Pelco FR85011 - Manuals - manualsarea.com

Page 4 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE

4 C1642M-A (1/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire...

Page 5 - Important Safety Instructions

C1642M-A (1/05) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...

Page 7 - Product Overview; DESCRIPTION

C1642M-A (1/05) 7 Product Overview DESCRIPTION The FT85011/FR85011 fiber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber. In addition, patent-pending technology provides the solution for all...

Page 9 - MODELS; OPTIONAL ACCESSORIES

C1642M-A (1/05) 9 MODELS The FT85011/FR85011 fiber transmitter and receiver consist of the following series of m odels: Multimode Models: FT85011MSTR Single-channel fiber optic video transmitter/data transceiver; multimode, ST connector FR85011MSTR Single-channel fiber optic video receiver/data tran...

Page 10 - FRONT PANEL

10 C1642M-A (1/05) FRONT PANEL The front panel of the FT85011 transmitter and the FR85011 receiver provides LED indicators that allow you to monitor data activity, signal status, and operating power (refer to Figure 2). Figure 2. Front Panel of FT85011 Transmitter and FR85011 Receiver DATA TX LED DA...

Page 11 - REAR PANEL

C1642M-A (1/05) 11 REAR PANEL All connections to the FT85011 transmitter and FR85011 receiver are made to the rear panel of the modules (refer to Figure 3). Figure 3. Rear Panel of FT85011 Transmitter and FR85011 Receiver RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack...

Page 12 - Installation; PACKAGE CONTENTS; DATA COMMUNICATION SETUP

12 C1642M-A (1/05) Installation PACKAGE CONTENTS The following items are supplied: • With the FT85011 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC input, 12 VDC output 1 Wall clip with two 4-40 x ...

Page 13 - MOUNTING; Data Communication

C1642M-A (1/05) 13 With the FT85011 transmitter/FR85011 receiver powered off, set the Data Selection switch to the required data communication using a small screwdriver. Refer to Table A for data commu-nication switch settings. Note the following: • The FT85011 transmitter/FR85011 receiver allows da...

Page 14 - Mounting the Transmitter/Receiver Using the Wall Clip

14 C1642M-A (1/05) MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK Optional fiber rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack, are designed for installation of multiple modules: • The RK5000PS-3U fiber rack mount chassis provides 12 module slots...

Page 16 - CONNECTIONS

16 C1642M-A (1/05) CONNECTIONS Connections to the FT85011 transmitter and the FR85011 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone modu...

Page 24 - Troubleshooting; Indicator Color; Video Present LED

24 C1642M-A (1/05) Troubleshooting LED indicators on the front panel of the FT85011 transmitter/FR85011 receiver (refer to Figure 2) allow you to monitor signal status, data activity, and operating power. Table C pro-vides information about the front-panel indicators and associated troubleshooting g...

Page 25 - Carrier Detect LED

C1642M-A (1/05) 25 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the transmitter. Carrier Detect LED is also red. Refer to the Carrier Detect LED troubleshooting section below. Video source is not powered ...

Page 28 - Specifications; VIDEO

28 C1642M-A (1/05) Specifications VIDEO Number of Channels 1 Modulation Type Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.5 MHz Gain Unity Differential Gain <2% Differential Phase <1° Tilt <1% Signal-to-Noise Ratio >60 dB (CCIR w...

Page 31 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic...