Pelco C2453M-D (2/06) - Manuals

Page 5 - Welcome

C2453M-D (2/06) 5 Welcome Thank you for purchasing Pelco's IPS-RMK, the remote monitor kit designed to assist in the installation and servicing of Spectra III ™ SE/Spectra III, Spectra ® Mini, Esprit ® , or ExSite ™ systems. Use the remote monitor kit to observe video, verify operation of the PTZ co...

Page 6 - Getting Started; TEST THE HANDHELD TO ENSURE IT IS READY FOR USE

6 C2453M-D (2/06) Getting Started Before using the remote monitor kit, do the following: 1. Test the handheld to make sure it is ready for use. 2. Install the batteries for the monitor. TEST THE HANDHELD TO ENSURE IT IS READY FOR USE Batteries and software for the handheld were installed at the fact...

Page 7 - INSTALL THE MONITOR BATTERIES; Reinstall the battery pack onto the monitor.

C2453M-D (2/06) 7 INSTALL THE MONITOR BATTERIES The battery pack located on the back of the monitor holds 8 AA or 10 NiCad rechargeable batteries (batteries not included). To install the batteries, do the following: 1. Remove the mointor from the monitor compartment of the IPS-RMK (refer to Figure 1...

Page 8 - How to Assemble the Remote Monitor Kit

8 C2453M-D (2/06) How to Assemble the Remote Monitor Kit Refer to Figure 4 for the following steps. Lift the handheld compartment. Open the bottom flap of the cable pouch. Pull the serial cable for the handheld out through the bottom of the pouch and connect to the bottom of the handheld. Secure exc...

Page 11 - How to Adjust the Monitor

C2453M-D (2/06) 11 How to Adjust the Monitor Figure 9. Monitor Controls NTSC/PAL switch: Set the NTSC/PAL switch to the correct setting for your location. Manual/Auto switch: Select Auto to use the preset standard color adjustment. Set to Manual to set the color, tint, and brightness manually. Color...

Page 13 - PTZ CONTROL MENU

C2453M-D (2/06) 13 PTZ CONTROL MENU OPEN (Iris Open): Tap the OPEN button to make a selection. CLOSE (Iris Close): Tap the CLOSE button to cancel a selection. NEAR (Focus Near): Tap the NEAR button to focus near. FAR (Focus Far): Tap the FAR button to focus far. IN (Zoom In): Tap the IN button to zo...

Page 14 - How to Upload Software; Assemble the remote monitor kit. Refer to

14 C2453M-D (2/06) How to Upload Software Operating software and language fi les can be uploaded to a Spectra III Series, Spectra Mini, or ExSite system. The latest version of the control/upload utility is installed on the handheld. To upload future revisions, refer to How to Download Software to th...

Page 15 - HOW TO DOWNLOAD SOFTWARE TO THE HANDHELD

C2453M-D (2/06) 15 3. Enter the name of the software title where the blinking cursor appears on the screen. Figure 14. Enter Software Title 4. Tap the Upload button. The software upload starts. 5. Wait until "Done" appears on the screen before unplugging the RJ-45 cable. HOW TO DOWNLOAD SOFT...

Page 16 - Troubleshooting

16 C2453M-D (2/06) Troubleshooting Error Message Explanation Please Choose a File To Upload No file was specified before clicking Upload. File Not Found The file specified is not on the handheld device. Go to the handheld information screen to verify the file exists. Use the HotSync function to inst...

Page 17 - Specifications

C2453M-D (2/06) 17 Specifications IPS-RMK Handheld Size 4.7" H x 3.1" W x .7" D (11.9 x 7.9 x 1.8 cm) Weight 4.4 oz (.20 kg) Memory 8 MB Battery 2 AAA batteries Display Advanced LCD with backlight Expansion Serial port Operating System Palm OS compatible, version 3.5 or higher HotSync ® ...

Page 18 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic...