NEC NP01WK - Manuals - manualsarea.com

Page 2 - Wall Mount Unit; NP01WK/NP01WK1 Installation and Adjustment Manual; To the Dealer and Installer; CONTENTS

ENG-1 Wall Mount Unit NP01WK/NP01WK1 Installation and Adjustment Manual Thank you for your purchase of this NEC wall mount unit.Please read this installation and adjustment manual carefully to ensure proper use.The Wall Mount Unit NP01WK/NP01WK1 is exclusively for Projector U300X/U250X/U310W/U260W a...

Page 3 - Please heed the following; Symbol; Warning

ENG-2 ENG-3 Please heed the following  Symbol In this “Installation and Adjustment Manual”, to ensure the safe and proper use of the product, prevent harm to yourself and others and damage to property, various symbols are used. The symbols and meanings are as follows. Please read this manual after ...

Page 4 - Caution

ENG-2 ENG-3 Warning • Do not install in places subject to constant vibration. Extended vibration may cause loosening of the screws and result in the Wall Mount Unit and projector falling and causing injury. Also, it may cause breakdown of the projector. • To ensure safety, be sure to tighten the bol...

Page 5 - Preparation; Packaged Parts

ENG-4 ENG-5 Preparation  Packaged Parts Please check the packaged items. Wall adapter:1 Arm:1 Projector adapter:1 Wall plate:1 *1 M5 screws:4 *2 *1, *2:To be used when mounting the wall adapter in the North America region. Cover (A, B):2 pairs Arm cover:1 Plate (B):1 M4 screws:4M3.5 screws:2 Hex wr...

Page 6 - Names of Parts

ENG-4 ENG-5 Vertical adjust/ Arm fixation knobs Arm cover Elongate hole for screw (or bolt) (4 parts) Covers (A, B) Plate (A) Arm fixation screw Grooves for wiring Arm Tilt adjust knobs (4 parts) Central axis Wall adapter Cover (B, A) Projector adapter Projector fixation plate Horizontal adjust scre...

Page 7 - Dimensions of Parts:

ENG-6 ENG-7  Dimensions of Parts: (unit: mm) The dimensions of the positions of the wall fixation screws (bolts) of the wall adapter are described. 142 100 100 142 100 100 189 90 - 190 189 219 120 320 280 Projector bottom surface (including the feet) 533 (minimum) -733 (maximum) The center of the w...

Page 8 - Mounting the Projector; Preparations; Attach the projector adapter to the projector.

ENG-6 ENG-7 Mounting the Projector Preparations 1. Determine the installation location of the screen, and accordingly decide the installation position of the wall mount unit. Refer to the section "Installation" in the user’s manual included with the projector for more information. • Installa...

Page 9 - Attach the wall adapter to the structural material of the wall.

ENG-8 ENG-9 c Align the projector adapter with the holes on the bottom of the projector and securely attach the adapter with the four supplied screws (M4x20). d Loosen the vertical adjust/arm fixation knobs of the projector adapter. Caution Do not try to attach the projector adapter without the foam...

Page 10 - Mount the projector assembled in step 1 on the arm.

ENG-8 ENG-9 b a 3. Attach the arm to the wall adapter. a Loosen the arm fixation screws (top and bottom) with the supplied hex wrench. b Insert the arm plate (A) into the wall adapter from the top and tighten the screws (top and bottom) near the center of the elongated hole. * The covers (A) and (B)...

Page 12 - This concludes the projector installation.

ENG-10 ENG-11 5. Cabling a The power cord and signal cables can be passed through the grooves for wiring on the left and right side of the arm. This should be done before attaching the arm cover. Take care not to squeeze the cables with the horizontal adjust screws. This concludes the projector inst...

Page 13 - Adjusting the Projection Position; Before adjusting; Adjust the size of the projected image and the left/right tilt.

ENG-12 ENG-13 Adjusting the Projection Position  Preparations Before adjusting • Project an image from the projector, then first use the focus lever of the projector to roughly adjust the focus of the projected image. For information on how to project an image, see “Installation” in the user’s manu...

Page 14 - Adjust the horizontal tilt of the projector.; ae

ENG-12 ENG-13 d c c Turn the left or right knob to adjust projector tilt in the left or right direction. - When the knob shown in black in the illustration i s t i g h t e n e d , t h e p r o j e c t o r i s r o t a t e d i n t h e counterclockwise direction. d When the adjustment is complete, tight...

Page 15 - Front/rear tilt adjustment; Left/right tilt adjustment

ENG-14 ENG-15 4. Adjust the tilt. Tilt adjustment is performed with the four adjustment knobs.  Front/rear tilt adjustment Adjust together Rotation axis Adjust together Rotation axis  Left/right tilt adjustment Fine adjustment in same direction as for vertical adjustment • If tilt adjustment achie...

Page 16 - Attach the covers to the projector adapter and the wall adapter.

ENG-14 ENG-15 5. Attach the covers to the projector adapter and the wall adapter. a Attach cover (A) (with hook) and cover (B) (with notch) to the upper side of the wall adapter. Slide the two covers towards the center while pushing them down, as shown in the illustration. The bottom of each cover w...

Page 17 - Specifications; Using the wall plate

ENG-16 Specifications Product name: Wall mount unit Model: NP01WK/NP01WK1 Adjustment angle: Up-down angle ±3°, left-right angle ±3°, inclination angle ±10° Adjustment width: Front-rear ±100 mm, left-right ±50 mm, up-down ±50 mm External dimensions: 280 (W) x 541(D) x 219 (H) mmWeight: Approx. 6.2kg ...