NEC LCD8205-P - Manual

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...

English-4 Contents Power Cord* 1 Setup Manual DVI-D to DVI-D cable Wireless Remote Control and AAA Batteries Clamp Your new MultiSync LCD monitor box* should contain the following: • LCD monitor • Power Cord* 1 • Video Signal Cable • Setup Manual • Wireless Remote Control and AAA Batteries • Clamp •...

English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...

English-6 4. Attach Mounting Accessories The display is designed for use with the VESA mountingsystem. When using mounting accessories other than NECcompliant and approved, they must comply with the VESA-compatible mounting method. NEC strongly recommendsusing screws M8 size and 10 - 18 mm in length...

English-7 English 1 POWER button ( ) Switches the power on/off. 2 CH +/- button Acts as button to move the highlighted area up or downto select adjustment items within OSD menu. 3 VOL +/- button Increases or decreases audio output level.Increases or decreases the adjustment level within OSDmenu sett...

English-8 Terminal Panel 1 HDMI connector To input digital HDMI signals. 2 DVI IN (DVI-I) To input digital or analogue RGB signals from a computer. 3 SPDIF Optical digital audio out for HDMI input only. 4 EXTERNAL CONTROL (D-Sub 9 pin) Connect RS-232C input from external equipment such as aPC in ord...

English-9 English NOTE: The button without explanation doesn’t work. 1 POWER button Switches the power on/off. 2 SOURCE button Enter Input Source OSD menu, [DVI], [PC], [HDMI], [AV1],[AV2], [S-Video] and [Component]. 3 MUTE button Turns on/off mute function. 4 INFO button Turns on/off the informatio...

English-10 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: IN ORDER TO AID IN MOUNTING, A LIFTINGDEVICE MUST BE USED IN CONJUNCTIONWITH THE ATTACHABLE EYEBOLTS.MOVING OR INSTALLING TH...

English-11 English 5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power ofthe computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when req...

English-12 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to d...

English-13 English Connect the LCD Monitor to a DVD Player • To connect the Component connector (RCA) on the LCD monitor, use an RCA connector cable (sold separately). Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refe...

English-15 English Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. Power Button

English-16 Power Indicator Mode Power ON Power OFF (Standby)*Power consumption under 1W Power SavePower consumption under 15W Not connected Using Power Management The LCD monitor follows the VESA approved DPM PowerManagement function.The power management function is an energy savingfunction that aut...

English-21 English Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Moni...

English-22 Features Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OSD (On-Screen-Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to use on-screen...

English-23 English Troubleshooting No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported m...

English-24 Specifications Product Specifications LCD Module 81.6"/207 cm diagonal Pixel Pitch: 0.744 mm Resolution: 1920 x 1080 dots Color: Over 16 million colors (depending on video card used) Brightness: 600 cd/m 2 (Typ.) (LCD8205)/450 cd/m 2 (Typ.) (LCD8205-P) Contrast Ratio: 2000:1 Viewing A...

English-25 English Pin Assignment 1) S-VIDEO input: VIDEO Pin No Name 1 GND 2 GND 3 Y (Luminance) 4 C (Chroma) 2) Digital/Analog RGB input: DVI-I 3) RS-232C input Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC...

English-26 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...