Page 2 - Index
Index Declaration of conformity ............................................................................................................................. English-1Important Information ..................................................................................................................
Page 3 - English; For USA; For Canada; Declaration of conformity
English-1 English For USA FCC Information 1. Use the attached specified cables with the MultiSync LCD8205 (L828N0)/MultiSync LCD8205-P (L828N0) color display so as not to interfere with radio and television reception.(1) Please use the supplied power cord or equivalent to ensure FCC compliance.(2) P...
Page 4 - Important Information; WARNING; Declaration; Declaration of the Manufacturer
English-2 Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOTUSE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESSTHE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLT...
Page 5 - Safety Precautions, Maintenance & Recommended Use
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...
Page 6 - Contents; Setup Manual
English-4 Contents Power Cord* 1 Setup Manual DVI-D to DVI-D cable Wireless Remote Control and AAA Batteries Clamp Your new MultiSync LCD monitor box* should contain the following: • LCD monitor • Power Cord* 1 • Video Signal Cable • Setup Manual • Wireless Remote Control and AAA Batteries • Clamp •...
Page 7 - Mounting; Installation; Orientation
English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...
Page 8 - Attaching Mounting Accessories; Attach eyebolts for mounting; Ventilation Requirements; Attach Mounting Accessories
English-6 4. Attach Mounting Accessories The display is designed for use with the VESA mountingsystem. When using mounting accessories other than NECcompliant and approved, they must comply with the VESA-compatible mounting method. NEC strongly recommendsusing screws M8 size and 10 - 18 mm in length...
Page 9 - Control Panel; Parts Name and Functions
English-7 English 1 POWER button ( ) Switches the power on/off. 2 CH +/- button Acts as button to move the highlighted area up or downto select adjustment items within OSD menu. 3 VOL +/- button Increases or decreases audio output level.Increases or decreases the adjustment level within OSDmenu sett...
Page 10 - Terminal Panel
English-8 Terminal Panel 1 HDMI connector To input digital HDMI signals. 2 DVI IN (DVI-I) To input digital or analogue RGB signals from a computer. 3 SPDIF Optical digital audio out for HDMI input only. 4 EXTERNAL CONTROL (D-Sub 9 pin) Connect RS-232C input from external equipment such as aPC in ord...
Page 11 - Wireless Remote Control; Handling the remote control
English-9 English NOTE: The button without explanation doesn’t work. 1 POWER button Switches the power on/off. 2 SOURCE button Enter Input Source OSD menu, [DVI], [PC], [HDMI], [AV1],[AV2], [S-Video] and [Component]. 3 MUTE button Turns on/off mute function. 4 INFO button Turns on/off the informatio...
Page 12 - Setup
English-10 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: IN ORDER TO AID IN MOUNTING, A LIFTINGDEVICE MUST BE USED IN CONJUNCTIONWITH THE ATTACHABLE EYEBOLTS.MOVING OR INSTALLING TH...
Page 13 - Switch on the power of all the attached; Recommended Adjustments
English-11 English 5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power ofthe computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when req...
Page 14 - Connections; Before making connections:; Connecting a Personal Computer; Connect the LCD Monitor to a Personal Computer
English-12 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to d...
Page 15 - Connect the LCD Monitor to a DVD Player; Connecting a DVD Player with component out
English-13 English Connect the LCD Monitor to a DVD Player • To connect the Component connector (RCA) on the LCD monitor, use an RCA connector cable (sold separately). Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refe...
Page 17 - Basic Operation; Power ON and OFF Modes
English-15 English Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. Power Button
Page 18 - Power Indicator; Using Power Management; Picture Size
English-16 Power Indicator Mode Power ON Power OFF (Standby)*Power consumption under 1W Power SavePower consumption under 15W Not connected Using Power Management The LCD monitor follows the VESA approved DPM PowerManagement function.The power management function is an energy savingfunction that aut...
Page 23 - Controlling the LCD monitor via RS-232C Remote Control
English-21 English Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Moni...
Page 24 - Features
English-22 Features Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OSD (On-Screen-Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to use on-screen...
Page 25 - Troubleshooting
English-23 English Troubleshooting No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported m...
Page 26 - Specifications
English-24 Specifications Product Specifications LCD Module 81.6"/207 cm diagonal Pixel Pitch: 0.744 mm Resolution: 1920 x 1080 dots Color: Over 16 million colors (depending on video card used) Brightness: 600 cd/m 2 (Typ.) (LCD8205)/450 cd/m 2 (Typ.) (LCD8205-P) Contrast Ratio: 2000:1 Viewing A...
Page 27 - Pin Assignment
English-25 English Pin Assignment 1) S-VIDEO input: VIDEO Pin No Name 1 GND 2 GND 3 Y (Luminance) 4 C (Chroma) 2) Digital/Analog RGB input: DVI-I 3) RS-232C input Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC...
Page 28 - Manufacturer’s Recycling and Energy Information
English-26 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...