Samsung HW-Q990B - Manuals

ENG - 6 01 CHECKING THE COMPONENTS SOUNDBAR Soundbar Main Unit Soundbar Remote Control / Batteries Subwoofer POWER x 2 x 4 A TYPE : 450mm Surround Speaker (Left / Right) Power Cord (Subwoofer, Surround Speaker, Soundbar) Wall Mount Guide x 2 x 2 (M4 x L10) x 2 Holder-Screw Screw Bracket-Wall Mount x...

ENG - 7 02 PRODUCT OVERVIEW Top Panel of the Soundbar 2 1 3 4 1 (Multi Function) Button • In standby mode, press the (Multi Function) button to turn on the Soundbar. • Press the (Multi Function) button to change the input source. 2 (Volume) Button Adjusts the volume. 3 (Mic On/Off) Button Press the ...

ENG - 8 03 USING THE SOUNDBAR REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover ba...

ENG - 11 Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TV’s remote control. • This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported. • Set the TV speaker to External Spe...

ENG - 12 04 CONNECTING THE SOUNDBAR Connecting the power and units Use the Power cord to connect the Subwoofer, Surround Speakers, and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attache...

ENG - 13 Recommended Speaker Layout 150° 150° 135° 135° 0° Subwoofer Soundbar Surround Speaker L Surround Speaker R CAUTION • Wireless receiving antennas are built into the wireless subwoofer and surround speakers. Keep the units away from water and moisture. • For optimal listening performance, mak...

ENG - 14 Manually connecting the Subwoofer or Surround Speakers Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are connected properly. • Make sure that the Soundbar is turned off. 1. Turn off the Soundbar ...

ENG - 16 Auto EQ The Auto EQ technology of Samsung provides more natural and softer bass by calibrating low frequency detected via the mic on the subwoofer. Low frequency usually occurs due to the size of the room and the location of the subwoofer.• Ensure the subwoofer is placed at least 8 cm away ...

ENG - 17 05 CONNECTING TO A TV Connecting the TV that supports HDMI ARC (Audio Return Channel) CAUTION • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC. ...

ENG - 18 Connecting using an Optical Cable Pre-connection Checklist • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • When you use an optical cable and the terminals have covers, be sure to remove the covers. OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) Optic...

ENG - 19 Connecting via Bluetooth When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.• Only one Samsung TV can be connected at a time.• Samsung TV that supports Bluetooth can be connected. Check the specifications of your TV. PAIR 5 Sec OR Top of ...

ENG - 21 Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, “ TV+Soundbar ” appears under the Sound Output menu of the TV. Select the corresponding menu. TV menu...

ENG - 22 Using the Spacefit sound Provides optimized sound quality by analyzing the listening spaces. Method 1. Connecting via Soundbar To enable this function, turn on the Spacefit sound mode with the remote control of the Soundbar. ( ( Sound Control ) → “Spacefit sound Off” → ( Up ) → “ Spacefit s...

ENG - 23 06 CONNECTING AN EXTERNAL DEVICE Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos / DTS:X decoding and playback) Pre-connection Checklist • If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.• Make sure that the content supports Dolb...

ENG - 24 Method 2. Connecting using an Optical Cable DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT BD / DVD player / Set- top box / Game console Top of the Soundbar D.IN Optical Cable (not supplied) Bottom of the Soundbar 1. Use an optical cable (not supplied) to connect the DIGITAL AUDIO IN (OPTICAL) on t...

ENG - 25 07 CONNECTING A MOBILE DEVICE Method 1. Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on. PAIR 5 Sec OR ...

ENG - 26 • A Bluetooth device may experience noise or malfunction under in the following conditions: ‒ When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar ‒ In corners or when there is an obstacle in proximity, such as a wall or partition, where electrical cha...

ENG - 28 Using the Tap Sound Tap the Soundbar with your mobile device to play the sound of content on the mobile device through the Soundbar. • This function may not be supported, depending on the mobile device.• This function is only compatible with Samsung mobile devices with Android 8.1 or later....

ENG - 29 08 CONNECTING VIA APPLE AIRPLAY 2 • This feature may not be available in some countries.• This Samsung Soundbar supports AirPlay 2 and requires iOS 11.4 or later. With AirPlay 2, you can stream music, podcasts, and other audio from your Apple devices to the Samsung Soundbar.• Make sure the ...

ENG - 30 09 INSTALLING THE WALL MOUNT Installation Precautions • Install on a vertical wall only.• Do not install in a place with high temperature or humidity.• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point. ...

ENG - 31 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws . • Insert the Holder-Screws into the wide (bottom)...

ENG - 32 As illustrated in the image, align the centre of the Soundbar with the centre of the TV, carefully place the Soundbar onto the TV stand. At this time, place the microphones at the front of the stand not to interfere with voice recognition. Right end of Soundbar TV NOTE • Make sure the Sound...

ENG - 33 Initialisation Top of the Soundbar INIT With the Soundbar on, press the (Volume) buttons on the body at the same time for at least 5 seconds. “ INIT ” appears on the display and then the Soundbar is initialised. CAUTION • All the settings of the Soundbar are initialised. Be sure to perform ...

ENG - 35 13 LICENCE Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2021 Dolby Laboratories. All rights reserved. For DTS patents, s...

ENG - 36 16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-Q990B Weight 7.7 kg Dimensions (W x H x D) 1232.0 x 69.5 x 138.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIERRated Output power (18 W x 4) + (10 W x 2) + (18 W x 2) + (10 W x 1) + (18 W x...