NEC E3100 - Manuals

NEC E3100 – Manual in PDF format online.

Manuals:

Manual

Manual NEC E3100

Summary

Page 2 - NEC VERSA E3100 Disassembly Manual; Table of contents

NEC VERSA E3100 Disassembly Manual Page 2 Table of contents Overview ................................................................................................................................................................3 Technician Notes .......................................................

Page 3 - Overview

NEC VERSA E3100 Disassembly Manual Page 3 Overview This document contains step-by-steps disassembly instructions for VERSA E3100 notebook. The instructions explained how to remove or disassemble a particular part with the help of photos. The size of the screws in used is display on the right side of...

Page 4 - Hazardous Voltage

NEC VERSA E3100 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connect to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authoriz...

Page 6 - Removing the Battery; Perform the following steps to remove the battery:

NEC VERSA E3100 Disassembly Manual Page 6 Removing the Battery Perform the following steps to remove the battery: 1. Make sure to power off the VERSA E3100 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1 Fig. 1 Removing the battery

Page 7 - Removing the Memory and Wireless LAN Module; Removing the

NEC VERSA E3100 Disassembly Manual Page 7 Removing the Memory and Wireless LAN Module To remove the Memory and Wireless LAN Module, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Release the two screws retaining the memory and wireless LAN module cover. Fi...

Page 8 - Removing the Hard Disk Drive; To remove the hard disk drive, first remove the battery (see; HDD module out from the base unit.

NEC VERSA E3100 Disassembly Manual Page 8 Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Remove the screws as shown in Fig. 4 Fig. 4 Removing the Hard disk drive cover 2. Release the screws that s...

Page 9 - Removing the Optical Disk Drive; To remove the ODD, first remove the battery (see; Eject the optical drive using pin as shown in Fig. 7

NEC VERSA E3100 Disassembly Manual Page 9 Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery ) then perform the following steps: 1. Remove the screws retaining the optical drive as shown in Fig. 6 Fig. 6 Releasing the optical drive 2. Eject the opti...

Page 10 - Pull the ODD module out from the base unit as shown in Fig. 8

NEC VERSA E3100 Disassembly Manual Page 10 3. Pull the ODD module out from the base unit as shown in Fig. 8 Fig. 8 Pulling the optical drive out from the base unit

Page 11 - Removing the Keyboard; To remove the Keyboard, first remove the battery (see; Lift up the keyboard cover carefully as shown in Fig. 10; Unscrew the two keyboard screws as shown in Fig. 11

NEC VERSA E3100 Disassembly Manual Page 11 Removing the Keyboard To remove the Keyboard, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Unscrew the keyboard cover from the rear of the system as shown in Fig. 9 Fig. 9 Releasing the keyboard cover 2. Lift up...

Page 12 - Turn the system over, remove another screw as shown in Fig. 12

NEC VERSA E3100 Disassembly Manual Page 12 4. Turn the system over, remove another screw as shown in Fig. 12 Fig. 12 Removing the screw at the bottom of the notebook 5. Lift up the keyboard and disconnect it from the base system as shown in Fig. 13 Fig. 13 Removing the keyboard flex cable M2.5X6.5 B...

Page 13 - Removing the LCD Module; To remove the LCD Module first remove the battery (see

NEC VERSA E3100 Disassembly Manual Page 13 Removing the LCD Module To remove the LCD Module first remove the battery (see Removing the Battery ) and remove the Keyboard (see Removing the Keyboard ) then perform the following steps: 1. Turn the system over and slowly push the wireless LAN cable as sh...

Page 15 - Removing the LCD Panel; To remove the LCD panel, first remove the LCD module (see

NEC VERSA E3100 Disassembly Manual Page 15 Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Module ), then perform the following steps: 1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 16 2. Remove all screws as shown in Fig....

Page 16 - To remove the LCD, remove the 4 screws as shown in Fig. 18

NEC VERSA E3100 Disassembly Manual Page 16 4. To remove the LCD, remove the 4 screws as shown in Fig. 18 Fig. 18 Removing the LCD panel M2.5X4.5 Black

Page 17 - Removing the Switch Board Module; To remove the Switch Board Module first remove the battery (see

NEC VERSA E3100 Disassembly Manual Page 17 Removing the Switch Board Module To remove the Switch Board Module first remove the battery (see Removing the Battery ) and remove the Keyboard (see Removing the Keyboard ) then perform the following steps: 1. Unscrew the screw on the switch board and detac...

Page 18 - Removing the Top Cover Assembly; To remove the Top Cover Assembly first remove the battery (see

NEC VERSA E3100 Disassembly Manual Page 18 Removing the Top Cover Assembly To remove the Top Cover Assembly first remove the battery (see Removing the Battery ), remove the Keyboard (see Removing the Keyboard ) and remove the LCD module ( See Removing LCD module) then perform the following steps: 1....

Page 20 - Removing the Main Board; To remove the Main Board, first remove the Top Cover Assembly (see; Remove the two hex screws from the VGA port as shown in Fig. 24

NEC VERSA E3100 Disassembly Manual Page 20 Removing the Main Board To remove the Main Board, first remove the Top Cover Assembly (see Removing Top Cover Assembly ) then perform the following steps: 1. Remove the 6 screws and detached the three connectors as shown on Fig 23 Fig. 23 Removing screws an...

Page 22 - Removing the CPU; To remove the CPU first remove the main board (see

NEC VERSA E3100 Disassembly Manual Page 22 Removing the CPU To remove the CPU first remove the main board (see Removing Main Board ) then perform the following steps: 1. Disconnect Fan connection and remove the CPU Heat sink screws in descending order (5 Æ 4 Æ 3 Æ 2 Æ 1), then lift up the CPU heat s...

Page 23 - Removing the MDC Modem; To remove the MDC Modem, first remove the main board (see; Removing the Touch Pad; To remove the touch pad, first remove the top cover (see

NEC VERSA E3100 Disassembly Manual Page 23 Removing the MDC Modem To remove the MDC Modem, first remove the main board (see Removing Main Board ) then perform the following steps: 1. Unscrew the two screws and disconnect the connector as shown on Fig. 28 Fig. 28 Removing MDC modem Removing the Touch...

Page 24 - Removing the Bluetooth Module; To remove the Bluetooth Module, first remove the main board (see; Removing the Speaker Assembly; To remove the Speaker Assembly, first remove the Main Board (see; Carefully remove the Speaker assembly from Bottom Cover.; Screws

NEC VERSA E3100 Disassembly Manual Page 24 Removing the Bluetooth Module To remove the Bluetooth Module, first remove the main board (see Removing Main Board )), then perform the following steps: 1. slowly remove the Bluetooth module from the bottom cover as shown in Fig. 30 Fig. 30 Bluetooth Module...

Page 25 - Notice; VERSA E3100 Disassembly Manual

NEC VERSA E3100 Disassembly Manual Page 25 Notice The information in this guide is subject to change without notice. This guide contains information protected by copyright act. No part of this guide is to be photocopy or reproduced without written consent from NEC Computers Asia Pacific. NEC COMPUTE...