Pelco PV1016RN - Manuals

Pelco PV1016RN – Manual in PDF format online.

Manuals:

Manual Pelco PV1016RN

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - PV110 Modem DIP Switch Settings; Programming a Transmitter Number for Call-up; NOTE; Site; Dialing a Transmitter Phone Number; Figure 2. Front Panel

■ Set the DIP switches on the rear of the PV110 modem according to the table below. PV110 Modem DIP Switch Settings 1 2 3 4 5 6 7 8 ON ON OFF OFF ON ON OFF OFF ■ Connect the modem or terminal adapter to the Receiver using the supplied cable. ■ Connect the Receiver to an approved power source. ■ Conn...

Page 3 - Hardware Setup; PV1016TN Transmitter with PV120 Terminal Adapter*; BACK-TO-BACK RECEIVER AND TRANSMITTER SETUP; SETTING UP A TRANSMITTER TO RECEIVE A CALL

Hardware Setup ■ Remove the DIP switch cover from the rear of the Transmitter and set SW 1 and SW 2 according to the appropriate table. PV1016T Transmitter with PV110 Modem 1 2 3 4 5 6 7 8 SW 1 ON ON OFF OFF ON ON OFF OFF SW 2 ON OFF OFF OFF OFF OFF OFF OFF PV1016TN Transmitter with PV120 Terminal A...

Page 4 - TROUBLESHOOTING; PROBLEM; Transmitter, PV1016T models

TROUBLESHOOTING PROBLEM POSSIBLE CAUSE FIX ■ Cannot access the telephone Receiver is configured in the Leased Set the DIP switches on the back of the directory to call Transmitter site. Line mode. Receiver to the correct modem setting. ■ Selected number does not dial Telephone number is programmed i...

Pelco Manuals