A picture was taken of the subject without setting an appropriate macro mode → Select an appropriate macro mode to take a clea...
Page 78 - Shooting; V G A; Specification
《 77 》 ■ Storage - Media : Internal memory: About 15MB External memory(Optional) : MMC/SD card (Up to 1GB Guaranteed)*Internal memory capacity is subject to change without prior notice. - File Format : Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI(MPEG-4) Audio : WAV ...
Page 79 - III
《 78 》 Specification ■ Power Source : Rechargeable battery : SLB-0837 (860mAh) Adaptor : SAC-45, SUC-C2Cradle : SCC-NV3 (Optional) ※ Included battery type may vary depending on sales region. ■ Dimensions (WxHxD) : 94.5 x 57 x 17.5 mm ■ Weight : 142g (without battery and card) ■ Operating Temperature...
Page 80 - Copyrights for software are licensed only for use with a camera.; Digimax Converter; Digimax Converter : Multimedia converting program
《 79 》 Software Notes System Requirements About the software Please ensure that you read the software instructions carefully before use. · The attached software is a camera driver and image editing software tool for Windows. · Under no circumstances should all or part of either the software or the u...
Page 81 - You can visit the Samsung web-site through the internet.
《 80 》 About the software Setting up the application software 1. The auto run frame will display. Click the [Install] menu in the Auto run frame. ■ Digimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips clipwit...
Page 82 - Setting up the application software; Install the software by instructions on the monitor.
《 81 》 Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. 4. Install the software by instructions on the monitor. ※ The XviD codec is distributed according to and under the terms and conditions ofthe GNU General Publi...
Page 83 - Starting PC mode
《 82 》 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open andthe computer will recognize the camera. ※ If your OS is Windows XP, an image viewer program will open.If the download window of Digmax M...
Page 84 - Removable Disk
《 83 》 Starting PC mode [Using the USB cable with Cradle (optional) ] [Using the USB cable with Camera] ■ Connecting the camera to a PC ■ Disconnecting the camera and PC : Refer to page 84 (Removing the removable disk). ※ If you selected [Printer] in Step 4, when you connect the camera to your print...
Page 85 - Press the right mouse button and a pop-up menu; Removing the removable disk; Check whether the camera and PC are transferring a file.
《 84 》 Removable Disk 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. ● We recommend that you should copy the images to the PC to view them.Opening images directly from the removable disk may be subject tounexpec...
Page 86 - To uninstall the USB driver, refer to the process shown below.; Removing the USB Driver for Windows 98SE
《 85 》 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable diskmay be removed safely. 7. Unplug the USB cable. 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This...
Page 88 - Digimax Master
《 87 》 Digimax Converter ● If there is no font that is compatible with the script file on your PC, the scriptis shown as ' '. ● Transferring the converted file to a removable disk is time consuming. Itmay take a long time. The duration depends on the file size. ● Do not use the PMP mode while drivin...
Page 91 - FAQ
《 90 》 FAQ ■ Please check the following if the USB connection malfunctions. Case 1 The USB cable is not connected or you are using a cable with anincorrect specification. → Use a USB cable with the correct specification. Case 2 The camera is not recognized by your PC. Sometimes, the cameramay appear...
Page 93 - FCC notice; the receiver is connected.; Declaration of Conformity; Trade Name; Correct Disposal of This Product
《 92 》 FCC notice ■ ■ NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation.This equipment generat...
Samsung Digimax 200
Manual
Samsung GX-20
Manual
Samsung i100
Manual
Samsung i8
Manual
Samsung i85
Manual
Samsung L310W
Manual
Samsung NX11
User Manual
Samsung NX200
User Manual
Samsung SPF-71EW
User Manual
Samsung SPF-86H
Manual
Samsung ST66
User Manual
Samsung ST75
User Manual
Samsung WB350F
Manual
Samsung WB351F
Manual
Samsung WB352F
Manual
Samsung Gear 360 (2017)
User Manual
Samsung SM-C200
User Manual
Samsung ST500
Manual