NEC E3100 - Manual

NEC E3100

NEC E3100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
Page: / 25

Table of Contents:

  • Page 2 – NEC VERSA E3100 Disassembly Manual; Table of contents
  • Page 3 – Overview
  • Page 4 – Hazardous Voltage
  • Page 6 – Removing the Battery; Perform the following steps to remove the battery:
  • Page 7 – Removing the Memory and Wireless LAN Module; Removing the
  • Page 8 – Removing the Hard Disk Drive; To remove the hard disk drive, first remove the battery (see; HDD module out from the base unit.
  • Page 9 – Removing the Optical Disk Drive; To remove the ODD, first remove the battery (see; Eject the optical drive using pin as shown in Fig. 7
  • Page 10 – Pull the ODD module out from the base unit as shown in Fig. 8
  • Page 11 – Removing the Keyboard; To remove the Keyboard, first remove the battery (see; Lift up the keyboard cover carefully as shown in Fig. 10; Unscrew the two keyboard screws as shown in Fig. 11
  • Page 12 – Turn the system over, remove another screw as shown in Fig. 12
  • Page 13 – Removing the LCD Module; To remove the LCD Module first remove the battery (see
  • Page 15 – Removing the LCD Panel; To remove the LCD panel, first remove the LCD module (see
  • Page 16 – To remove the LCD, remove the 4 screws as shown in Fig. 18
  • Page 17 – Removing the Switch Board Module; To remove the Switch Board Module first remove the battery (see
  • Page 18 – Removing the Top Cover Assembly; To remove the Top Cover Assembly first remove the battery (see
  • Page 20 – Removing the Main Board; To remove the Main Board, first remove the Top Cover Assembly (see; Remove the two hex screws from the VGA port as shown in Fig. 24
  • Page 22 – Removing the CPU; To remove the CPU first remove the main board (see
  • Page 23 – Removing the MDC Modem; To remove the MDC Modem, first remove the main board (see; Removing the Touch Pad; To remove the touch pad, first remove the top cover (see
  • Page 24 – Removing the Bluetooth Module; To remove the Bluetooth Module, first remove the main board (see; Removing the Speaker Assembly; To remove the Speaker Assembly, first remove the Main Board (see; Carefully remove the Speaker assembly from Bottom Cover.; Screws
  • Page 25 – Notice; VERSA E3100 Disassembly Manual
Loading the manual

VERSA E3100

Disassembly Manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NEC VERSA E3100 Disassembly Manual; Table of contents

NEC VERSA E3100 Disassembly Manual Page 2 Table of contents Overview ................................................................................................................................................................3 Technician Notes .......................................................

Page 3 - Overview

NEC VERSA E3100 Disassembly Manual Page 3 Overview This document contains step-by-steps disassembly instructions for VERSA E3100 notebook. The instructions explained how to remove or disassemble a particular part with the help of photos. The size of the screws in used is display on the right side of...

Page 4 - Hazardous Voltage

NEC VERSA E3100 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connect to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authoriz...

Other NEC Models

All NEC Other