Pelco FR8316 - Manuals - manualsarea.com

Page 4 - Important Safety Instructions

4 C2603M (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...

Page 5 - RISK OF ELECTRIC SHOCK.

C2603M (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying...

Page 6 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE

6 C2603M (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ...

Page 7 - Product Overview; DESCRIPTION

C2603M (6/06) 7 Product Overview DESCRIPTION The FT8316/FR8316 fiber transmitter and receiver provide the ability to transmit up to 16 composite video channels over one optical fiber (refer to Figure 1). Figure 1. Sixteen-Channel Video FT8316 Transmitter and FR8316 Receiver Features of the FT8316/FR...

Page 8 - MODELS; OPTIONAL ACCESSORIES

8 C2603M (6/06) MODELS The FT8316/FR8316 fiber transmitter and receiver consist of the following series of models: Multimode Models:* FT8316MSTR Sixteen-channel fiber optic video transmitter; multimode, ST connector FR8316MSTR Sixteen-channel fiber optic video receiver; multimode, ST connector Singl...

Page 9 - FRONT PANEL; FRONT PANEL - FT8316 TRANSMITTER

C2603M (6/06) 9 FRONT PANEL The front panel of the FT8316 transmitter and FR8316 receiver provides LED indicators that a llow you to monitor signal status, laser status (transmitter only), and operating power. The following sections provide a view of the front panel of the transmitter and receiver. ...

Page 10 - FRONT PANEL - FR8316 RECEIVER

10 C2603M (6/06) FRONT PANEL - FR8316 RECEIVER Figure 3 illustrates the front panel of the FR8316 receiver. Figure 3. Front Panel of FR8316 Receiver For detailed information about the front-panel indicators, refer to the Troubleshooting section. VIDEO PRESENT LEDs 1-16 OPTIC FAULT LED, optical signa...

Page 11 - REAR PANEL

C2603M (6/06) 11 REAR PANEL Connections to the FT8316 transmitter and FR8316 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8316 Transmitter and FR8316 Receiver For additional information about rear-panel connections, refer to the Installation secti...

Page 12 - PACKAGE CONTENTS; MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK

12 C2603M (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8316 transmitter or FR8316 receiver 1 Regulated switching power supply with either of the following: • Four plug adapters (North American, Australian, U.K., and European); 100-240 V AC, 50-60 Hz input, 12 VDC (25 W)...

Page 13 - CONNECTIONS

C2603M (6/06) 13 CONNECTIONS Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. ...

Page 14 - Troubleshooting; Indicator Color

14 C2603M (6/06) Troubleshooting LED indicators on the front panel of the FT8316 transmitter and FR8316 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), and operating power. Table A provides information about the front-p...

Page 15 - Optic Fault LED - Transmitter

C2603M (6/06) 15 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans-mitter. Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table. Video source is not powered on. ...

Page 16 - Optic Fault LED - Receiver

16 C2603M (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter. – No action required. Red The optical signal is not being received from the transmitter. Transmitter is not powered on. Check power connections. Replace power supply if necessary. Fiber optic...

Page 17 - VIDEO

C2603M (6/06) 17 Specifications VIDEO Number of Channels 16 Modulation Type Pulse code modulation, 8-bit resolution Video Input (FT8316)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8316) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.58 MHz Differential Gain <1% Different...

Page 19 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic ...