Pelco PMCLNBWMT - Manuals

6 C 2258 M (5/11) PACKAGE CONTENTS Figure 1. Package Contents Tilt Wall Mount Parts: Wall Plate (1 ea .) Mounting Brackets (2 ea .) 5/16" Flat Washers (6 ea .) Universal Spacers (24 ea .) Security Barrel (1 ea .) Universal Washers (6 ea .) Thread Depth Indicator (1 ea .) Pro Mounting Hardware Pa...

8 C 2258 M (5/11) Installing the Wall Plate Directional Mounting Arrow The Directional Mounting Arrow stamped into the top of the PMCLNBWMT wall mount indicates which edge is the top (Figure 3) . Mounting Safety Two people are recommended for the installation of this mount . Figure 3. Locating the D...

9 C 2258 M (5/11) You must secure the wall plate to two wall studs with a minimum of four lag bolts (two lag bolts for each stud found) . 1 . Use a stud finder (not included) to determine the exact center of wall studs in the vicinity of the wall plate . 2 . Use a pencil (not included) to mark the e...

12 C 2258 M (5/11) 13 . Insert one 5/16" x 3" lag bolt and one 5/16" washer into each pilot hole (Figure 11) .14 . Tighten all lag bolts using a socket wrench and ½" socket . Do not overtighten the lag bolts when attaching the mount to the wall . Improper installation may result in p...

15 C 2258 M (5/11) STEEL STUD INSTALLATION The supplied M6 steel stud anchors must be used to install the mount to steel studs . Do not use lag bolts or wood screws (Figure 18) . Steel Stud Anchor Screw Steel Stud Anchor Sleeve Figure 18. Steel Stud Components 1 . Identify the general location on th...

18 C 2258 M (5/11) Installing the Mounting Bracket 1 . Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel .2 . Use a pencil to mark the depth of the threaded insert on the small straw or toothpick .3 . Mark the straw or toothpick 1/8" above the depth ...

19 C 2258 M (5/11) UNIVERSAL WASHER INSTALLATION The Universal Washers and Spacers are designed to accommodate the various M4, M5, M6 and M8 hole sizes required by flat-panels (Figure 27) . Do not place excessive pressure on the back of the flat-panel, as this may damage your flat-panel . The Univer...

20 C 2258 M (5/11) UNIVERSAL SPACER INSTALLATION Universal Spacers allow you to attach the mounting bracket to flat-panels which have recessed or uneven mount points . Each Universal Spacer adds ¼" to the distance between the mounting bracket and your flat-panel . The Universal Spacers must be s...

21 C 2258 M (5/11) ATTACHING THE MOUNTING BRACKET TO THE FLAT-PANEL This section presumes that you have read and understood these sections: • Selecting the Proper Mounting Hardware • Universal Washer Installation • Universal Spacer Installation 1 . Place your flat-panel screen-side down on a soft, f...

24 C 2258 M (5/11) Mounting Bracket Adjustments If your flat-panel is tilted too far to one side, the leveling screws will allow you to compensate for this tilt by simply adjusting the screws with a screwdriver .1 . Loosen both locking screws (Figure 35) .2 . Adjust the tilt of your flat-panel .3 . ...

25 C 2258 M (5/11) Tilt Adjustment 1 . Place one hand at the center top edge of the flat-panel .2 . Place the other hand on the center bottom edge of the flat-panel .3 . Using the upper hand, gently pull the top of the flat-panel towards you while the lower hand gently pushes the bottom of the flat-...

26 C 2258 M (5/11) Utilizing the Security Barrel The mount includes one Security Barrel which can provide additional theft deterrence for your flat-panel when used with a padlock or other locking system (not included) . To use a padlock:1 . Place the locking hook through the hole of the security bar...

27 C 2258 M (5/11) Warranty 2-10-10 The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC . REVISION HISTORYManual# Date Comments C2258M 5/11 Original Version Pelco, the Pelco logo, Camclosure, Digital Sentry, Endura, Espr...